The compact Extech MA250 200 amp AC/DC clamp meter offers maintenance technicians, electricians, and DIYers a test instrument that delivers a high level of features and value. In addition to a host of core multimeter and current measurement capabilities, it also features a built-in non-contact voltage (NCV) detector. The heart of the MA250 is a full-function digital multimeter. Measurement functions cover most types of troubleshooting over and above noninvasive current probe measurements: voltage, resistance, capacitance, frequency, duty cycle, diode and continuity tests. Even measure temperature with the supplied Type K bead wire temperature probe. MA250 comes with test leads, general-purpose Type K bead wire temperature probe, two AAA batteries, carrying case, user manual, and one-year limited warranty.

� Built-in non-contact Voltage detector with LED alert to quickly check for the presence of live wires before testing

� 1.2" (30mm) jaw size for conductors up to 500MCM

� 4,000 count LCD display

� Multimeter functions include AC/DC Voltage, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode, and Continuity

� Relative Mode for Capacitance Zero and Offset Adjustment

� Data Hold and Auto Power Off

� Complete with test leads, general purpose Type K bead wire temperature probe, two AAA batteries, and carrying case

Alte produse EXTECH

EXTECH CT70 TESTER GFCI SI ANALIZOR CIRCUIT AC

• Selectable loads of 12, 15 and 20 Amps
• Measures loaded and unloaded AC Line Voltage
• Calculates and displays % Voltage Drop and Line Impedance
• Displays Peak Line Voltage and Frequency

EXTECH 407736 SONOMETRU CU 2 SCALE

• Provides 1.5dB accuracy
• Meets ANSI and IEC 651 Type 2 standards
• Two measuring ranges: 35 to 90dB (Low) and 75 to 130dB (High)
• Max Hold with reset button
• Built-in calibration check (94dB)

EXTECH 382100 ANALIZOR PUTERE 3 FAZE 1200A SI DATALOGGER

• Single phase, 3-phase/3-wire or 3-phase/4-wire systems
• Large backlighting LCD displays 35 parameters simultaneously (MW, kVAR, MVA, PF plus the voltage and current of the 3 phases)
• Displays Active Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Power Factor
• Current measurements to 1200A and Voltage measurements to 600V

EXTECH PRC30: MULTIFUNCTION PROCESS CALIBRATOR

• 0 to 24mA (-25 to 125%) readout
• 24V DC power source for 2-wire current loop
• 0 to 20V DC calibration source
• Source and measure 8 thermocouple type devices (J, K, T, E, C, R, S and N)
• CJC - Cold Junction Compensation function
• Up to five user adjustable calibration presets
• Palm-sized double molded housing and large dot-matrix backlit LCD

EXTECH LT10 LUXMETRU DE BUZUNAR

• Measures light intensity up to 4000Fc/40000Lux with measuring rate of 1.5 times/second
• Pocket-sized housing with easy one-button operation
• Large, backlit LCD display
• Double-molded side grip
• Tripod mount (tripod not included)
• Complete with 9V battery

EXTECH MP530A MULTIPRO® MULTIMETRU PERFORMANT

• High basic DC Voltage accuracy of 0.08%
• Wide AC Voltage bandwidth of 40Hz to 20kHz
• Rugged design with protective holster and water resistant housing
• Backlit 5000 count LCD display for high resolution (0.01mV, 0.1µA, 0.01Ohm, 0.01nF, 0.001Hz)

EXTECH CT20 TESTER CONTINUITATE

• A bright flashing LED and loud pulsating beeper indicate local continuity
• Remote continuity with the use of the remote probe
• Flashing remote probe - two lead, bi-color (red/green) LED probe allows a single user to identify up to three wires or cables at a time
• Lightweight and pocketsized, clips on and hangs from the cable(s) under test without falling off
• Great for Electricians and Helpers, Cable TV and Audio System Installers, Alarm Technicians, Plumbers, HVAC Installers etc.

EXTECH UM200 MICRO-OHMMETRU 10A INALTA REZOLUTIE

• 6 ranges with 3 sub-ranges in each current range
• Measurement of resistive and inductive materials
• 5-Digit backlit LCD, PC interface
• Auto or Manual ranging, 10A maximum test current
• Store/Recall up to 3000 measurements

EXTECH LRK15 KIT INSTALATII LUMINA SI AUDIT ENERGETIC

• Designed for professionals who routinely audit existing and replacement lighting systems for energy efficiency and lighting performance
• Kit includes:
• LT300 - Light meter with digital and analog display of light in Foot-candles or Lux
• DT200 - Compact laser distance meter with area/volume calculation functions
• 380940 - 400A True RMS AC/DC power clamp meter
• Supplied in a soft carrying case that provides protection and organization for the meters whenever they are needed

EXTECH LT300 LUXMETRU

• Wide range to 40,000Fc or 400,000 Lux with max resolution to 0.01 Fc/Lux
• Relative mode indicates change in light levels, peak mode captures highest reading
• Remote light sensor on 12" (30.5cm) coiled cable - expandable to 24" (61cm)
• Utilizes precision photo diode and color correction filter
• Large LCD display with analog bargraph
• Backlight for readings in low light levels
• Complete with 9V battery, light sensor with protective cover, protective holster, and soft case