Politici de confidentialitate

Date GDPR Termeni utilizare Politica cookies Confidentialitate Livrare si plata Cum comanzi?
Accept conditiile de utilizare Continua
 
office@distek.ro  +40 760952425   Cere ofertă (0) 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 


GOODWILL INSTEK PSH-Series

Cod: GOODWILL INSTEK PSH-Series


 
Brosura produs PDF, 2.73 Mb
   

Descriere

The PSH-Series are single output from 360 to 1080W, programmable switching DC power supplies. OVP, OCP, and OTP protect the power supply and loads from unexpected conditions. Remote sensing adds an extra level of precision by compensating cable losses between loads. The bright LCD with simultaneous parameter outputs allows effortless operation. Self-test and software calibration features also reduce maintenance efforts. SCPI commands and LabVIEW driver access through the RS-232C or the optional GPIB interface allow remote control and ATE software development. Modular architecture, dedicated rear-panel output, and the 19 inch 4U rack mounting option ensure that the PSH-Series is optimized for large systems.  

 

Features:

  • Wide input voltage range and high power factor (P.F)
  • high efficiency and high power density
  • Constant voltage and constant current operation
  • Over voltage over current and over temperature protection
  • Low ripple and noise
  • Output on/off control
  • Self-test and software calibration
  • LabView driver
  • Standard interface : RS-232C
  • Optional interface : GPIB ( IEEE-488.2 )

 

 

Programmable Switching D.C. Power Supply

 

Output Watts (W)

Output Volts (V)

Output Amps (A)

Weight (kg)

PSH-2018A

360W

0~20V

0~18A

3.3kg

PSH-3610A

360W

0~36V

0~10A

3.3kg

PSH-3620A

720W

0~36V

0~20A

6.2kg

PSH-3630A

1080W

0~36V

0~30A

9.3kg

 

Alte produse INSTEK

GOODWILL INSTEK GFG-3015

• Built-in 6 Digits Counter up to 150MHz/High Resolution
• Output Waveform : Sine,Square,Triangle,Ramp,Pulse,Sweep,Gate or Burst
• INT/EXT AM/FM Modulation
• GCV Output for Synchronization

 
GOODWILL INSTEK AFG-3000 SERIES

• Wide frequency range from 1uHz to 80/50MHz
• High 200MSa/s sampling rate
• 16-bit Amplitude Resolution
• Output from any section of 1M-point-long waveform

 
TRUSA INCERCARI 5KV GWINSTEK GPT-9801 GPT-9802 GPT-9803 GPT-9804

• 200VA AC Test Capacity
• 240x64 Ice Blue Dot matrix LCD
• Manual/Auto Mode
• Controllable Ramp-up Time
• True RMS Current Measurement
• High resolution: 1uA for measuring current, 2V for setting voltage
• Interface : RS-232C, USB device, Signal I/O and GPIB (optional)

 
GOODWILL INSTEK GPM-8213

• Two data display modes
• Standard : two major measurement items + six secondary measurement items
• Simple : displaying test data of four different measurement items
• Met the requirement of IEC 62301 power measurement
• Voltage/ current test frequency bandwidth : DC~6kHz

 
OSCILOSCOP ANALOGIC 2 X 100 MHZ GW INSTEK GOS-6103C

• 100 MHz bandwidth, Delayed Sweep
• 2 analog channels
• 10 Sets Memory for Front Panel Setting Save & Recall
• Built-In 6 digits Universal Counter
• Time Base Auto-range
• Cursor Readout with 7 Measurements

 
GOODWILL INSTEK PPS-3635

• 100 Sets of Memory
• Self Test and Software Calibration
• Meets UL CSA IEC Safety Regulation
• Auto Step Running With Time Setting

 
GOODWILL INSTEK PEL-3000E

• OCP?OPP test Automation
• Max. Slew Rate: 2.5A/us
• Dynamic mode
• Protection: OVP, OCP, OPP, OTP, RVP, UVP
• Remote Sense

 
GOODWILL INSTEK PSB-2000 SERIES

• Output Voltage Rating : 80V/800V
• Output Power Rating : 400W~800W
• Constant Power Output for Multi-Range(V&I)Operation
• Series and Parallel Operation(2 Units in Series or 4 Units in parallel Maximum)

 
GOODWILL INSTEK GPM-8212

• Simultaneous Display of W, A, V ( PF or Hz )
• True RMS V, A, W
• Auto Calibration Via Computer
• Max. / Min. / Hold Function
• High Immunity to External Noise

 
GOODWILL INSTEK PSH-SERIES

• Over voltage over current and over temperature protection
• Low ripple and noise
• Output on/off control
• Self-test and software calibration