The DDA-16, DDA-30, DDA-60 use the latest in DSP technology to control the circuit breaker test sets and also measure the reactions of the breaker under test. The retrofit capabilities allow a user of Multi-Amp circuit breaker tests sets the capability of upgrading existing systems without the expense of purchasing a new system. The DSP technology provides complete digital control of the SCRs and digitally samples the output current for high-accuracy measurements.

Features:

Drop-in retrofit capability to the Multi-Amp Model CB-9116, Model DB-8130 and Model CB-8160 circuit breaker test sets
Digital Signal Processing (DSP) technology
Variable pulse time and firing-angle output-current control
Complies with NEMA AB-4 Test Guidelines

More products MEGGER

ELECTRICIAN'S MULTIMETER MEGGER - AVO210

• 2000 count digital display
• 1000 V DC / 750 V AC ranges
• 10 A AC / DC ranges
• Resistance, frequency and capacitance ranges

MEGGER TDR2000/3 1003-036 TDR2000/3P 1003-037 DUAL CHANNEL CABLE TDR

• best resolution of 0.1m the TDR2000/2 has a 20km maximum range
• Comprehensive Dual Channel capability with dual aspect display.
• AUTO set up mode for instant use.
• Ultra fast pulse for near end fault identification.
• Xpert guidance to potential fault.
• IP54 rating offers real life working.
• Designed for use on all metallic paired cables.

MICROPROCESSOR-BASED CIRCUIT BREAKER TEST SETS MEGGER PS-9116

• Portable, three piece chassis
• Tests wide range of air-frame breakers
• Test result printout capability

STATIC / DYNAMIC RESISTANCE MEASUREMENT ACCESSORY FOR EGIL MEGGER - SDRM201

• Enables resistance measurement on circuit breakers
• Small and light weight
• A number of operations can be run with short waiting intervals

MEGGER TORKEL 820 BS-49092 TELECOM BATTERY LOAD DISCHARGE TESTER PROGRAMMA

• Combines efficiency with portability
• Batteries can be tested "in service"
• Discharge 24 and 48 V batteries at a current of 270 A
• 12 V batteries at 135 A
• Two or more TORKEL 820 units and/or extra load units TXL, can be linked together if you need higher current.

UNIVERSAL CIRCUIT BREAKER TEST SETS MEGGER DDA-3000 AND DDA-6000

• Model DDA-1 Digital Data Acquisition Instrumentation and Control System
• High-current output: 60,000 A for Model DDA-6000; 35,000 A for Model DDA-3000
• Digital signal processing (DSP) technology
• Variable pulse time and firing angle output current control
• Compliant with NEMA AB-4 test guidelines

MEGGER OTS60AF OTS80AF OTS100AF OIL BREAKDOWN TESTER 60KV 80KV 100KV

• Test voltages : 60 kV, 80 kV and 100 kV
• Laboratory instruments for measuring insulating oil breakdown voltage
• Lock in precision - oil vessel with lockable adjustment
• Bright 3.5" colour display
• Suitable for mineral, ester and silicon oils
• Trip detection circuit with direct measurement of voltage and current
• Ultra fast (< 10 µs) HV switch off time

PRIMARY CURRENT INJECTION TEST SYSTEM MEGGER ODEN AT

• Most advanced primary current injection test system to simplify all types of switchgear and CT commissioning, ground grid, circuit breaker testing and more
• Modular design to permit optimal user configuration of output current vs. unit size
• Compact transport cart facilitates portability into switchgear rooms with limited space
• Unique I/30 function allows the current to be pre-set using low current to prevent test sample heating, thus eliminating corruption of test result

MEGGER MPQ2000 POWER ENERGY QUALITY ANALYZER CLASS-A

• Powered off of phase A voltage AC/DC
• Weatherproof to IP54 standard for use in any environment
• 1000 VAC and 1500 VDC range
• Auto CT identifies the current that the instrument is connected to and the range that it is in
• Real time scope and DVM
• IEC61000-4-30 Class A compliance

MEGGER TDR1000/3 TIME DOMAIN REFLECTOMETER & CABLE FAULT LOCATOR

• minimum resolution of 0.1 m and a 5 km maximum range
• Simple operation.
• AUTO set up for instant use.
• Ultra fast pulse for near end fault identification.
• Trace HOLD feature to allow comparison between cables.
• IP54 rating offers real life working.
• Designed for use on all metallic cable pairs.