Calibrator de presiune Fluke 721

Cod: Fluke 721 721-1601 721-1603 721-1605 721-1610 721-1630 721-1650 721-3601 721-3603 721-3605 721-3610 721-3615 721-3630 721-3650


 

Brosura produs PDF, 0.76 Mb
   

Descriere

Pressure Calibration and Temperature Measurement for Custody Transfer Applications

The ideal tool for gas custody transfer applications is the Fluke 721 Precision Pressure Calibrator. With dual isolated pressure sensors, it allows you to take simultaneous static and differential pressure measurements with a single tool.

 

The 721 can be configured by selecting either a 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar). 


  • Ideal for gas flow calibration (custody transfer) applications
  • Two isolated, stainless steel, pressure sensors with 0.025 % accuracy
  • Pt100 RTD input for temperature measurement, (probe optional)
  • Measures 4 to 20 mA signals
  • Internal 24 V loop power supply can power a transmitter under test
  • Measure up to 30 V dc, check 24 V loop power supplies
  • Extend pressure measurement range with connection to external 700 series pressure modules (29 ranges)
  • Large backlit graphic display can display up to three inputs simultaneously
  • Store five instrument setups for recall and use

 

 

Accesorii standard

Fluke-721-1601           Dual Sensor Pressure Calibrator, 16 PSIG, 100 PSIG

Fluke-721-1603           Dual Sensor Pressure Calibrator, 16 PSIG, 300 PSIG

Fluke-721-1605           Dual Sensor Pressure Calibrator, 16 PSIG, 500 PSIG

Fluke-721-1610           Dual Sensor Pressure Calibrator, 16 PSIG, 1000 PSIG

Fluke-721-1615           Dual Sensor Pressure Calibrator, 16 PSIG, 1500 PSIG

Fluke-721-1630           Dual Sensor Pressure Calibrator, 16 PSIG, 3000 PSIG

Fluke-721-1650           Dual Sensor Pressure Calibrator, 16 PSIG, 5000 PSIG

Fluke-721-3601           Dual Sensor Pressure Calibrator, 36 PSIG, 100 PSIG

Fluke-721-3603           Dual Sensor Pressure Calibrator, 36 PSIG, 300 PSIG

Fluke-721-3605           Dual Sensor Pressure Calibrator, 36 PSIG, 500 PSIG

Fluke-721-3610           Dual Sensor Pressure Calibrator, 36 PSIG, 1000 PSIG

Fluke-721-3615           Dual Sensor Pressure Calibrator, 36 PSIG, 1500 PSIG

Fluke-721-3630           Dual Sensor Pressure Calibrator, 36 PSIG, 3000 PSIG

Fluke-721-3650           Dual Sensor Pressure Calibrator, 36 PSIG, 5000 PSIG

Fluke-720RTD            RTD Probe for 721 and 719Pro

Fluke-720URTDA      Universal RTD adapter for Fluke-721 and 719Pro

 

                     Soft case

                     Four (4) AA batteries

                     Manual

                     Traceable calibration certificate

                     Test leads

 

 

Optiuni recomandate

Fluke-720RTD            RTD Probe for 721 and 719Pro

Fluke-720URTDA      Universal RTD adapter for Fluke-721 and 719Pro

 

Alte produse FLUKE

INREGISTRATOR MONITORIZARE PUTERE TRIFAZATA FLUKE 1735

• Record power and associated parameters for up to 45 days
• Measure harmonic distortion caused by electronic loads
• Voltage event capture
• View graphs and generate reports

 

CALIBRATOR UNIVERSAL FLUKE 9100

• Calibrates over 15 different categories of general-purpose test equipment
• Options for power meter, insulation/continuity tester and oscilloscope calibration
• Semi-automated and fully automated procedure modes
• Fully supported by MET/CAL Plus software
• Intuitive front panel operation for ease of use

 

CALIBRATOR MULTIFUNCTIONAL DE PROCES CU HART FLUKE 754

• Measure volts, mA, RTDs, thermocouples, frequency
• ohms to test sensors, transmitters and other instruments
• Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure
• Power transmitters during test using loop supply with simultaneous mA measurement
• HART Capabilities

 

MULTIMETRU DE PROCES FLUKE 787

• 0 to 1000 V DC/AC Voltage measure
• 0 to 1 A Current measure
• 0 to 20 mA, 4 to 24 mA Current source
• DMM and loop calibrator in one tool

 

CALIBRATOR MULTIFUNCTIONAL DE PROCES FLUKE 753

• Measure volts, mA, RTDs, thermocouples, frequency
• ohms to test sensors, transmitters and other instruments
• Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure
• Power transmitters during test using loop supply with simultaneous mA measurement

 

MEGOHMETRU DIGITAL MULTIMETRU IZOLATIE 50/ 1000V FLUKE 1507

• Insulation test range: 0.01 MO to 10 GO
• Insulation test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V

 

MULTIMETRU DE PROCES FLUKE 789

• 0 to 1000 V DC/AC Voltage measure
• 0 to 1 A Current measure
• 0 to 20 mA, 4 to 24 mA Current source
• DMM and loop calibrator in one tool
• HART mode setting with loop power

 

TERMOMETRU INFRAROSU FARA CONTACT FLUKE 62 MAX

• Dust and water-resistant: IP54 rated for dust and water resistance.
• Rugged: 3-meter (9.8-foot) drop tested.
• Ergonomically designed: Completely redesigned for a more natural hand fit.
• Large, backlit display: Large screen makes data easier to read, even in dark areas.
• Min/Max/Avg/Dif: Displays the minimum, maximum or average temperature, or the difference between two measurements.
• Alarm: Hi and Lo alarms for rapid display of measurements outside the limits

 

FLUKE TIX560 CAMERA DE TERMOVIZIUNE 320X240

• Fluke TiX500 320x240 pixels, -20 °C..+650 °C
• Fluke TiX520 320x240 pixels, -20 °C..+850 °C
• Fluke TiX560 320x240 pixels, -20 °C..+1200 °C

 

CLESTE AMPERMETRIC CURENT TRUE-RMS 400A FLUKE 323

• 400 A ac current measurement
• 600 V ac and dc voltage measurement
• True-rms ac voltage and current for accurate measurements on non-linear signals
• Resistance measurement up to 40 k? with continuity detection