KEITHLEY DMM7510 Multimetru 7.5-digit de precizie laborator banc

• 12-bit resolution
• Throughput of up to 400kS/s
• Digital I/O scanning speeds of up to 3MHz
• 16 single-ended or 8 differential analog inputs
• 23 digital I/O lines

 

• 1 mHz - 165 MHz frequency output range
• 2 channels
• 3 ns - 1000 s pulse width range
• 10 V amplitude into 50 O, 20 V into 1 k O

 

• 7.5 digit resolution
• 100nV rms noise floor
• 7ppm DCV repeatability

 

• Source and sink (programmable load) 100fA to 100mA
• 10^14 O output impedance ensures stable current sourcing into variable loads
• Source AC currents from 2pA to 100mA for AC characterization of components and materials

 

• 10fA resolution
• 5-1/2 digit resolution
• <200µV burden voltage
• measure currents from 20fA to 20mA
• source voltage from 200µV to 505V

 

• Simplifies laser diode LIV testing prior to packaging or active temperature control
• Integrated solution for in-process LIV production testing of laser diodes at the chip or bar level
• Sweep can be programmed to stop on optical power limit
• Programmable pulse on time from 500ns to 5ms up to 4% duty cycle
• Pulse capability up to 5A, DC capability up to 1A

 

• 0.4 fA p-p (4E - 16 A) noise
• Remote PreAmp can be located at the signal source to minimize cable noise
• Up to 6½-digit resolution

 

• 32 optically isolated solid-state relays and digital inputs
• Direct, non-polarized switching and sensing: DC up to 60VDC, AC up to 30Vrms
• High load current capability up to 350mA

 

• Make low noise measurements at high speeds
• typically just 15 nV p-p noise at 1s response time
• 40..50 nV p-p noise at 60ms

 

• Sursă și măsură de precizie cu rezoluție de 6½ cifre
• Viteză de măsurare digitalizată de 1 MSamples/s
• Curent: 10 nA până la 7 A CC, 10 A Impuls
• Tensiune: 200 mV până la 200 V
• Putere: Până la 100 W CC până la 1000 W Impuls