AC current measurement with current ranges up to 2000A
AC/DC voltage and resistance measurements
True RMS display
54mm in diameter of measurable conductor
DC output function
Data hold function
Sleep function
Approved for conformity to safety standards EN61010-1, EN61010-2-031, EN61010-2-032 (CAT. HI 600 V, CAT. II1000 V)

Display (LCD, Digital Counts)	3999
AC Current Accuracy (400A Reference)	1.0+3(50/60Hz) 2.0+3(40~1kHz)
AC Current Accuracy (2000A Reference, 0~1500A)	2.0+3(50/60Hz) 3.0+3(40~1kHz)
AC Voltage Accuracy (40/400V/750V Reference)	1.0+2(50/60Hz) 1.5+3(40~1kHz)
DC Voltage Accuracy (40/400V/1000V Reference)	1.0+2
Resistance Accuracy (400/4k/40k/400kO reference)	1.5+2, Beeps at below 50± 35O (continuity check)
DC Output Accuracy (400A, 0~400mV Reference)	?.5% rdg ± 0.5mV (50/60Hz) ?.5% rdg ± 0.5mV (40~1kHz)
Method of detection	True RMS
Response Time	Approx. 2 seconds
Range Switching	Manual-range (on AC current range) / Auto-range (on AC voltage range, resistance range)
Data hold	On all range
Operating temperature and humidity	0-40°C, 85% RH or less (no condensation)
Influence of external magnetic field	1A or less at 400A/m
Influence of conductor position	± (2.0% rdg + 3dgt) or less
Safety Standard	Conforms EN 61010-1, EN61010-2-031, EN61010-2-032
Circuit voltage	1000Vrms or less
Withstanding voltage	5.55kV AC for one minute
Power Supply	R6P(SUM-3)x2 or LR6x2
Battery Life¹	150 hours
Consumed current	Approx. 5mA
Sleep Function	Automatically powered down in about 10 minutes after the last switch operation
Diameter of measurable conductor	54mm at maximum
Dimensions	Approx. 105(W)x247(H)x49(D)mm
Weight (Approx.)	470g
Accessories	Clamp Adapter (Model 99025), Output Cable for Terminal Screw (Model 91019), Carrying Case (Model 93034), Output Plug (Model 98012), Test Lead (Model 98011) User's manual (IM CL120), batteries
Order Notes	Each item selected MUST be ordered as a separate line item.
Product Notes	All Clamp-on Meters include Test Leads (where applicable) and a carrying case.

More products YOKOGAWA

YOKOGAWA - DL850E DL850EV SCOPECORDER

• Voltage & Currents
• Sensor Outputs
• Temperature, Vibration/Acceleration, Strain, Frequency
• Logic Signals & CAN / LIN and SENT

YOKOGAWA FG400 ISOLATED ARBITRARY/FUNCTION GENERATOR

• Frequency range: Sine wave 0.01 µHz to 30 MHz
• Amplitude resolution: 16 bits
• Sampling rate: 120 MS/s
• Output: 0 to 20 Volts, peak-to-peak

YOKOGAWA CLAMP-ON TESTER CL130 (ACA, ACV, 600A)

• AC current measurement with current ranges up to 600A
• AC voltage and resistance measurements
• 30mm in diameter of measurable conductor
• Mean value display
• Data hold function

YOKOGAWA AQ1000 ENTRY LEVEL OPTICAL TIME DOMAIN REFLECTOMETER

• Wavelengths: 1310 / 1550 nm
• Dynamic ranges: 32 / 30 dB
• Size: 185 mm (W) � 116 mm (H) � 56 mm (D) ( 7.3" (W) � 4.6" (H) � 2.2" (D) )
• Weight: 660 g ( 1.46 Lbs )

YOKOGAWA AQ6373B VISIBLE WAVELENGTH OPTICAL SPECTRUM ANALYZER 350 - 1200 NM

• Max safe input power: +20 dBm
• Level sensitivity: -80 dBm
• Dynamic range: ?60dB
• Single-mode, Multimode, and Large-core fibers
• Built-in optical alignment source

YOKOGAWA CLAMP-ON TESTER CL220 (AC/DC 300A)

• AC/DC current measurements with current ranges up to 300A
• 24mm in diameter of measurable conductor
• Light weight & compact design
• Mean value display
• Sleep function

YOKOGAWA DIGITAL RESISTANCE METER 7556

• Wide operating rangeability (1 Ohm range to 100 M Ohm range)
• Full remote controlability via the standard RS232C serial, or optional GP-IB interfaces
• Software based calibration
• Printer output of measurement, and statistical analysis results

YOKOGAWA - WT3000E PRECISION POWER ANALYZER

• Basic power accuracy: 0.01% of reading
• Both 2 A and 30 A input elements can be installed in a single unit
• Good readability: 8.4-inch LCD and the range indicator LEDs
• Simultaneous measurement with 2 units (Up to 8 power input elements)
• Store function: 50 ms data storing interval

YOKOGAWA CLAMP-ON PROCESS METER CL420 (DC MA CURRENT)

• 0.2% Accuracy, 0.01mA Resolution
• Dual Display
• LED Torch Light, Backlight Display
• Analog Output Available

YOKOGAWA - MINI CLAMP-ON TESTER CL120 (200A)

• Exclusive model for AC current measurement with current ranges up to 200A
• 24mm in diameter of measurable conductor
• Light weight & compact design
• Mean value display