Extech ET38 Tester tensiune si Continuatate

• Heat Stress Index measures how hot it feels when humidity is combined with temperature, air movement, and radiant heat
• Black Globe Temperature (TG) monitors the effects of direct solarradiation on an exposed surface
• In/Out Function displays the WBGT value with or without direct sun exposure

 

• Large easy to read analog display
• Three test voltages 250V, 500V, and 1000V
• Insulation Resistance to 400MOhm
• Lock Power On feature for extended test times

 

• Large 2000 count LCD display
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Relative zero, Data Hold, Range Hold and Auto power off
• 10A fuse protection
• Overload protection and indication
• Includes protective holster with stand, general purpose Type K bead wire temperature probe, 2 AAA batteries and test leads

 

• Mobile phone base station antenna radiation
• RF power measurement for transmitters
• Wireless LAN (Wi-Fi) detection/installation
• Wireless communication applications (CW TDMA GSM DECT)
• Microwave leakage

 

• 250V, 500V and 1000V Test Voltages
• Measure Insulation Resistance to 10GOhm
• Large LCD display with analog bargraph
• Lo Ohm function for testing connections

 

• Total Step mode displays the total accumulated steps user walked after 7-day storage
• Auto power saving mode when meter detects no movement for 10 minutes
• Includes case with built-in clip to wear on your clothes and designed with lanyard insert hole (lanyard not included) to wear around your neck
• Complete with CR2032 battery and nylon case with window opening for display viewing and belt-clip

 

•

 

• Non-invasive measurement to monitor moisture in wood and other building materials
• Select from 10 wood types and measurement ranges
• Measurement depth to 0.75" (20mm) below the surface
• LCD displays % moisture of wood or material being tested

 

• Ideal for EMF measurements of mobile/cell phones, base stations and microwave leakage
• Measurement optimized for 900MHz, 1800MHz and 2.7GHz
• Non-directional (isotropic) measurement with three-channel (triaxial) measurement probe
• Max Hold and Average functions

 

• Dual LCD simultaneously displays Carbon Monoxide (CO) level and maximum CO reading taken from when the meter was powered on
• Long life electrochemical sensor
• Adjustable CO warning level at 25, 30, 35, 45, 50, 70, 100 and 200ppm (alarm is preset to 25ppm)
• Audible alarm when CO level reaches the warning set point level
• Choose from 3 calibration points: 0 (preset), 100, and 500ppm