ISOMET 2114 is a portable hand-held measuring instrument for direct measurement of heat transfer properties of a wide range of isotropic materials including cellular insulating materials, plastics, glasses and minerals. It is equipped with two optional types of measurement probes:

"� needle probes for soft materials

"� surface probes for hard materials

It applies a dynamic measurement method, which enables to reduces the measurement time in comparison with steady state measurement methods. Built-in menu system on color graphic display and the alphanumeric keypad enable effective interactive communication with the device. Measurement data are stored in the high capacity internal memory. Content of the memory is accessible through the display or it can be transferred into a PC by USB or RS-232 interface. Calibration data in internal memory ensure interchangeability of probes without affecting the measurement accuracy. Supplied software package enables updating of calibration coefficients after recalibration of measurement probes by means of reference materials. Device can be powered from mains or from internal rechargeable batteries at outdoor, in situ measurements.

Features

Measurement of Thermal Conductivity, Thermal Diffusivity, Volume Heat Capacity and Temperature
Lightweight compact size
Color graphic display and alphanumerical keypad
USB and RS-232 interface
High capacity internal memory for results
Transport case with high protection degree

Applications

Civil Engineering

"� Measurement of thermal transfer properties of building materials and constructions

"� Optimization of development of thermal insulating materials

Geological Investigations

"� Indoor and outdoor measurement of thermal transfer properties of soils, sands, etc.

"� Optimization of development of thermal insulating materials

Chemical Industry

"� Measurement of heat transfer properties of chemical substances, agents, lubricant greases, plastics, suspensions, foam, rubbers, etc.

Woodworking Industry

"� Measurement of heat transfer properties of woods

"� Moisture measurement and drying process optimization

Textile Industry

"� Optimization of textile thermal contact comfort

"� Textile composition and surface adjustment

"� Evaluation of floor plates and carpets

Accesorii standard

Standard Accessories
ISOMET 2114	Measuring Device
ISTC 2000	Transport Case
WSPA 2000	Power Adapter (100-240V)
CCU 1000	USB Communication Cable
ISCD	CD-ROM with Manual and Software

Optiuni recomandate

Optional Accessories
IPN 1100	Needle Probe with one meas. range
IPS 1100	Surface Probe with one meas. range
IPNR	Additional meas. range for IPN 1100
IPSR	Additional meas. range for IPS 1100
WSCA 1000	Car Outlet Adapter (12V)
CCS 1000	RS-232 Communication Cable
SOB	Set of Borers for Needle Probes

Alte produse FLUKE

Brand: Applied Precision

STAND COMPACT MASURA, TESTARE, CALIBRARE CONTOARE ELECTRICITATE APPLIED PRECISION ELMA 8X01

• Accuraty of the power and energy reference meter can be optimized for laboratory demand up to 0.01%
• Control of main and influencing quantities inclusive harmonics and predefined standard test patterns
• Intelligent high resolution
• Optical sensor with auto-calibration capability eliminating manual adjusment is not sensitive to external light conditions
• Optical sensor evaluates high constant meter with LED impulses up to 2.5 kHz
• Optical communitacion channel enables reading adjustment of registers

Brand: Applied Precision

SURSA TRIFAZATA SARCINA FANTOMA CU CONTOR ETALON INTEGRAT PT CALIBRARE CONTOARE ELECTRICE

• Multifunction portable signal source with integrated working standard of power and energy
• Model PTE 2100A : 1-phase, 0.05% Class Accuracy
• Model PTE 2100E : 1-phase, 0.02% Class Accuracy
• Model PTE 2300A :3-phase, 0.05% Class Accuracy
• Model PTE 2300E : 3-phase, 0.02% Class Accuracy
• Power Source per phase: Voltage 3..300V, Current 1mA..120A
• Reference Meter per phase : Voltage 30..300V, Current 1mA..120A

