Cable Fault Locators | SEBAKMT

Seba KMT CI LCI Cable Identifier test set

Code: Seba-KMT CI LCI

Datasheet

PDF, 0.7 Mb

Description

Cable Identifier

The unmistakable identification of a cable prior to cutting or mounting is an absolute safety related task. A wrong selection can result in fatal consequences for the operator and caused the loss of supply for the connected customers. For the easy, reliable and safe selection of cables, SebaKMT developed the CI cable selection system.

The CI TX Transmitter generates impulses of up to 100 A. Due to the limitation of impulse voltage to 55 V, the voltage is below the dangerous contact voltage limit, as specified by the German VDE 0100.

The CI RX receiver uses a flex clamp to measure the selection signals. The processor of the CI RX does an evaluation if the impulse shape, polarity, amplitude and frequency and generates an absolute reliable statement.

Key benefits:

Easiest operation
Safe selection
Small, light and handy

Inexpensive cable selection system

Easy to operate

Safe handling

Very small

Standard accessories

Basic CI set for identification on de-energised cables

»» Transmitter CI TX

»» Receiver CI RX with

230 mm flex clamp

»» Supplied with all

necessary connection

cables, mains leads,

clips and clamps

»» Case

Basic LCI set for identification on energised cables

»» Transmitter LCI TX

»» Receiver CI RX with

230 mm flex clamp

»» Supplied with all

necessary connection

cables, mains leads,

clips and clamps

»» Case

Complete CI and LCI Set

»» Transmitter CI TX & LCI TX

»» Receiver CI RX with

230 mm flex clamp

»» Supplied with all

necessary connection

cables, mains leads,

clips and clamps

»» Case

Recommended options

Optional accessories

»» 120 mm Flex-Coupler

»» Contact sensor PAS CI

»» Twisted field sensor TFS CI

»» NH test adapter

»» ISO 9001: 2008

»» LCI TX 440 for selection between phases

More products SEBAKMT

SEBA KMT HV TESTER 25KV HIGH VOLTAGE DC TESTER

• DC output voltage of 0 - 25 kV
• Portable HV Tester
• DC and insulation testing of cables, joints, electrical fixtures, etc.
• High flexibility with built-in battery

SEBA KMT HV TEST SET 50KV 80KV 110KV DC HIGH VOLTAGE TESTER

• available in three versions: 50kV 80kV 110kV DC
• Highest safety by monitoring functions and easy operation
• Quick and easy mounting with compact and simple setup
• Meeting individual needs by modular design

SEBA KMT OWTS M60 DIELECTRIC DIAGNOSIS AND PARTIAL DISCHARGE MEASURING SYSTEM

• PD diagnosis under oscillating wave test voltage
• PD evaluation possibility and pattern recognition at the nominal voltage level
• Automatic Calibration and Joint location facility
• PD level measurement according to IEC 270 at a bandwidth of 150 ... 650 kHz
• Semi- and fully automatic PD analysing software for defect location with mapping feature
• Calculation of the cable capacitance and the tan delta value
• Simple to use and easy to handle menu-driven unit for operation of the test sequence
• Compact design; low weight

SEBA KMT SEBALOG CORR MULTI-CORRELATOR LOGGER FOR WATER LEAK DETECTION AND LOCATION

• Correlation with up to 8 sensors at the same time
• GPS navigation directly to the leak
• Radio communication to the sensors
• No staff needed for night measurement
• Sound velocity assistant (V-assistant)
• Unique pinpointing mode

SEBA KMT VFL CR-20 VERY LOW FREQUENCY CABLE TESTING SYSTEM

• VLF Test System 20 kV
• high test capacity of 3 µF permits the simultaneous testing of all three phases
• method is officially recommended by the two VDE Standards 0276-620 and 0276-621
• VLF is the most economic method for testing PE and XLPE cables

SEBA KMT EASYLOC CAM LOCATION SYSTEM FOR LOCATION AND DEPTH MEASUREMENT OF SEWER TV CAMERAS

• 3 active frequencies (512 Hz, 640 Hz und 33 kHz)
• depth measurement at the push of a button
• Maximum marker to mark the strongest signal
• optional: Carry Bag - for easy and safe transport of Easyloc Cam
• optional: Pipeline sonde - for location non-metallic pipes

SEBA KMT HPA35 HPA50 HPA58 HPA78 AC HIGH VOLTAGE HIPOT TESTING WITHSTANDING

• HPA 35, AC testing up to 35 kVrms
• HPA 50 / 58 AC testing up to 50 / 58 kVrms
• HPA 78, AC testing up to 78 kVrms

SEBA KMT PD SURVEYOR AIR PARTIAL DISCHARGE DETECTOR FOR MEDIUM VOLTAGE CABLES, SWITCHGEAR, PLANTS

• Three PD sensor technologies in one device
• Early detection of PD activity
• Universal application - can be applied to
• MV cables, MV switchgear & other types of MV plants
• Directs maintenance resources straight to the problem areas
• Easy to use

SEBA KMT VFL CR-28..60 VLF TEST SYSTEMS FOR MEDIUM VOLTAGE CABLE TESTING

• VLF CR-28 up to cable series 15 kV
• VLF CR-40 up to cable series 23 kV
• VLF CR-60 up to cable series 35 kV
• VLF, DC and sheath fault testing in one device
• Portable thanks to two-part construction
• High test capacitance
• Integrated discharge system
• Reporting

SEBA KMT VFL SINUS 34KV 0.1HZ SINE WAVE CABLE TEST SYSTEMS

• High test capacity of 5 µF
• Suitable for outdoor use (IP 54)
• Single-button operation easyGO
• Integrated safety system
• Reporting
• Continuous duty cycle