True universal power sensor for a vast number of applications
10 MHz to 18 GHz
-67 dBm to +23 dBm (200 pW to 200 mW)
90 dB dynamic range for CW and modulated signals
Innovative three-path diode power sensor with enhanced inter-range performance
Continuous average, burst average, timeslot average, time gating and trace mode supported (video bandwidth 100 kHz)
Automatic burst detection and acquisition
Up to 1500 measurements/s (buffered mode)
Low sensitivity to harmonics

Alte produse ROHDE SCHWARZ

GENERATOR DE MICROUNDE 100 KHZ..22 GHZ/ 43.5 GHZ ROHDE & SCHWARZ SMF100A

• 1 GHz to 22 GHz or 43.5 GHz Frequency ranges
• 100 kHz to 1 GHz Optional Frequency Extension
• +25 dBm Very high output power

POWERMETRU RF USB 10 MHZ..8 GHZ ROHDE & SCHWARZ NRP-Z11

• 10 MHz to 8 GHz
• -67 dBm to +23 dBm (200 pW to 200 mW)
• 90 dB dynamic range for CW and modulated signals

ANALIZOR PORTABIL CABLU & ANTENA 100 KHZ..3.6 GHZ/ 8 GHZ ROHDE & SCHWARZ ZVH

• 100 kHz to 3.6 GHz or 8 GHz Frequency range
• reflection measurement
• distance-to-fault measurement
• one-port cable loss measurement
• Optional Spectrum Analysis, Power Meter, Spectrogram, Transmission Measurement

GENERATOR SEMNAL RF 9 KHZ..1.1 GHZ/ 2.2 GHZ/ 3.2 GHZ/ 6 GHZ/ 12.75 GHZ ROHDE & SCHWARZ SMB100A

• 9 kHz to 1.1 GHz, 2.2 GHz, 3.2 GHz or 6 GHz Frequency ranges
• 100 kHz to 12.75 GHz Frequency ranges(B112 option)
• >+18 dBm RF output level from 1 MHz to 6 GHz (+25 dBm over range)
• -128 dBc/Hz SSB phase noise typ(1 GHz/20 kHz offset)

ANALIZOR DE RETEA VECTORIAL 9 KHZ..3/ 6/ 13.6 GHZ ROHDE & SCHWARZ ZVL

• 9 kHz to 3 GHz/ 6 GHz or 13.6 GHz
• Bidirectional two-port vector network analyzer
• Measurement of all four S-parameters, impedance, admittance and stability

R&S ESW EMI TEST RECEIVER

• Ultrafast measurements with FFT-based time domain scan
• Preselection with selectable highpass filters and notch filters for the ISM bands
• EMI test receiver and signal and spectrum analyzer in a single box

R&S HAMEG HMC8015 POWER ANALYZER

• Clear display of all measured parameters
• Measurement accuracy
• Everyday measurement functions

GENERATOR SEMNAL VECTORIAL 9 KHZ..3.2 GHZ/ 6 GHZ ROHDE & SCHWARZ SMBV100A

• 9 kHz to 3.2 GHz or 6 GHz Frequency range CW mode
• 1 MHz to 3.2 GHz or 6 GHz Frequency range I/Q mode
• > +18 dBm high output level
• up to120 MHz Wide RF signal bandwidth with internal signal generation
• >500 MHz Maximum RF bandwidth of I/Q modulator

R&S RTO2000 OSCILLOSCOPE

• Quickly find signal faults with 1 million waveforms/s
• 2 Gsample deep memory to analyze long sequences
• Up to 16-bit vertical resolution
• Multi-channel spectrum analysis

GENERATOR SEMNAL VECTORIAL 100 KHZ..2.2 GHZ/ 3 GHZ/ 4 GHZ/ 6 GHZ ROHDE & SCHWARZ SMU200A

• 100 kHz to 2.2 GHz, 3 GHz, 4 GHz or 6 GHz Frequency ranges for the first RF path
• Optional second RF path up to 2.2 GHz or 3 GHz
• Up to two complete baseband paths
• 200 MHz RF I/Q modulator bandwidth
• High output power up to +19 dBm (PEP), overrange + 26 dBm
• 2 x 2 MIMO with realtime fading possible