204-channel portable logic analyzer
4 GHz (250 ps) timing zoom with 64 K memory
1.0 GHz / 500 MHz (half / full-channel) conventional timing with deep memory
500 MHz transitional timing
up to 450 MHz State clock rates
up to 500 Mb/s Data rates
up to 32 M acquisition memory depth
15-inch (38.1 cm) color display with touch screen available(option 103)
Comprehensive single-ended signal support, threshold is adjustable in -5 V to 5 V (10 mV increments)
Automated threshold/sample position setup for accurate measurements on high-speed buses
Simultaneous eye diagrams on all channels identify problem signals quickly
Selectable memory depths: 1 M, 4 M, 16 M, 32 M

Recommended options

16800A-0B3	Service Manual
16800A-103	Front Panel with 15 inch display and touchscreen
16800A-109	External removable hard drive for 16800 series logic analyzers
16806A-001	Standard 1 M acquisition memory depth
16806A-004	Increase acquisition memory depth to 4M
16806A-016	Increase acquisition memory depth to 16M
16806A-032	Increase acquisition memory depth to 32M
16806A-500	Increase maximum state speed to 500 Mb/s
16806A-A6J	ANSI Z540 Compliant Calibration
E5346A	Probe, 34 channel single-ended Mictor connector, connects to 40-pin LA cable
E5383A	Probe, 17-channel single-ended flying leads, connects to 40-pin LA cable
E5385A	Probe, 34 channel single-ended Samtec connector, connects to 40-pin LA cable
E5394A	Probe, 34 channel single-ended soft touch connectorless, connects to 40-pin LA cable
E5394A-001	Retention Module
E5396A	Probe, 17 channel single-ended soft touch connectorless, connects to 40-pin LA cable
E5396A-001	Retention Modules
E5403A	Kit of 5 retention modules for Pro Series Soft Touch Connectorless Probes
E5404A	Probe, 34 channel, soft touch pro, single-ended, connects to 40-pin LA cable

More products KEYSIGHT

USB MODULAR DIGITAL I/O 32-CH. INPUT+32-CH. OUTPUT AGILENT U2651A

• Hi-Speed USB 2.0 (480 Mbps)
• 32 Input opto-isolated lines
• 32 Output opto-isolated lines
• Functions as standalone or modular unit
• Up to 1250 Vrms isolation protection

PXI RF MATRIX SWITCH 3GHZ QUAD 1 X 4, 75 OHM AGILENT M9151A

• RF signal routing to 3 GHz for 75 ohm applications
• Quad 1x4 75 ohm RF switch multiplexer to 3GHz
• 30V, 1A, 10W switching
• 75 ohm input impedance
• 43 dB isolation at 1 GHz

FET MULTIPLEXER MODULE 40/80 OPTICALLY ISOLATED CHANNELS AGILENT 34925A

• 40 2-wire channels or 80 1-wire channels
• Mixed 2- or 4-wire configurations
• High-speed optically isolated FET switches, with relay counter

AGILENT 3458A DIGITAL PRECISION MULTIMETER 8.5 DIGIT

• 8.5 digit
• 8-ppm 1 year dcV accuracy, optional 4-ppm
• 0.05 ppm dcV transfer accuracy

DIGITAL OSCILLOSCOPE 2 X 100 MHZ AGILENT DSO7012B

• 100 MHz bandwidth
• 2 GSa/s sample rate
• 2 analog channels
• Standard 8 Mpts MegaZoom III deep memory

AGILENT E4428C ESG RF SIGNAL GENERATOR 250 KHZ..3 GHZ OR 6 GHZ

• 250 kHz to 3 GHz or 6 GHz
• 0.01 Hz resolution
• -136 to 17 dBm @ 1 GHZ and 10 dBm @ 6 GHz output power
• AM, FM, ØM, and pulse modulation

AGILENT 33521A FUNCTION / ARBITRARY WAVEFORM GENERATOR 30 MHZ

• 30 MHz sine, square, and pulse bandwidth cover more applications
• 250 MSa/s, 16-bit sampling rate for higher time-resolution arbitrary waveforms

PXI MICROWAVE SWITCH MODULE DC-26.5GHZ AGILENT M9155C

• Hybrid Dual SPDT Coaxial Switch Unterminated
• Broadband from DC to 26.5 GHz
• Unmatched isolation 92 dB at 8 GHz
• Long life cycles - 5 million cycles guaranteed, 10 million cycles typical

AGILENT E3610A E3611A E3612A E3614A E3615A E3616A E3617A E3620A E3630A LABORATORY DC POWER SUPPLIES 30-60W

• Linear power supply
• Single, dual or triple output
• 10-turn voltage and current control
• Low noise and excellent regulation

AGILENT 81130A 81131A PULSE DATA GENERATOR 400 MHZ

• 1 kHz to 400 MHz
• 1 or 2 Channels(order 2 x 81131A modules)
• 800 ps or 1.6 ns selectable
• Up to 3.8 Vpp into 50 O