204-channel portable logic analyzer
4 GHz (250 ps) timing zoom with 64 K memory
1.0 GHz / 500 MHz (half / full-channel) conventional timing with deep memory
500 MHz transitional timing
up to 450 MHz State clock rates
up to 500 Mb/s Data rates
up to 32 M acquisition memory depth
15-inch (38.1 cm) color display with touch screen available(option 103)
Comprehensive single-ended signal support, threshold is adjustable in -5 V to 5 V (10 mV increments)
Automated threshold/sample position setup for accurate measurements on high-speed buses
Simultaneous eye diagrams on all channels identify problem signals quickly
Selectable memory depths: 1 M, 4 M, 16 M, 32 M

Optiuni recomandate

16800A-0B3	Service Manual
16800A-103	Front Panel with 15 inch display and touchscreen
16800A-109	External removable hard drive for 16800 series logic analyzers
16806A-001	Standard 1 M acquisition memory depth
16806A-004	Increase acquisition memory depth to 4M
16806A-016	Increase acquisition memory depth to 16M
16806A-032	Increase acquisition memory depth to 32M
16806A-500	Increase maximum state speed to 500 Mb/s
16806A-A6J	ANSI Z540 Compliant Calibration
E5346A	Probe, 34 channel single-ended Mictor connector, connects to 40-pin LA cable
E5383A	Probe, 17-channel single-ended flying leads, connects to 40-pin LA cable
E5385A	Probe, 34 channel single-ended Samtec connector, connects to 40-pin LA cable
E5394A	Probe, 34 channel single-ended soft touch connectorless, connects to 40-pin LA cable
E5394A-001	Retention Module
E5396A	Probe, 17 channel single-ended soft touch connectorless, connects to 40-pin LA cable
E5396A-001	Retention Modules
E5403A	Kit of 5 retention modules for Pro Series Soft Touch Connectorless Probes
E5404A	Probe, 34 channel, soft touch pro, single-ended, connects to 40-pin LA cable

Alte produse KEYSIGHT

MULTIMETRU CALIBRATOR DE PROCES AGILENT U1401B

• Dual display with bright LCD backlight
• 4-20 mA and 0-20 mA percentage scale readout
• 50,000 count true-RMS DMM
• Simultaneous signal source and measure

RLC-METRU RF 1 MHZ..3 GHZ AGILENT 4287A

• 1 MHz to 3 GHz, with 100 kHz steps
• 1% basic accuracy
• Wide impedance measurement range from 200 milliohm to 3 kohm

GENERATOR SEMNAL VECTORIAL 100 KHZ..3 GHZ/ 6 GHZ AGILENT N5182A MXG

• 100 kHz to 3 GHz or 6 GHz
• 0.01 Hz resolution
• >+23 dBm up to 3 GHz using a highly-reliable, fast-switching electronic attenuator
• 100 MHz internal I/Q baseband generator
• Up to 64 MSa playback memory and 800 MSa storage

ANALIZOR DE RETEA 100 KHZ..1.5 GHZ/ 3 GHZ AGILENT E5061B ENA

• 100 kHz to 1.5 GHz / 3 GHz
• 5 Hz to 3 GHz Optional
• Transmission / Reflection test set
• S-parameter test set

OSCILOSCOP USB 2 X 100 MHZ AGILENT U2701A

• 100 MHz bandwidth
• 2 channels
• 32 Mpts memory depth, 64 Mpts interleaved single-shot
• 1 GSa/s sample rate on 2 channels interleaved, 500 MSa/s each channel

MODUL MULTIFUNCTIONAL I/O AGILENT 34907A

• 16 bits of digital input and output
• 100 kHz totalizer input
• Two +/-12V analog outputs

MODUL SWITCH 32 CANALE AGILENT 34937A

• 28 Form C channels up to 1A, 50W
• 4 Form A channels up to 5A, 150W
• Latching armature relays, with relay counter

ANALIZOR LOGIC PORTABIL 136 CANALE AGILENT 16804A

• 136-channel portable logic analyzer
• 4 GHz (250 ps) timing zoom with 64 K memory
• 1.0 GHz / 500 MHz (half / full-channel) conventional timing with deep memory
• up to 450 MHz State clock rates
• up to 500 Mb/s Data rates
• up to 32 M acquisition memory depth

MULTIMETRU DIGITAL DE PRECIZIE 6.5 DIGIT AGILENT 34411A

• 6 ½ digit resolution
• Basic accuracy: .0030 % DC,0.06% AC
• 14 measurement functions including capacitance & temperature
• 50,000 readings/sec. @ 4 1/2 digits to the PC
• 1M reading memory

SURSA CURENT ALTERNATIV CU ANALIZA PUTERE 375VA AGILENT 6811B

• Power: 375 VA
• Voltage rms: 300 V
• Current rms: 3.25 A
• Repetitive & non-repetitive peak current: 40 A