Brand: Applied Precision

SONDE DE CURENT AC FLEXIBILE ROGOWSKI APPLIED PRECISION SYMMPROFLEX

• Accuracy up to 0.2 % in amplitude and 0.1 ° in phase
• No additional error for wire position
• Symmetric flexible shielding pp for excellent suppression of strange electric fields
• Symmetric sensor coil pp for excellent suppression of strange magnetic fields
• Low noise, dual gain, high CMRR amplifier with precision integrator pp
• Two sensor cable versions: high voltage Ø 12.6 mm and super flexible Ø 6 mm

Brand: Applied Precision

STANDARD REFERINTA FAZA ZERO APPLIED PRECISION ZPS 1101

• Broad-band operation up to 100th harmonic of mains frequency
• Optional scalable current up to 240 A (720 A)
• nominally zero phase angle between the current flowing through the resistor and the respective voltage on its voltage terminals

Brand: Applied Precision

CONTOR ETALON DE PRECIZIE CLASA 0.1 APPLIED PRECISION XX20

• Class 0.1
• Precision 24-bit A/D conversion and digital signal processing
• Continuous voltage and current ranges with auto-range functionality
• Direct meter testing possibility (with supplied accessories)
• Rack mountable with 2U form factor
• Current measurement up to 120 A
• Programmable meter constant

Brand: Applied Precision

STANDARD REFERINTA CLASA 0.05 0.02 0.01 CALIBRARE CONTOARE ELECTRICE APPLIED PRECISION RS 2X30

• Single-phase and three-phase versions in classes 0.05, 0.02, 0.01
• Current measurement up to 120, 160, 200 A or with optional Current Extender up to 240 A
• Continuous voltage and current ranges with auto-range functionality
• Independent input channels (three fully independent differential voltage input circuits in three-phase version)
• Four independent fully programmable impulse outputs assignable to various quantities or constant frequency
• Direct meter testing possibility (with supplied accessories)
• Portable with special transport case

Brand: Applied Precision

UNITATE EVALUARE LOCALA EROARE CONTOARE ELECTRICITATE TESTATE APPLIED PRECISION OPS

• Remotely configurable either for reflexive mark or SO output of electromechanical or LED of electronic meters
• Supplied with enhanced optical scanner working with coded signal which suppresses false light signals
• Auto-calibration capability significantly increases the work comfort and productivity of the test system
• Remotely controlled internal dividers enable evaluation of high constant meters with light impulses up to 1 kHz

Brand: Applied Precision

TRANSFORMATOR CURENT REJECTOR MOD COMUN TESTARE CONTOARE ELECTRICITATE APPLIED PRECISION CMRI

• Standalone through-hole precision electronically compensated transformer with single
• wire capability
• Excellent accuracy and dynamics
• Remote control via serial communication
• Monitoring of individual contact resistance and power loss
• Protection against open circuit and overload

Brand: Applied Precision

CONTOR ETALON PORTABIL ELECTRICITATE APPLIED PRECISION WS

• Lightweight compact size
• Single-phase and three-phase versions, accuracy classes 0.2, 0.1, 0.05
• USB, RS-232 and optical interface
• Vector diagram and signal shape display (oscilloscope mode)
• Harmonics analysis in tabular and graphical format
• Two universal input channels for any combination of Voltage and Current probes for Power or CT / VT ratio
• Optional wireless communication interface and wireless scanning head
• Optional portable printer

Brand: Applied Precision

STAND AUTOMATIZAT MASURA, TESTARE, CALIBRARE CONTOARE ELECTRICITATE APPLIED PRECISION ELMA

• The accuracy of the power and energy reference meter is available up to 0.01 %. The reference meter measures all main and influencing quantities inclusive harmonic analysis and distortion of the test signals.
• The available power and the maximum current of 240 A of extremely pure synthesized 4-quadrant test signal covers the needs of both precision and high capacity testing laboratories. The test signal can be created with user defined harmonic content.