Tester tensiune si continuitate Fluke T120

• Single point offset laser sighting
• Best accuracy in its class: + 1% of reading
• Holds temperature readings for 7 seconds
• Dual displays shows current and MAX measurements simultaneously
• Backlit display for poorly lit areas
• Wide temperature range from -30º to 500ºC (-20º to 932ºF)

 

• 1 kHz test frequency
• 0.25% accuracy
• test signal level: 2V via 400O source

 

• 400 Hz measurement
• Power inverter efficiency: Simultaneously measure AC output power and DC input power
• PowerWave data capture: Capture fast RMS data, show half-cycle and waveforms
• Energy loss calculator
• Troubleshoot real-time
• Highest safety rating in the industry
• Measure all three phases and neutral

 

• Measures AC current to 400 A with 0.1 A resolution
• Measures AC current to 40 A with 0.01 A resolution, precise low current measurements
• Measures AC volts to 600 V, with 0.1 V resolution to 400.0 V
• Measures DC volts to 600 V, with 0.1 resolution to 400.0 V
• Resistance measurement to 400 O
• Precise measurements with 1.8% basic accuracy

 

• 3.5 digit
• 6000 count resolution
• 0.15% basic accuracy
• True RMS voltage and current measurements

 

• Fluke TiX500 320x240 pixels, -20 °C..+650 °C
• Fluke TiX520 320x240 pixels, -20 °C..+850 °C
• Fluke TiX560 320x240 pixels, -20 °C..+1200 °C

 

• 2-canale izolate 200MHz
• Clasa de protectie CAT III 1000 V, CAT IV 600 V
• Multimetru digital dedicat cu 5000 de numărări la modele cu două canale
• Măsurători automate avansate, energie (Vpwm, VA, W, PF) ™ timp (mAs, V/s, w/s)
• Clasa de protectie IP-51 pentru praf şi lichide pentru a rezista in medii dificile
• Porturi USB izolate

 

• Interval de masurare a temperaturii : -10 °C si +250 °C
• Precizie: ±2°C sau ±2%
• Frecventa de captura a imaginii : 8 Hz
• Banda spectrala infrarosu : între 6,5 µm si 14 µm
• Câmp de vizualizare 20° X 20°
• Suport de stocare Card Micro SD de 4 GB

 

• hand operated hydraulic pressure pump
• designed to generate calibration pressures up to 10,000 psi/690 bar
• Variable size stroke adjustment, allows the user to vary the volume and pressure per stroke
• Integral pressure adjustment vernier knob for fine pressure adjustment
• Directly connection to pressure modules consolidates two separate pieces into one when performing pressure calibration and testing
• Two ¼ inch NPT pressure ports, one for reference (pressure module or gauge), one for UUT
• Improved priming
• Improved stroke limiting mechanism

 

• 0 to 1000 V DC/AC Voltage measure
• 0 to 1 A Current measure
• 0 to 20 mA, 4 to 24 mA Current source
• DMM and loop calibrator in one tool
• HART mode setting with loop power