The VM-850 location system was specifically developed to
locate and determine the laying depth of metallic water pipes
and gas pipes, as well as cables.
The precisely tuned, medium location frequency of 9.82 kHz
enables the fast and accurate tracing of a metallic pipe or cable.
The determination of depth occurs automatically
at the touch of a button.
The system is distinguished by its user-friendliness, its large
display and large buttons as well as its extensive accessories.

Advantages

Easy to use
High location accuracy
Optimal inductive transmission of line signals
Classic design, compact and light

Accesorii standard

Optiuni recomandate

Alte produse SEBAKMT

TRUSA INCERCARE RIGIDITATE DIELECTRICA CABLURI 40KV DC SEBA T99/1

• Încercarea cu pâna la 40 kV a rigiditatii dielectrice a cablurilor, accesoriilor de pe cabluri, echipamentelor si instalatiilor
• Masurarea curentului în 3 domenii: 200 uA, 2 mA, 20 mA
• Alimentare - baterie de 12 V sau de la retea 230 V
• Temporizator integrat, reglabil între 0 si 60 minute
• Limitarea tensiunii de iesire
• Oprire în caz de supracurent

PUNTE MASURA DEFECTE CABLURI RETELE COMUNICATII SEBA KMK 8

• Integrated Reflectometer (TDR)
• Active bridge for high precision R and C measurements and DC and AC fault location
• Measurement by Graaf method in connection with an active slave at the far end
• Passive Wheatstone bridge for R and C measurements and DC and AC fault location
• Test Systems for Pre-measurement, Quick test and Quality testing
• Measurement of interference voltages
• Warning and information system
• Remote control for the operation of the electronic far end loop control switch

LOCATOR DE TEVI SI CABLURI INGROPATE SEBA VM-810

• Easy to use
• High location accuracy
• Optimal inductive transmission of line signals
• Signal "jumps over" insulating pipe sleeves

TRUSA INCERCARE CABLURI CU VFL FRECVENTA JOASA SEBA EEASYTEST 20KV

• simplified version of the standard VLF test
• Easy to operate
• Configurable test sequences
• Compact, rugged and lightweight design
• AC, DC and sheath testing in one single system
• Reporting via USB or Winkis

DEFECTOSCOP PENTRU LOCALIZAREA DEFECTELOR PE CABLURI MT/JT SEBA SMART THUMP 16

• 1500J at 8 / 16 kV, 16 kV DC-HV proof test 23/46mA Burning
• Integrated ARM and ICE Prelocation
• Easy Go - automatic sequence to proof test, pre-locate & pinpoint
• Automatic interpretation of test results
• Sunlight readable, transflective 5.7" TFT colour display
• Safe OP Check protects user from incorrect or faulty lead connections
• USB interface for trace export via USB flash drive

CAMERA VIDEO INSPECTIE CONDUCTE CANALIZARE, TEVI SEBA VCAM-5

• Înregistrare prin apasarea unui singur buton
• Constructie usoara si compacta
• Înregistreaza pe USB, card SD sau HDD
• Captura a imaginii în format JPEG
• Interfata Wi-Fi si Ethernet
• Acumulator Li-Ion
• Editor de test performant
• Afisaj LCD de 8" cu înalta rezolutie
• Tastatura protejata la stropire
• Interfata în limba româna

SISTEM DETECTIE DESCARCARE PARTIALA SI DEFECT IZOLATIE CABLU SEBA OWTS M60

• Masurarea PD cu ajutorul DAC similar cu frecventa nominala a retelei
• Procesare online - diagnoza complexa a PD
• Sistem de test portabil, conceptie compacta si usoara
• Masurare integrata a tan d

LOCALIZARE DEFECTE CU PUNERE LA PAMANT IN SISTEME IZOLATE FARA IMPAMANTARE SEBA GEOLUX GL 660-1

• Earth fault locator for fault location in isolated, earth free systems
• Mains filter for direct coupling to live cables up to 660 V
• Pulsed output current for easier detection of the test signal
• Filter for the suppression large interference signals
• Location of earth faults up to 150 kOhm
• No switch off during the fault location required
• No influence to the signal lines connected to

SISTEM INCERCARE CABLURI MEDIE TENSIUNE SEBA VFL SINUS 45KV

• VLF sine wave 45 kV with integrated tanDelta
• compact, robust, and portable
• high-performance test and diagnostic system for medium voltage cables
• Performs cable withstand testing, cable diagnosis, and sheath fault pinpointing
• Automatically adjusts the test frequency to the cable length
• Eliminates hazards to the user and guarantees limited damage to the cable
• Easy field operation with no need for external computer

SISTEM INCERCARE SI LOCALIZARE DEFECTE CABLE SEBA SURGEFLEX SFX-32

• Încercare cu pâna la 32 kV
• Prelocalizare:
• o Masurarea impulsului reflectat
• o ARM® (Metoda reflexiei arcului)
• o Metoda cuplarii în curent 8 / 16 / 32 kV
• Ardere (modificarea defectului) pâna la 32 kV
• Localizarea traseului (optional)
• Localizare exacta: o Masurarea distantei / câmpului acustic(8 / 16 / 32 kV cu 1750 / 3500 J)
• o Localizarea defectelor de manta (0 � 5 kV cu limitare în curent)