Extech MO55 Tester umiditate umidometru

Cod: Extech MO55


 

Brosura produs PDF, 0.26 Mb

Descriere

Quick Moisture Measurements on Wood and Building Materials

Take quick Moisture measurements on wood and building materials with choice of pin or pinless (non-invasive) method. Easy-to-operate with display icons that indicate the levels of moisture content plus audible alert feature. Ideal for building restoration projects and applications where moisture detection on floors, tiles and under carpets is critical. A must-have tool for analyzing the after-effects of water leakage behind walls and in ceilings.

 

Features:

  • Displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete, and mortar
  • Pinless moisture measurement depth to <1" (25mm)
  • Audible Alert - Tone rate beeps faster as the moisture level increases
  • Icons display low, medium and high levels of moisture content
  • Easy-to-use, compact-sized design
  • Data Hold freezes reading on display
  • Built-in battery level check and measurement verification test
  • Auto Power Off conserves battery power
  • Complete with pins (2), protective cap, and 9V battery
 

Alte produse EXTECH

EXTECH MG320 MEGOHMMETRU CAT IV TESTER IZOLATIE/TRUE RMS

• Measure Insulation Resistance to 20GO
• 5 Test Voltage ranges
• Polarization Index (PI) and Dielectric Absorption Ratio measurements (DAR)
• Low Resistance measurement with Zero function
• Programmable Timer feature sets the duration of test

 

EXTECH MN30 MULTIMETRU TRUE RMS AUTOSENSING™ + NCV

• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Unique smart AutoSensing feature
• Built-in Non-Contact Voltage (NCV) detector
• Convenient built-in LED Flashlight
• Audible Continuity tester

 

EXTECH MO220 UMIDIMETRU UMIDITATE LEMN

• Monitor moisture in wood and other building materials
• Measure directly with the built-in moisture pins or use remote hand-press probe on hard surfaces
• Memory contains 8 wood groups with calibrations for approximately 170 species of wood
• Designed in a rugged double molded housing construction and is pocket sized for one-handed operation

 

EXTECH EX430 MULTIMETRU PROFESIONAL CU 1 FUNCTII

• True RMS DMM with 11 functions and 0.3% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Diode/Continuity, Duty Cycle
• Input fuse protection and mis-connection warning
• 20A max Current

 

EXTECH 382100 ANALIZOR PUTERE 3 FAZE 1200A SI DATALOGGER

• Single phase, 3-phase/3-wire or 3-phase/4-wire systems
• Large backlighting LCD displays 35 parameters simultaneously (MW, kVAR, MVA, PF plus the voltage and current of the 3 phases)
• Displays Active Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Power Factor
• Current measurements to 1200A and Voltage measurements to 600V

 

EXTECH 380820 SURSA UNIVERSALA AC SI ANALIZOR PUTERE

• 99 memory locations for preset voltage and frequency output settings
• User-programmable Over Current Protection
• Programmable through the built-in RS-232 interface
• Data acquisition mode captures readings to your PC with a user-programmable sampling rate of 2 to 65,535 seconds
• Complete with AC power cord, RS-232 to USB cable and software

 

EXTECH CB20: CIRCUIT BREAKER FINDER/RECEPTACLE TESTER

• Quickly locate Circuit Breakers and Fuses
• Receptacle Tester (Transmitter): Test GFCI circuits, LED indication of 2 test conditions and 6 wiring faults, Test Reversed/Open Connections
• Complete with Receiver, Transmitter and 9V battery
• Microprocessor-based automatic sensitivity adjustment, Audible and visual indication, low battery indicator, Ergonomic design

 

EXTECH 382203 SURSA ANALOGICA TRIPLA

• Adjustable Voltage and Current output
• Easy snap terminals for fixed 5V/0.5A and 12V/1A outputs
• Constant Voltage or Current
• Current limiting indicator
• Overload and short circuit protection
• Binding post terminals for variable supply

 

EXTECH DT500 TELEMETRU LASER DISTANTA 70M CU BLUETOOTH

• Integrated Bluetooth® connects with iOS devices to transmit readings for remote viewing
• Works with free Apple app to display large easy-to-read values up to 30ft (10m) away
• Measures up to 229ft (70m) with a target plate
• Automatically calculates Area and Volume
• Indirect measurement using Pythagorean Theorem
• Continuous measurement function with Min/Max distance tracking updates every 5 seconds


EXTECH CO100 TESTER CALITATE AER DE BIROU CO2

• Checks for Carbon Dioxide (CO2) concentrations
• Maintenance free NDIR (non-dispersive infrared) CO2 sensor
• Indoor Air Quality displayed in ppm with Good (0 to 800ppm), Normal (800 to 1200ppm), Poor (>1200ppm) indication
• User programmable Visible and Audible CO2 warning alarm