AC/DC current measurements with current ranges up to 300A
24mm in diameter of measurable conductor
Light weight & compact design
Mean value display
Sleep function
Approved for comformity to safety standards EN61010-1, EN61010-2-032 (CAT. III 300 V)

Description	AC/DC Mini Clamp-on
Method of detection	Mean Value
Display	LCD (Digital display: 3999 counts)
DC Current Range	40/300A
DC Current Resolution	0.01A
Response Time	Approx. 2 second
Range Switching	Auto-range
Data hold	On all range
Operating temperature and humidity	0 - 40°C, 90% RH or less (no condensation)
Influence of external magnetic field	1A or less at 400 A/m
Influence of conductor position	±(2% rdg + 5dgt) or less
Safety Standard	Conforms EN61010-1, EN61010-2-031, EN61010-2-032
Circuit voltage	300 Vrms or less
Withstanding voltage	3.7 kV AC for one minute
Power Supply	LR-44 x 2 (3V) SR-44 x 2
Battery Life	Approx. 11 hours (continuous)
Consumed current	Approx. 9 mA
Sleep Function	Automatically powered down in about 5 minutes after the last switch operation
Diameter of measurable conductor	24 mm at maximum
Dimensions	Approx. 59 (W) x 147 (H) x 25 (D) mm
Weight	Approx. 100 g
Accessories	Batteries, carrying case (93033) User's manual (IM CL235)

More products YOKOGAWA

YOKOGAWA EARTH TESTER EY200 (DIGITAL)

• 2P Test leads (for simplified measurement) has a structure that both the safety alligator clip and the test probe are available
• Warns when earth resistance of auxiliary earth spikes exceeds the permissible limit
• Convenient carrying soft bag for accessories etc.
• 3-Pole Earth Resistance Measurement (Precise Measurement)

YOKOGAWA DIGITAL MULTIMETER TY530

• Basic accuracy 0.09%
• True RMS measurement
• Ensured Field Site Safety
• Conforms to safety standards EN61010-1, 1000V CAT III, 600V CAT IV

YOKOGAWA - MINI CLAMP-ON TESTER CL120 (200A)

• Exclusive model for AC current measurement with current ranges up to 200A
• 24mm in diameter of measurable conductor
• Light weight & compact design
• Mean value display

YOKOGAWA - AQ6376 THREE MICRON OPTICAL SPECTRUM ANALYZER

• Long wavelength range: 1500 to 3400 nm
• Gas purging ports to reduce water vapor effects
• Built-In cut filter for high order diffracted light
• Double Speed Mode to further enhance fast measurement speed

YOKOGAWA DIGITAL MULTIMETER TY710

• Conforms to safety standards EN61010-1 1000V CAT., 600V CAT.
• Safety shutters for preventing erroneous insertion of test leads into current measurement terminals
• Operating temperature range -20 to +55C
• Storage temperature range -40 to +70
• Closed Case Calibration

YOKOGAWA MULTIFUNCTION CALIBRATOR CA71 CA51

• Autostep function
• Changes the output value in step form based on the setting from the divided output (n/m) function. Changes can be sourced automatically every 10% or 25%.
• Online communication (CA71 only) RS-232C-compliant optically isolated interface
• Sweep function
• Linearly increases or decrease the output. The increasing/decreasing time can be set to either 16 or 32 seconds.
• Memory function
• Source values and measurements forming individual value sets can be saved to or read from the Handy Calibrator's internal memory (maximum 50 value sets).
• Temperature monitor function

YOKOGAWA - DLM4000 MIXED SIGNAL OSCILLOSCOPES

• DLM4038 350MHz
• DLM4058 500MHz
• (Standard) 8 analog channels or 7 analog channels + 8 bit logic
• (/L16 option) 8 analog channels + 16 bit logic or 7 analog channels + 24 bit logic
• Motor control & inverter circuit development
• Reliable triggering
• Best in Class Deep Memory & Architecture
• Two fully independent zoom windows

YOKOGAWA AQ1200 COMPACT OPTICAL TIME DOMAIN REFLECTOMETER

• Applicable for installation and maintenance
• Models with a wavelength dedicated for maintenance of live fibers.
• These tri-wavelength models has two ports.

YOKOGAWA AQ6150 SERIES OPTICAL WAVELENGTH METER

• High wavelength accuracy of ±0.3pm
• Cope with modulated light and optical filter measurement
• Simultaneous measurement of up to 1024 wavelengths
• Increase throughput with high speed measurement

YOKOGAWA AQ1300 SERIES 1G/10G ETHERNET MULTI FIELD TESTER

• Optical and electrical measurement ports for 10M to 1G (AQ1301) and 10M to 10G (AQ1300) are available
• Built-in Optical power meter (factory-installed option for the AQ1300)
• Equipped with a variety of test functions to evaluate Ethernet performance, such as a throughput test, latency measurement, bit error rate test, and PING test.