Cable Fault Locators | SEBAKMT

Seba Smart Thump 16 Cable Fault Location System on Low and Medium Voltage Cables

Code: Seba-KMT Smart-Thump-16

Datasheet

PDF, 0.2 Mb

Description

Smart Thump 16

Powerful, mobile and robust fault location system for fault location in low and medium voltage cable systems

This new system requires significantly less training than a traditional thumper-only system. The SMART-Thump™ 16 is the only fault locator with built-in intelligence to interpret the results of the initial test sequence. The "Turn & Click" rotary button operation lets the user automatically proof test, prelocate, and pinpoint the fault from one convenient control console. No adjustments are required.

Key benefits:

1500 J at 8 / 16 kV, 16 kV DC-HV proof test 23/46mA Burning
Integrated ARM and ICE Prelocation
Easy Go - automatic sequence to proof test, pre-locate & pinpoint
Automatic interpretation of test results
Sunlight readable, transflective 5.7" TFT colour display
Safe OP Check protects user from incorrect or faulty lead connections
USB interface for trace export via USB flash drive

Available modes

ARM® Arc Refl ection Method
ICE (Surge Pulse)
Direct surging (Thump)
DC-HV proof test with breakdown recognition
Burning
Sheath testing and pinpointing

All results are automatically shown on the transflexive

5.7�� TFT display as ARM reference and fault trace.

The integrated battery with charger and inverter provides

sufficient power for a minimum of 30 minutes of surge

operation, which is in many cases sufficient for the location

of two faults.

Features

Easy Mode and Expert Mode
Integrated refl ectometer
Direct display of all important data
Integrated current measurement
USB interface for protocolling
Solid design, manoeuvrable unit
Weatherproof for outdoor use
F-Ohm safety system

Standard accessories

Options

System without battery
System without trolley and battery for vehicle installation

Recommended options

More products SEBAKMT

SEBA KMT VM-850 LOCATION UNDERGROUND PIPES AND CABLES

• Easy to use
• High location accuracy
• Optimal inductive transmission of line signals
• Classic design, compact and light

SEBA KMT OWTS M60 DIELECTRIC DIAGNOSIS AND PARTIAL DISCHARGE MEASURING SYSTEM

• PD diagnosis under oscillating wave test voltage
• PD evaluation possibility and pattern recognition at the nominal voltage level
• Automatic Calibration and Joint location facility
• PD level measurement according to IEC 270 at a bandwidth of 150 ... 650 kHz
• Semi- and fully automatic PD analysing software for defect location with mapping feature
• Calculation of the cable capacitance and the tan delta value
• Simple to use and easy to handle menu-driven unit for operation of the test sequence
• Compact design; low weight

SEBA KMT VFL CR-20 VERY LOW FREQUENCY CABLE TESTING SYSTEM

• VLF Test System 20 kV
• high test capacity of 3 µF permits the simultaneous testing of all three phases
• method is officially recommended by the two VDE Standards 0276-620 and 0276-621
• VLF is the most economic method for testing PE and XLPE cables

SEBA EASYFLEX COM REFLECTOMETER LOCATE FAULTS ON CU TELECOMMUNICATION, SIGNAL AND POWER CABLES

• Test range 50 m ... 15000 m
• High local resolution of 5 cm in 50 m test range
• Simple operation due to menu prompting and help functions
• Easy evaluation of the traces by simultaneous display of zoom and total view (split-screen)
• Large display with backlight
• Individual measurement, continuous measurement and averaging
• Measuring connections suitable for live voltage up to 250 V

SEBAKMT HL50-BT PORTABLE WATER LEAK DETECTOR

• Simple operation with just two function buttons
• Frequency filter
• Always ready for use thanks to rechargeable battery
• External ground microphones can be connected for professional leak detection

SEBA KMT VFL CR-80 46KV HIGH VOLTAGE CABLE TEST SYSTEMS

• Powerful 0.1 Hz VLF test system
• High test power without frequency reduction
• No polarisation effects as by DC testing
• Protocoling
• Breakdown recognition
• Leakage current measurement

SEBA KMT VFL CR-28..60 VLF TEST SYSTEMS FOR MEDIUM VOLTAGE CABLE TESTING

• VLF CR-28 up to cable series 15 kV
• VLF CR-40 up to cable series 23 kV
• VLF CR-60 up to cable series 35 kV
• VLF, DC and sheath fault testing in one device
• Portable thanks to two-part construction
• High test capacitance
• Integrated discharge system
• Reporting

SEBA SURGEFLEX SFX 8-1000 CABLE FAULT LOCATING SYSTEM

• Small, light and portable
• Very low voltage levels
• Complete fault location with DC Testing up to 8 kV
• Prelocation with ARM and ICE
• Burning with up to 1.4 A

SEBA KMT HPA 100 AC HPA 130 DC BURNDOWN HIGH VOLTAGE TESTING

• Powerful test- and burning system
• Continuous testing with AC voltages up to 100 kVrms at 5 kVA
• Own noise-level below 1 pC
• Built-in overcurrent protection
• DC testing up to 130 kV with optional rectifier

SEBA KMT SEBALOG CORR MULTI-CORRELATOR LOGGER FOR WATER LEAK DETECTION AND LOCATION

• Correlation with up to 8 sensors at the same time
• GPS navigation directly to the leak
• Radio communication to the sensors
• No staff needed for night measurement
• Sound velocity assistant (V-assistant)
• Unique pinpointing mode