Cable Fault Locators | SEBAKMT

Seba KMT ESG NT Pinpointing Earth Fault Locator in sheath of underground cables

Code: Seba-KMT ESG-NT

Datasheet

PDF, 0.45 Mb

Description

ESG NT

The earth fault locator ESG NT is used for the high accuracy pinpointing of a sheath fault. State of the art technology in connection with a bright, sun readable TFT color Display allows an very easy use.

The display happens by a bargraph, similar to the analogue display or by a history display, which shows the deflections of the last 7 pulses. A fully automatic calibration keeps the display always at zero and the integrated noise suppression eliminates all influences by DC, Railway currents, industrial plants and high resistive soil environment. By two earth rods, the ground step voltage potential is measured and the direction towards the fault is indicated by the display.

Key benefits:

Automatic adaptation to voltage level
Automatic filtration of interfering signals
Automatic zero calibration, no adjustments necessary
History mode
High-contrast color display

As source for the exact pinpointing with the ESG NT the following equipment is available:

BT 500 IS-1
MMG 10
MFM 10
and all other SebaKMT systems with pulsed output voltage for sheath fault pinpoint location

The ESG NT is also available as combination set with the digiPHONE+ in one unit.

All advantages at a glance
Automatic suppression of external potentials
Automatic adaptation to the voltage level
Automatic detection of the pulse rate
Automatic zero adjustment
Very high measuring sensitivity in the µV range
Very easy operation
Cable mounting at the dividable insulated earth rod

Standard accessories

Receiver ESG NT

2 earth rods

2 connection cables

1 set of batteries

Manual

Recommended options

Options

A-Frame

Vehicle Mounting

More products SEBAKMT

SEBA KMT KMK 8 COMMUNICATIONS NETWORK CABLE TESTER

• Integrated Reflectometer (TDR)
• Active bridge for high precision R and C measurements and DC and AC fault location
• Measurement by Graaf method in connection with an active slave at the far end
• Passive Wheatstone bridge for R and C measurements and DC and AC fault location
• Test Systems for Pre-measurement, Quick test and Quality testing
• Measurement of interference voltages
• Warning and information system
• Remote control for the operation of the electronic far end loop control switch

SEBA KMT OWTS M28 PARTIAL DISCHARGE TEST AND FAULT LOCATION SYSTEM IN CABLE INSULATION

• PD Measurement by means of DAC similar to nominal net frequency
• Online processing for complex PD-Diagnosis
• Portable test system, compact design and low weight
• Integrated tan d - measurement

SEBA KMT HVB-10 10KV CABLE FAULT LOCATION, STEATH TESTING AND PINPOINTING MEGGER HVB10

• Output voltage 0 � 10 kV DC, bi-polar
• Automatic test sequence
• Bi-polar prelocation for the elimination of external influences
• Detection and indication of wrong connections
• Touchscreen and rotary encoder
• Only one HV connection cable
• Completely independent of the parameters of auxiliary lines

SEBA KMT VFL CR-28..60 VLF TEST SYSTEMS FOR MEDIUM VOLTAGE CABLE TESTING

• VLF CR-28 up to cable series 15 kV
• VLF CR-40 up to cable series 23 kV
• VLF CR-60 up to cable series 35 kV
• VLF, DC and sheath fault testing in one device
• Portable thanks to two-part construction
• High test capacitance
• Integrated discharge system
• Reporting

SEBA TELEFLEX-VX ADAPTER FOR SAFE OPERATION OF REFLECTOMETERS ON OVERHEAD LINES

• Very easy to operate
• Very good resolution, for both near and distant ranges
• Dangerous induction voltages reliably discharged
• Connection to a measurement system
• Test pulses up to 1,500 V for long distances
• For distances over 2,000 km

SEBA TELEFLEX T3060 SINGLE-PHASE POWER CABLE REFLECTOMETER T 3060

• Range 8 km, 64 km (for ICE and Decay only)
• Fully equipped reflectometer with cursor, gain, and range adjustment
• High-contrast 5.7’’ TFT color display (640 x 480 pixel), with LED backlight
• Single-phase ARM input with ICE, Decay and Trigger
• AC or battery operated (up to 3 hours battery life)

SEBA TELEFLEX LV MONITOR CABLE FAULT LOCATION SYSTEM WITH MONITORING MEGGER

• Fault location on live low voltage cables
• 3 phase cable monitor for a permanent check of current and voltage
• GSM remote controlled system

SEBAKMT HL50-BT PORTABLE WATER LEAK DETECTOR

• Simple operation with just two function buttons
• Frequency filter
• Always ready for use thanks to rechargeable battery
• External ground microphones can be connected for professional leak detection

SEBA KMT EASYLOC CAM LOCATION SYSTEM FOR LOCATION AND DEPTH MEASUREMENT OF SEWER TV CAMERAS

• 3 active frequencies (512 Hz, 640 Hz und 33 kHz)
• depth measurement at the push of a button
• Maximum marker to mark the strongest signal
• optional: Carry Bag - for easy and safe transport of Easyloc Cam
• optional: Pipeline sonde - for location non-metallic pipes

SEBA TELEFLEX SX CABLE REFLECTOMETER FOR FAULT LOCATION MEGGER

• ARMslide technology with 15 traces in one ARM shot
• ProRange for optimised display of distant details
• Support of all existing prelocation technologies
• Automatic adjustment and display of cable end and fault
• Compatible with all fault location systems