Placa PCI Digital I/O 96-canale Keithley KPCI-3160

• 12-bit resolution
• Maximum sampling rate of 1.25MS/s
• 32 single-ended or 16 differential analog inputs
• 2 analog outputs, waveform quality, up to 500kS/s
• 16 high speed digital I/O lines, up to 3MHz

 

• 1 mHz - 165 MHz frequency output range
• 2 channels
• 3 ns - 1000 s pulse width range
• 10 V amplitude into 50 O, 20 V into 1 k O

 

• Five instruments in one (IV Source, IVR Measure)
• Six models: 20 - 100W DC, 1000W pulsed, 1100V to 1uV, 10A to 10pA
• Source and sink (4-quadrant) operation
• 0.012% basic measure accuracy with 5½-digit resolution

 

• 6.5 digit DMM
• THD, THD+Noise and SINAD measurements
• 20Hz-20kHz sine wave generator
• 9.5Vrms single-ended or 19Vrms differential output
• Identifies peak spectral components(2016-P model)

 

• 6.5 digit resolution
• 0.002% 90-day basic accuracy
• 2000 readings/second at 4-1/2 digits

 

• Multiplexer, matrix, and I/O cards
• Relay closures automatically counted and stored in each card's onboard memory

 

• Measures resistances up to 10000TO
• 1fA - 20mA current measurement range
• <20 µV burden voltage on lowest current ranges
• 200 TO input impedance

 

• Source and sink (programmable load) 100fA to 100mA
• 10^14 O output impedance ensures stable current sourcing into variable loads

 

• 96 or 24 TTL-level compatible digital I/O lines
• Bi-directional I/O
• High-current driver capability, 15mA (source) and 64mA (sink)

 

• 32 optically isolated solid-state relays and digital inputs
• Direct, non-polarized switching and sensing: DC up to 60VDC, AC up to 30Vrms
• High load current capability up to 350mA