The HV Tester 25 kV is a high-voltage generator with an infinitely variable negative DC output voltage of 0 - 25 kV. The condition of the test object with regard to electrical strength and insulation quality can be determined on the basis of the unit's readings for output voltage and current.

Key benefits:

Portable HV Tester
DC and insulation testing of cables, joints, electrical fixtures, etc.
High flexibility with built-in battery

Description

The HV Tester 25 kV is a highvoltage generator with a variable negative DC output voltage of 0 � 25 kV.

The HV Tester 25 kV is used for:

Testing of newly installed cables and splices before they are taken into service

Testing of disconnected cables

Testing of electrical installations

Preventive checks after repairs and work on cables and other installations

Technical features

Easy operation

Built-in rechargeable battery for mains independent

operation

Low weight and compact design

Integrated discharge

Built-in timer

Stabilized adjustable output voltage

Voltage measurement direct at high-voltage output

HV-on with 0 kV interlock

Output short-circuit and open-circuit proof

Grounding safety circuit

Standard accessories

Scope of Delivery

Tester, incl. rechargeable battery and leather case

Mains lead

Battery lead for external DC battery, approx. 3 m

Ground lead, approx. 3 m, for connection to station ground

Ground lead, approx. 3 m, for connection to protective ground

High voltage lead, approx. 3 m, with terminal

Operating manual

Recommended options

More products SEBAKMT

SEBA SMART THUMP 16 CABLE FAULT LOCATION SYSTEM ON LOW AND MEDIUM VOLTAGE CABLES

• 1500J at 8 / 16 kV, 16 kV DC-HV proof test 23/46mA Burning
• Integrated ARM and ICE Prelocation
• Easy Go - automatic sequence to proof test, pre-locate & pinpoint
• Automatic interpretation of test results
• Sunlight readable, transflective 5.7" TFT colour display
• Safe OP Check protects user from incorrect or faulty lead connections
• USB interface for trace export via USB flash drive

SEBA KMT KMK 8 COMMUNICATIONS NETWORK CABLE TESTER

• Integrated Reflectometer (TDR)
• Active bridge for high precision R and C measurements and DC and AC fault location
• Measurement by Graaf method in connection with an active slave at the far end
• Passive Wheatstone bridge for R and C measurements and DC and AC fault location
• Test Systems for Pre-measurement, Quick test and Quality testing
• Measurement of interference voltages
• Warning and information system
• Remote control for the operation of the electronic far end loop control switch

SEBA KMT EASYLOC CAM LOCATION SYSTEM FOR LOCATION AND DEPTH MEASUREMENT OF SEWER TV CAMERAS

• 3 active frequencies (512 Hz, 640 Hz und 33 kHz)
• depth measurement at the push of a button
• Maximum marker to mark the strongest signal
• optional: Carry Bag - for easy and safe transport of Easyloc Cam
• optional: Pipeline sonde - for location non-metallic pipes

SEBA SFX 5-1000 SPG 5-1000 CABLE FAULT LOCATION SYSTEM ON LOW AND MEDIUM VOLTAGE CABLES

• ICEplus for the easy and reliable fault prelocation without interference from branches
• High surge energy for pinpointing
• Compact and lightweight construction
• Testing up to 5 kV
• Automatic detection of the breakdown voltage
• Pinpointing with the integrated surge generator 0 � 2 / 4 kV 1000 J
• Pulsed DC for sheath fault pinpointing

SEBA KMT HPG 50..110-H DC & AC HIGH VOLTAGE CABLE TESTING SETS

• HPG 50-H, AC testing up to 35 kVRMS / DC-testing up to 50 kV
• HPG 70 / 80-H, AC testing up to 50 / 58 kVRMS / DC-testing up to 70 / 80 kV
• HPG 110-H, AC testing up to 78 kVRMS / DC-testing up to 110 kV
• Suitable for AC-testing and DC-testing
• Compact, cast-resin high-voltage transformers
• Separate control and HV-units
• Voltage continuously adjustable
• Powerful system: 1,2 kVA continuous operation, up to 3 kVA 60 min. short-time operation

SEBA KMT T22/13B BURN UNIT FOR TESTING MEDIUM VOLTAGE CABLES T22-13B

• Short circuit proof
• Equipped with new circuity to keep Burn-Down power constant
• Maximal Burn-Down current of 25A
• Burn-Down voltage constinuously variable from 0 to 15 kV
• Indication of output current and voltage
• Integrated start interlock circuit and discharging device
• Pulse mode for earth leakage

SEBA KMT VLOCML2 PIPELINE LOCATION AND TRACING FOR UNDERGROUND PIPES AND CABLES

• Location of passive markers which are used by utility
• companies for labelling underground lines
• Colour-coded display of the signal strength
• Specifi c line location mode
• Specifi c marker location mode
• Mode for simultaneous location of lines and markers

SEBA KMT HV TESTER 25KV HIGH VOLTAGE DC TESTER

• DC output voltage of 0 - 25 kV
• Portable HV Tester
• DC and insulation testing of cables, joints, electrical fixtures, etc.
• High flexibility with built-in battery

SEBAKMT CORRELUX C-3 HYBRID LEAK NOISE CORRELATOR, ONLINE AND OFFLINE

• Precise leak detection
• State-of-the-art sensor technology
• Online and offline correlation
• Simple operation
• Robust design

SEBA TELEFLEX SX CABLE REFLECTOMETER FOR FAULT LOCATION MEGGER

• ARMslide technology with 15 traces in one ARM shot
• ProRange for optimised display of distant details
• Support of all existing prelocation technologies
• Automatic adjustment and display of cable end and fault
• Compatible with all fault location systems