8 input channels
Fully Class-A compliant: Conduct tests according to the stringent international IEC 61000-4-30 Class-A standard
Power quality statistics according to EN50160 and DISDIP tables like ITIC, CEBEMA, ANSI
records rms values together with corresponding minimum and maximum values for: Voltage Current Power P, Q, S Power Factor kWh Flicker Unbalance Frequency Harmonics Interharmonics
10 MHz, 6000 Vpk waveform capture: Get a detailed picture of even the shortest event
GPS time synchronization: Correlate data with events or datasets from other instruments with precision
Flexible and fully configurable thresholds and scale factors: Allows user to pinpoint specific issues by defining the detailed criteria for detection and recording of disturbances.
Uninterrupted power supply (40 minutes): Never miss important events - even record the beginning and end of interruptions and outages to help determine the cause
2 GB data memory: Enables detailed, simultaneous recording of numerous power parameters for long periods of time
Comprehensive software included: Provides trend diagrams for root cause analysis, statistical summaries, report writing and real-time data monitoring in the online mode
Plug and play: Allows quick setup with automatic sensor detection; sensors are instrument powered, eliminating the need for batteries
Rugged field design: Insulated housing and a solid state design with no rotating components enable reliable testing under nearly any conditions

Accesorii standard

Topas Power Quality Recorder with 8 input-channels (4 currents/4 voltages or 8 voltages)

Fluke 1760 Basic include:

Internal Flash-memory 2 GB
PQ Analyze software on CD-ROM
Ethernet cable for network connection (1)
Crosslink Ethernet cable for direct PC connection (1)
Mains cable (1)
Operational manuals
Carrying bag

Fluke 1760 also include:

Voltage probes, qty 4 (600 V for INTL set, 1000 V for US set)
Current probes, qty 4 (Dual-range flexible current probes 1000 A / 200 A AC)
GPS time sync receiver

Fluke 1760TR Basic include: same as Fluke 1760 Basic and also:

Fast transient analysis up to 10 MHz

Fluke 1760TR include: same as Fluke 1760 and also:

Fast transient analysis up to 10 MHz

Optiuni recomandate

Industrial Test Leads, Probes and Clips

TPS VOLTPROBE 100V	Voltage Probe
TPS VOLTPROBE 10V	Voltage Probe
TPS VOLTPROBE 1KV	Voltage Probe
TPS VOLTPROBE 400V	Voltage Probe
TPS VOLTPROBE 600V	Voltage Probe
TPS VOLTPROBE 750V	Voltage Probe

Current clamps

TPS CLAMP 10A/1A	Clip-on Current Transformer
TPS CLAMP 200A/20A	Clip-on Current Transformer
TPS CLAMP 50A/5A	Clip-on Current Transformer
TPS FLEX 18	Flexible Current Probe
TPS FLEX 24	Flexible Current Probe
TPS FLEX 36	Flexible Current Probe
TPS SHUNT 20MA	Shunt 20mA AC/DC
TPS SHUNT 5A	Shunt 5A AC/DC

Alte produse FLUKE

POMPA HIDRAULICA CALIBRARE PRESIUNI FLUKE 700HTP-2

• hand operated hydraulic pressure pump
• designed to generate calibration pressures up to 10,000 psi/690 bar
• Variable size stroke adjustment, allows the user to vary the volume and pressure per stroke
• Integral pressure adjustment vernier knob for fine pressure adjustment
• Directly connection to pressure modules consolidates two separate pieces into one when performing pressure calibration and testing
• Two ¼ inch NPT pressure ports, one for reference (pressure module or gauge), one for UUT
• Improved priming
• Improved stroke limiting mechanism

CALIBRATOR CURENT DE BUCLA CU PRECIZIE FLUKE 709

• Functions: mA source, mA simulate, mA read, mA read/loop power and volts read
• Best-in-class accuracy at 0.01% reading
• Small rugged design operates on (6) standard AAA batteries
• Intuitive user interface with Quick-Set knob for fast setup, easy use
• Built in selectable 250 ? resistor for HART communication

CALIBRATOR PORTABIL DE BUCLA FLUKE 707

• 0 to 28 V DC Voltage measure
• 0 to 24 mA Current measure
• 0 to 20 mA Current source / simulate
• mA accuracy of 0.015%

TESTER TENSIUNE SI CONTINUITATE FLUKE T90/ T110/ T130/ T150

• Voltage AC/DC 12V - 690V
• Continuity 0 - 400 k?
• Frequency 0 / 40 - 400 Hz
• Phase rotation
• Resistance measurement

ANALIZOR TRIFAZAT îNREGISTRARE ENERGIE FLUKE 1730

• Masuratori cheie: Tensiunea, curentul, puterea, factorul de putere si valorile associate
• Ecran tactil color, luminous
• Doua porturi USB
• Dimensiuni compacte
• Software pentru aplicatia de analizare a energiei

MODUL WIRELESS ACHIZITIE MASURA TENSIUNE FLUKE CNX V3000

• Masuratori de tensiune c.a. true-RMS la 1.000 V
• Precizie de ±1% la 500 Hz si de ±2% la 1 kHz
• Înregistrare în memorie a pâna la 65.000 de masuratori
• Afisaj LCD cu lumina de fundal
• CAT IV 600 V, CAT III 1.000 V; IP42

CALIBRATOR MULTIFUNCTIONAL DE PROCES FLUKE 725

• 0 to 100 mV, 0 to 30 V DC Voltage measure
• 0 to 100mV, 0 to 10 V DC Voltage source / simulate
• 0 to 24 mA Current measure / source / simulate
• 0 to 3200 O Resistance measure / source / simulate
• 1 to 10 kHz Frequency measure / source / simulate
• RTDs, thermocouples measure / source / simulate
• pressure measure

CALIBRATOR DE PRESIUNE FLUKE 718EX

• ATEX II 1G Ex ia IIC T4 Compliant
• Built-in pressure / vacuum hand pump
• Pressure measurement to 0.05%
• Pressure measurement to 200

MULTIMETRU DIGITAL PORTABIL CU DATA LOGGING 4.5 DIGIT FLUKE 287

• 4.5 digit large ¼ VGA display with white backlight
• 50,000 count
• 0.025% basic accuracy
• Logging function with TrendCapture

TESTER INSTALATII ELECTRICE 50V-1000V FLUKE 1654B

• Test voltage: 50V, 100V, 250V, 500V, 1000V
• Two measurements at once and a dual display
• PEFC/PSC and loop impedance
• Fast voltage measurement between L-N, L-PE and N-PE
• PASS/FAIL indication for RCD test results
• Earth resistance