401025 is a Foot Candle/Lux Meter which measures light level to 5000FC (foot-candles) and 50,000 Lux with a 5% accuracy using a precision photo diode and color correction filter. Meter features fast/slow response time and an analog output (1mV per count) for capturing readings to a recorder. Comes complete with 9-Volt battery.

� Accurately displays light level in terms of Fc or Lux over three ranges

� Select fast (1 second) or slow (2 seconds) response time

� Analog output of 1mV per count for capturing readings to a recorder

Alte produse EXTECH

EXTECH MN30 MULTIMETRU TRUE RMS AUTOSENSING™ + NCV

• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Unique smart AutoSensing feature
• Built-in Non-Contact Voltage (NCV) detector
• Convenient built-in LED Flashlight
• Audible Continuity tester

EXTECH SDL400 LUXMETRU CU INREGISTRARE DATALOGGING

• Wide range to 10,000Fc or 100kLux
• Cosine and color-corrected measurements
• Utilizes precision silicon photo diode and spectral response filter
• Offset adjustment used for zero function to make relative measurements
• Adjustable data sampling rate

EXTECH EX540 MULTIMETRU DIGITAL PORTABIL INDUSTRIAL CU WIRELESS SI DATALOGGER

• True RMS measurements for accurate AC Voltage and Current measurements
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency (electrical/electronic), Temperature, Duty Cycle, Diode/Continuity
• Double molded for waterproof (IP67) protection, CAT IV-600V safety rating for industrial applications
• Data Acquisition Mode for real time data transmission directly to your PC
• 1000V input protection on all functions

EXTECH PRC30: MULTIFUNCTION PROCESS CALIBRATOR

• 0 to 24mA (-25 to 125%) readout
• 24V DC power source for 2-wire current loop
• 0 to 20V DC calibration source
• Source and measure 8 thermocouple type devices (J, K, T, E, C, R, S and N)
• CJC - Cold Junction Compensation function
• Up to five user adjustable calibration presets
• Palm-sized double molded housing and large dot-matrix backlit LCD

EXTECH EX503 MULTIMETRU INDISTRIAL ROBUS SOLID CU 10 FUNCTII

• Averaging DMM with 10 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Duty Cycle, Diode/Continuity
• Dual sensitivity frequency functions (electrical/electronic)
• 1000V input protection on all functions
• 10A max Current

EXTECH 382203 SURSA ANALOGICA TRIPLA

• Adjustable Voltage and Current output
• Easy snap terminals for fixed 5V/0.5A and 12V/1A outputs
• Constant Voltage or Current
• Current limiting indicator
• Overload and short circuit protection
• Binding post terminals for variable supply

CAMERA VIDEO WIRELESS INSPECTII EXTECH BR200

• BR200: Video Borescope/Wireless Inspection Camera
• 17mm camera diameter and 3.5" Color TFT LCD Wireless Monitor
• Memory card for capturing images (JPEG) or video (AVI) for viewing on your PC
• Detachable wireless 3.5" color TFT LCD display
• Captured videos and images can be viewed on the wireless monitor or transferred to your PC via the microSD card or USB cable

EXTECH RHT35 DATALOGGER USB UMIDITATE TEMPERATURA PRESIUNE BAROMETRICA

• Compact size housing with built-in NTC thermistor, capacitive humidity sensor, and barometric pressure MEMS sensor designed with standard USB connector for easy data downloading to a PC
• 5-digit LCD display with battery life indicator
• User programmable settings: 6 languages, sample rate, start delay time, alarm delay time, high/low alarm range, and security feature
• Status Indication via Red and Green LEDs
• Start button begins continuous datalogging, which continues until memory is full at 48,000 readings (16K for each parameter), or when Stop button is pressed
• Bookmark 8 locations in a data recording log with a press of the Mark button

EXTECH EN150 TESTER MEDIU 11-IN-1 CU MASURA UV

• Built-in sensors measure Air Velocity, Air Flow, Temperature, Humidity, Wet Bulb, Dew Point, Heat Index, Wind Chill, Barometric Pressure, Altitude, and UV Light
• Field replaceable low friction vane wheel improves air velocity accuracy
• Backlit LCD display (auto off after 5 seconds)
• Data Hold, Auto Power Off
• Complete with built-in multiparameter sensors, wrist strap, and CR2032 battery

EXTECH PRC10: CURRENT CALIBRATOR/METER

• Sursa de semnal: iesire in curent 0-24mA (max 1000ohm)
• Masurare semnal: 0 -50mA
• Sursa de alimentare: 24Vcc pentru alimentare in bucla de curent
• Precizie: 0.01% ±1 digit
• Temperatura operare: 5�C...40�C