Sarcina testare descarcare baterii UPS-uri Megger TORKEL 820

Cod: Megger TORKEL 820 BS-49092 TLX830 TLX850 Programma


 

Brosura produs PDF, 0.49 Mb
           

Descriere

• Combines efficiency with portability

• Batteries can be tested "in service"

• Discharge 24 and 48 V batteries at a current of 270 A 
• 12 V batteries at 135 A
• Two or more TORKEL 820 units and/or extra load units TXL, can be linked together if you need higher current. 
• Discharging proceeds at constant current, constant power or constant resistance, or in accordance with a pre-selected load profile.

Batteries can be tested "in service"

 

??Unit adjusts to include load currents in the test parameters

??User adjustable alarm and shutdown points to avoid excessive discharge

??View test parameters/results "real time" as testing progresses using TORKEL WIN

software

??Easily save results to a PC for analysis, report generation and storage

 

 

 

During a power outage, crucial telecommunication and radio equipment must be kept operating by batteries. Unfortunately, however, the capacity of such batteries can drop significantly for a number of reasons before their calculated life expectancy is reached. Battery capacity should thus be checked to prevent expensive downtime in the event of a power failure.

 

Accesorii standard

TORKEL 820

Complete with:

  • Cable set GA-00554
  • Transport case GD-00054 BS-49092
 

Optiuni recomandate

Optional

TORKEL Win PC software BS-8208X

Extra loads

TXL830 BS-59093

TXL850 BS-59095

 

Cable sets

Cable set for TXL830 and TXL850 2 x 3 m, 70 mm2, with cable lug. Max 100 V 270 A. Weight: 5.0 kg (11 lbs) GA-00554

Sensing lead set

Cable set for measuring voltage at battery terminals. 2 x 5 m (16.4 ft) GA-00210

Clamp-on ammeters

DC clamp-on ammeter, 200 A To measure current in circuit outside TORKEL XA-12992

DC clamp-on ammeter, 1000 A To measure current in circuit outside TORKEL XA-12990

 

BVM

Including:

Dolphin clips, Power & signal connector, Power supply, Connection cables and Carrying case

BVM150 With TORKEL Win software System of 16 BVM units CJ-59092

BVM300 With TORKEL Win software System of 31 BVM units CJ-59093

BVM600 With TORKEL Win software System of 61 BVM units CJ-59096

BVM150 With PowerDB software System of 16 BVM units CJ-59192

BVM300 With PowerDB software System of 31 BVM units CJ-59193

BVM600 With PowerDB software System of 61 BVM units CJ-59196

 

Alte produse MEGGER

TRUSA CURENT-TENSIUNE VERIFICAREA RELEELOR DE PROTECTIE MEGGER SMRT410

• Small, rugged, lightweight and powerful
• Operates with or without a computer
• Intuitive manual operation with Smart Touch View Interface
• High current, high power output (60 Amps/300 VA rms) per phase
• Flexible output design provides up to 4-phase voltage and up to 10-phase current
• Network interface provides IEC 61850 test capabilities
• Fully automated testing using AVTS software

 

TESTER TDR LOCALIZARE DEFECTE CABLURI MEGGER TDR1000/3

• minimum resolution of 0.1 m and a 5 km maximum range
• Simple operation.
• AUTO set up for instant use.
• Ultra fast pulse for near end fault identification.
• Trace HOLD feature to allow comparison between cables.
• IP54 rating offers real life working.
• Designed for use on all metallic cable pairs.

 

MICRO OHMMETRU 10A MEGGER DLRO10X

• up to 10A current
• Accurate results in under three seconds
• Auto current reversal cancels standing emfs
• Fuse protected to 600 V
• NiMH battery reduces weight
• 250 mW power limit (with optional override) to avoid heating the test sample

 

TRUSA ELECTRICIAN INSTALATII ELECTRICE MEGGER MTK310 MTK320 MTK330

• Three kit options available: Insulation, continuity, earth loop, RCD testing
• MTK310: Standard electrical test kit
• MTK320: Advanced electrical test kit
• MTK330: Result storage and downloading test kit
• Rubber armoured instruments
• Weatherproof IP54
• Test leads included
• Calibration certificates included
• 3 year warranty

 

ELECTRICIAN'S MULTIMETER MEGGER - AVO410

• 6000 count backlit digital display
• True RMS reading on a.c. mode
• 1000 V d.c. / 750 V a.c. ranges
• 10 A a.c. / d.c. ranges

 

TESTER IZOLATIE COMUNICATII MEGGER MIT480/2 MIT481/2 MIT485/2 500V

• Testarea izolaţiei până la 500 V şi intervalul 100 GΩ într-un instrument portabil
• Conexiune cu 3 fire pentru conexiunea A, B şi E (vârf, inel şi împământare/împământare)
• Acces protejat la 500 V pentru a preveni deteriorarea accidentală
• CAT IV 600 V şi IP 54

 

DIGITAL CLAMP METER MEGGER - DCM310 AND DCM320

• Option of current only , DCM310 or multimeter, DCM320 models
• Measures up to 400 A a.c. with low current ranges for improved resolution
• 600 V a.c./d.c. DCM320
• 20 MO Resistance DCM320

 

TRUSA CURENT-TENSIUNE PENTRU VERIFICAREA RELEELOR DE PROTECTIE MEGGER FREJA 306

• current outputs, higher amps (3 x 15 A + 3 x 35 A), VA or compliance voltage.
• test differential relays with 6 currents, or virtually any single or 3-phase relay
• For secondary testing of protection relays
• Can be used stand-alone or with a PC
• Flexble, can test many relay types
• Lightweight and portable
• Greatest possible precision

 

TESTER DE IZOLATIE SI CONTINUITATE CU ALARMA MEGGER - MIT200 SERIES

• Sunt disponibile doua sau trei tensiuni de test asigur½nd solutia ideala pentru majoritatea aplicatiilor din zona tensiunilor joase
• Masurarea rezistentei de izolatie p½na la 1000 M? pe toate domeniile
• Descarcarea automata ne asigura ca toate circuitele sunt descarcate sigur dupa ½ncheierea testelor
• Tensiunea de test a izolatiei de 1000 V are o avertizare de ½nalta tensiune ½nainte de a aplica tensiunea

 

TRUSA MONOFAZATA CURENT-TENSIUNE MEGGER SVERKER 750 780

• The engineer’s toolbox for all single phase relay testing!
• Stand-alone functionality
• Rugged and reliable for field use