N5230C-010	Time Domain for 13.5, 20, 40, and 50 GHZ PNA-L
N5230C-020	300 kHz to 6 GHz, 2 port, standard test set
N5230C-025	300 kHz to 6 GHz, 2 port, configurable test set and extended power range
N5230C-080	Frequency offset mode
N5230C-082	Scalar calibrated converter measurements
N5230C-120	300 kHz to 13.5 GHz, 2 port, standard test set
N5230C-125	300 kHz to 13.5 GHz, 2 port, configurable test set and extended power range
N5230C-140	300 KHz to 13.5 GHz, 4 port, standard test set
N5230C-145	300 KHz to 13.5 GHz, 4 port, configurable test set and extended power range
N5230C-146	300 KHz to 13.5 GHz, 4 port, configurable test set, extended power range, and internal second source
N5230C-1A7	ISO 17025 compliant calibration
N5230C-1CM	Rackmount kit for installation without handles
N5230C-1CP	Rackmount kit for installation with handles
N5230C-220	10 MHz to 20 GHz, 2 port, standard test set
N5230C-225	10 MHz to 20 GHz, 2 port, configurable test set and extended power range
N5230C-240	300 kHz to 20 GHz, 4 port, standard test set
N5230C-245	300 kHz to 20 GHz, 4 port, configurable test set and extended power range
N5230C-246	300 KHz to 20 GHz, 4 port, configurable test set, extended power range, and internal second source
N5230C-420	10 MHz to 40 GHz, 2 port, standard test set
N5230C-425	10 MHz to 40 GHz, 2 port, configurable test set and extended power range
N5230C-520	10 MHz to 50 GHz, 2 port, standard test set
N5230C-525	10 MHz to 50 GHz, 2 port, configuable test set and extended power range
N5230C-550	Add 4-port measurement application
N5230C-551	Add N-port calibrated measurements for 40 and 50 GHz PNA-L
N5230C-897	Built-in performance test software for Agilent inclusive calibration, perpetual license
N5230C-898	Built-in performance test software for standards compliant calibration, perpetual license
N5230C-A6J	ANSI Z540 compliant calibration
N5230C-UK6	Commercial Calibration Certificate with test data
N5231C-010	Time domain for 6 GHz PNA-L
N5231C-551	Add N-port calibrated measurements for 6, 13.5 and 20 GHz PNA-L

Alte produse KEYSIGHT

OSCILOSCOP DIGITAL 2 X 500 MHZ AGILENT DSOX3052A

• 500 MHz bandwidth
• 2 analog channels
• 2 GSa/s per channel sample rate, 4 GSa/s half-channel interleaved mode

MODUL MATRICE DUAL 4 X 8 AGILENT 34931A

• Dual 4x8, 8x8, or 4x16 configurations
• 64 2-wire cross-points
• Connections to the internal DMM
• Expandable via four 2-wire analog buses

OSCILOSCOP DIGITAL 4 X 200 MHZ CU ANALIZOR LOGIC 16 CANALE AGILENT MSOX3024A

• 200 MHz bandwidth
• 4 analog channels plus 16 digital channels
• 2 GSa/s per channel sample rate, 4 GSa/s half-channel interleaved mode

MODUL PXI MATRICE RF 3GHZ DUAL 1 X 4, 75 OHM AGILENT M9150A

• RF signal routing to 3 GHz for 75 ohm applications
• Dual 1x4 75 ohm RF switch multiplexer to 3GHz
• 30V, 1A, 10W switching
• 75 ohm input impedance
• 43 dB isolation at 1 GHz

GENERATOR DE IMPULS / FORME DE UNDA ARBITRARE 500 MHZ AGILENT 81160A

• 1 µHz - 330 MHz pulse generation with variable rise/fall time
• 1 µHz - 500 MHz sine waveform output
• 14-bit, 2.5 GSa/s arbitrary waveforms
• 1 or 2 channel, coupled and uncoupled

MODUL PXI SWITCH MICROUNDE DC-26.5GHZ AGILENT M9156C

• Hybrid Dual Transfer Switch
• Broadband from DC to 26.5 GHz
• Unmatched isolation 94 dB at 8 GHz
• Long life cycles - 2 million cycles guaranteed, 5 million cycles typical

CLESTE DE CURENT TRUE-RMS 1000A AGILENT U1212A

• 1000 A DC and True-RMS AC current measurement
• Small body and large jaw size up to 52mm
• Includes full-featured DMM with resistance, capacitance, frequency, diode check, continuity
• K-Type temperature measurements

MULTIMETRU DIGITAL DE PRECIZIE 5.5 DIGIT SI SURSA ALIMENTARE AGILENT U3606A

• 5.5 digit
• 0.025% DC Voltage accuracy
• 120,000 counts resolution
• Single-output dual range of 30V/1A or 8V/3A

MODUL PXI MATRICE RF 3GHZ 1 X 8, 75 OHM AGILENT M9152A

• RF signal routing to 3 GHz for 75 ohm applications
• 1x8 75 ohm RF switch multiplexer to 3GHz
• 30V, 1A, 10W switching
• 75 ohm input impedance
• 52 dB isolation at 1 GHz

SURSA DE PRECIZIE PROGRAMABILA 80-100W AGILENT 663XA

• Fast, low-noise, Single outputs
• Linear output regulation
• Dual-range, precision low current measurement
• High-speed programming, 2 ms (400 µs in fast mode)
• GPIB (SCPI) & RS-232