Ruggedly designed and waterproof to IP67 standards, the EX530 is ideal for use in the outdoors, on boats, and in any harsh industrial environment. It has a double molded housing and is drop-proof up to six feet with a safety rating of CAT IV 600 Volt and CAT III 1000 Volt. It measures AC/DC voltage and current, resistance, capacitance, electronic and electrical frequency, temperature, 4 to 20 mA, and duty cycle. Additional features include: 0.06% basic accuracy, continuity beeper, diode test (2.8 Volt open circuit voltage), 40000 count resolutions, backlit LCD with barograph, peak hold, min/max, relative mode, data hold and 1000 Volt input protection for all functions. Comes complete with double-molded test leads, type K bead wire temperature probe (-4 to 482 degrees F/-20 to 250 degrees C), magnetic hanging strap, case, and a 9v battery.

Features:

True RMS DMM with 11 functions and 0.06% basic accuracy
AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
Dual sensitivity frequency functions (electrical/electronic)
1000V input protection on all functions
20A max Current
MIN/MAX, Data hold, Relative, Auto power off
40,000 count large backlit LCD with bargraph
Double molded housing for waterproof protection
Complete with double molded test leads, magnetic hanging strap, Type K bead wire temp probe, carrying case and 9V battery

Alte produse EXTECH

EXTECH EX410A MULTIMETRU PROFESIONAL CU 8 FUNCTII

• Averaging DMM with 8 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Temperature, Diode/Continuity
• Input fuse protection and mis-connection warning
• 10A max Current

EXTECH RT30: WIRELESS AC CIRCUIT IDENTIFIER (914MHZ) WITH EXTERNAL PROBE

• Combines non-contact voltage and light detection with RF (Radio Frequency) transmission technology
• Remotely identifies mid-run AC wiring, circuit breakers, switched lines, AC outlets, and light fixtures
• Non-contact mid-run AC wiring identification without cutting into wires
• Lighting circuit identification using built-in light sensor

EXTECH TG20 TRASATOR FIRE SI CABLURI CU GENERATOR SI RECEPTOR

• Transmitter with output cables terminated in modular RJ11 phone connector
• Transmitter injects traceable signal into cables, checks telephone lines, and performs continuity checks
• Non-Contact probe audibly identifies selected wire or cable
• Easily trace wires from source to termination
• Test for properly operating phone lines

EXTECH SD500 DATALOGGER INREGISTRARE DATE UMIDITATE SI TEMEPRATURA

• Dual LCD simultaneously displays Relative Humidity and Temperature readings
• Datalogger stores readings on an SD card in Excel® format for easy transfer to a PC
• Selectable data sampling rate: 5, 10, 30, 60, 120, 300, 600 seconds or Auto
• Complete with six AAA batteries, SD memory card, universal AC Adaptor, and mounting bracket

EXTECH 380460 PRECISION MILLIOHM METER (110V)

• High accuracy and performance for low resistance measurements
• Large 0.7" (18mm) LCD 1999 count
• 4-wire cables with Kelvin clip connectors
• Manual zero display adjust
• Overrange indication
• Compact, durable field service housing with protective cover

EXTECH DT100M TELEMETRU LASER

• 2" to 330ft (0.05 to 100m) measurement range
• Automatically calculates Area and Volume
• Indirect measurement using Pythagorean theorem
• Continous mode with min/max function
• Displays Sum (+) / Difference (-) of multiple readings
• Front or rear edge reference

EXTECH ET10 TESTER RECEPTACOL GFCI

• Works with GFCI circuits
• Tests for faulty wiring in 3-wire receptacles: Correct, Open Ground, Open Neutral, Open Hot, Hot/Ground Reverse, Hot/Neutral Reverse
• Lights indicate circuit condition
• Standard North American 3-prong plug

EXTECH EMF300 TESTER SCAPARI MICORUNDE

• Ideal for measuring high frequency radiation levels emitted from household and commercial microwave ovens
• 0 to 1.999mW/cm² measurement range
• Audible alarm and overrange indicator
• Peak Hold
• Complete with 9V battery

EXTECH MO265 TESTER UMIDITATE LEMN METODELE CU SI FARA INTEPARE

• Choice of measuring moisture in wood and other building materials with pinless technology or use traditional remote pin probe (included)
• %WME (wood moisture equivalent) pin moisture reading
• Relative pinless moisture reading for non-invasive measurement
• Digital LCD readout with backlighting feature and tri-color LED bargraph
• Quickly indicates the moisture content of materials
• Pinless measurement depth to 0.75" (22mm) below the surface

EXTECH CT40 TESTER CU IDENTIFICATOR DE CABLU

• Troubleshoot electrical/electronic circuits and identify up to 16 local or installed lines
• MultiMeter functions include: AC/DC Voltage and Current, Resistance, Diode, and Continuity
• Transmitter/Receiver enables one person to remotely identify up to 16 wires
• Wire voltage check from 5 to 16VDC
• Data Hold and Max Hold, Auto power off