The high voltage test set HPG 70-K from SebaKMT is a fully insulated test set for DC testing up to 70 kV. Thanks to its fully insulated design this system is ideal for stand-alone applications. The DC voltage is obtained through a bridge rectifier which ensures a very low ripple of the test voltage. Moreover the DC voltage is measured on the secondary side and therefore ensures a precise output voltage.

Typical application areas:

Testing of cables
Testing of switchgear
Testing of current-transformers
Testing of MV plant/ component testing

Key benefits:

Highest safety thanks to fully insulated design
Compact and lightweight
Separate control and HV-unit
Voltage continuously adjustable
Expandable with a VLF CR attachment for VLF testing on MV cables

System description

SebaKMT’s high voltage test set HPG 70-K is a fully insulated

test set for DC testing up to 70 kV. Thanks to its fully insulated

design, this system is ideal for stand-alone applications. The

DC voltage is obtained through a bridge rectifi er which

ensures a very low ripple of the test voltage. Moreover, the

DC voltage is measured on the secondary side and therefore

ensures a precise output voltage.

The high voltage test equipment HPG 70-K consists of two

parts and is used for testing of cable installations either as a

stand-alone unit or built into a module or cable test van. The

control unit HSG 1 includes a variac. Its output voltage feeds

the high voltage unit HVT 70.

The high voltage unit HVT 70-K is fully insulated. The test

voltage of 70 kV DC is drawn from a socket outlet and plug

and fed to the cable under test. For feeding of the control

voltage of 0 � 230 V AC, a multi-pole connection lead to the

control unit is supplied.

For testing of polymer insulated cables the test system can

be expanded with a VLF CR attachment. This attachment

will allow high-capacitance testing up to 54 kV at 0.1Hz.

Standard accessories

Scope of delivery HPG 70-K

Control unit HSG 1

HV-unit HVT 70-K

Kabelsatz

Entladestab 75 kV

Scope of delivery HPG 70-K-VLF

Control unit HSW 3-VLF

HV-unit HVT 70-K

VLF attachment VLF PZ

Set of cables

Discharge rod 75 kV

Recommended options

More products SEBAKMT

SEBA KMT EZ-THUMP CABLE FAULT LOCATION SYSTEM ON LV/MV CABLES

• Easiest, fully automatic operation
• All in one small and portable unit
• ARM Prelocation
• Pinpointing with 500 J
• Available as 4 or 12 kV version
• Bright, brilliant colour display
• Battery operation

SEBA EASYFLEX COM REFLECTOMETER LOCATE FAULTS ON CU TELECOMMUNICATION, SIGNAL AND POWER CABLES

• Test range 50 m ... 15000 m
• High local resolution of 5 cm in 50 m test range
• Simple operation due to menu prompting and help functions
• Easy evaluation of the traces by simultaneous display of zoom and total view (split-screen)
• Large display with backlight
• Individual measurement, continuous measurement and averaging
• Measuring connections suitable for live voltage up to 250 V

SEBA T18/5 SURGE WAVE VOLTAGE GENERATOR FOR CABLE FAULT LOCATING

• Voltage Ranges : 0..3kV / 0..6kV / 0..12kV
• Energy : 1000 Joules

SEBA KMT VCAM LSR SEWER PIPELINE VIDEO INSPECTION CAMERA

• Flexibility, allowing multiple uses
• 3 camera head options
• Recording of the video via the VIDEO OUT
• Integrated distance counter and 640 Hz sonde
• Integrated rechargeables
• Expandable, with flex rod incorporating 9 or 11 mm diameter camera head

SEBA KMT VFL CR-20 VERY LOW FREQUENCY CABLE TESTING SYSTEM

• VLF Test System 20 kV
• high test capacity of 3 µF permits the simultaneous testing of all three phases
• method is officially recommended by the two VDE Standards 0276-620 and 0276-621
• VLF is the most economic method for testing PE and XLPE cables

SEBA KMT KMK 8 COMMUNICATIONS NETWORK CABLE TESTER

• Integrated Reflectometer (TDR)
• Active bridge for high precision R and C measurements and DC and AC fault location
• Measurement by Graaf method in connection with an active slave at the far end
• Passive Wheatstone bridge for R and C measurements and DC and AC fault location
• Test Systems for Pre-measurement, Quick test and Quality testing
• Measurement of interference voltages
• Warning and information system
• Remote control for the operation of the electronic far end loop control switch

SEBA KMT GEOLUX GL 660-1 EARTH FAULT LOCATOR FOR FAULT LOCATION IN ISOLATED, EARTH FREE SYSTEMS

• Earth fault locator for fault location in isolated, earth free systems
• Mains filter for direct coupling to live cables up to 660 V
• Pulsed output current for easier detection of the test signal
• Filter for the suppression large interference signals
• Location of earth faults up to 150 kOhm
• No switch off during the fault location required
• No influence to the signal lines connected to

SEBA KMT VLOCCAM2 LOCATION SYSTEM FOR LOCATION AND DEPTH MEASUREMENT OF SEWER TV CAMERAS

• Directional compass for fast and precise location of camera heads or sondes
• Continuous depth measurement
• Passive frequencies (current and radio signal) to prevent cable damage
• Sunlight-compatible colour display

SEBA TELEFLEX T3060 SINGLE-PHASE POWER CABLE REFLECTOMETER T 3060

• Range 8 km, 64 km (for ICE and Decay only)
• Fully equipped reflectometer with cursor, gain, and range adjustment
• High-contrast 5.7’’ TFT color display (640 x 480 pixel), with LED backlight
• Single-phase ARM input with ICE, Decay and Trigger
• AC or battery operated (up to 3 hours battery life)

SEBA KMT EASYLOC RXTX PIPELINE LOCATION AND TRACING FOR UNDERGROUND PIPES AND CABLES

• Make optimum preparations for your building work, quickly and reliably
• Avoid cable damage and help to minimise costly accidents and inconvenient delays
• Depth measurement at the push of a button, even without a transmitter
• 33 kHz - compatible with other location systems
• Large display with automatic backlight
• Quick and simple to operate