Modul PXI multiplexor 64-canale 100V/1A Agilent M9101A

• 99-channel, high-density 2-wire switch multiplexer
• 100Vrms
• 1A switch/carry current
• 60W max power
• Durable 60W armature switches

 

• 20,000 counts resolution with dual display
• 100 Hz / 120 Hz / 1 kHz / 10 kHz test frequencies
• inductance, capacitance and resistance measurements
• Backlight
• Auto-calculation of Phase Angle
• Dissipation and Quality Factors

 

• Fast, low-noise Single outputs
• Linear output regulation
• Overvoltage & overcurrent protection
• Measured V & I readback over GPIB

 

• 500 MHz bandwidth
• 2 analog channels plus 16 digital channels
• 2 GSa/s per channel sample rate, 4 GSa/s half-channel interleaved mode

• 136-channel portable logic analyzer
• 4 GHz (250 ps) timing zoom with 64 K memory
• 1.0 GHz / 500 MHz (half / full-channel) conventional timing with deep memory
• up to 450 MHz State clock rates
• up to 500 Mb/s Data rates
• up to 32 M acquisition memory depth

 

• RF signal routing to 3 GHz for 75 ohm applications
• 1x8 75 ohm RF switch multiplexer to 3GHz
• 30V, 1A, 10W switching
• 75 ohm input impedance
• 52 dB isolation at 1 GHz

 

• 1 GHz bandwidth
• 4 GSa/s sample rate
• 4 analog channels
• Standard 8 Mpts MegaZoom III deep memory

 

• 64 Form A channels up to 1A, 50W
• Latching armature relays, with relay cycle counter
• Temperature sensor for overheating conditions

 

• 100 kHz to 1.5 GHz / 3 GHz
• 5 Hz to 3 GHz Optional
• Transmission / Reflection test set
• S-parameter test set

 

• Dual 4x16, 8x16, or 4x32 configurations
• 128 2-wire cross-points
• 300V, 1A switch
• 2A carry current