Tester Instalatii Electrice 50V-1000V Fluke 1653B

Cod: Fluke 1653B


 

Brosura produs PDF, 0.18 Mb

Descriere

  • Test voltage: 50V, 250V, 500V, 1000V
  • Two measurements at once and a dual display
  • PEFC/PSC and loop impedance are measured and displayed in parallel, saves you more than 50% of test time compared to other loop testers.
  • Additional new high current loop mode
  • Faster measurements compared to loop tests with non-trip mode for RCD’s
  • Unique zero adapter for fast, always reliable and accurate test lead and mains cord compensation
  • Earth resistance
  • Fast voltage measurement between L-N, L-PE and N-PE using the mains cord. No need to change measurement connections
  • Earth Volt Touchpad detects raised earth voltages >50 V, indicating potential dangerous situations
  • Supplied with the SureGripâ„¢ test leads and clips which gives the user a comfortable, reliable grip
  • Rotary dial knob indicates clear which function is selected, all functionalities on one spot and no complex multi level menus
  • Large display with backlight, clear symbols and exceptionally wide viewing angle for easy and safe readings
  • PASS/FAIL indication for RCD test results
  • Variable RCD current mode for customized settings
  • Extended Memory

  • Rugged & lightweight Withstands a drop of 1 meter
 

Accesorii standard

  • 6 AA Cell batteries
  • C1600 Hard carrying case
  • Zero Adapter
  • Mains test cord
  • TL165X/STD Standard Test Lead Set
  • Padded carrying strap
  • Quick reference guide
  • TP165X Remote control probe and lead
  • Users manual on CD-ROM
 

Optiuni recomandate

  • ES165X Earth Spike Test Kit (Fluke 1653)
  • TP165X Remote Control Probe
  • DMS DMS Software
  • FlukeView Forms FlukeView Forms Software with cable
 

Alte produse FLUKE

CLESTE AMPERMETRIC CURENT TRUE-RMS 400A FLUKE 323

• 400 A ac current measurement
• 600 V ac and dc voltage measurement
• True-rms ac voltage and current for accurate measurements on non-linear signals
• Resistance measurement up to 40 k? with continuity detection

 

TETER PORTABIL MONOXID DE CARBON CO FLUKE CO-220

• Rugged case and electronics.
• Large LCD displays CO levels from 0 to 1000 ppm.
• Bright back-light allows easy screen viewing under dim lighting conditions.
• Beeper triggers with increasing frequency as CO levels rise.
• MAX Hold function stores and displays the maximum CO level.
• Automatic sensor zeroing and self-test sequence upon start-up.

 

CALIBRATOR MULTIFUNCTIONAL DE PROCES FLUKE 725

• 0 to 100 mV, 0 to 30 V DC Voltage measure
• 0 to 100mV, 0 to 10 V DC Voltage source / simulate
• 0 to 24 mA Current measure / source / simulate
• 0 to 3200 O Resistance measure / source / simulate
• 1 to 10 kHz Frequency measure / source / simulate
• RTDs, thermocouples measure / source / simulate
• pressure measure

 

FLUKE 125B 125B/S SCOPEMETER OSCILOSCOP PORTABIL 2X40MHZ

• 2-canale 40MHz
• Osciloscop digital cu intrare dublă şi multimetru
• Lătime de bandă a osciloscopului de 40 MHz sau 20 MHz
• Două multimetre digitale true-RMS cu limită de numărare de impulsuri 5000
• Măsurarea energiei (W, VA, VAR, PF, DPF, Hz)
• Tensiune, curent şi armonice de energie
• Adaptor WiFi optional conectat la port USB intern pentru transfer wireless de informatii către PC, laptop sau aplicatia mobilă Fluke Connect®*1

 

MULTIMETRU DIGITAL PORTABIL 3.5 DIGIT FLUKE 77IV

• 3.5 digit
• 6000 count resolution
• 0.3% basic accuracy
• Large display
• Backlight for work in dim areas

 

MEGOHMETRU DIGITAL MULTIMETRU IZOLATIE 50/ 1000V FLUKE 1507

• Insulation test range: 0.01 MO to 10 GO
• Insulation test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V

 

ANALIZOR DE PUTERE DE PRECIZIE FLUKE NORMA 4000

• 1 to 3 power phases
• Bandwidth from dc to 3 MHz / 10 MHz
• FFT analysis, vector diagram, and Digital Oscilloscope
• Voltage, current and power harmonics measured up to the 40th harmonic

 

TESTER TENSIUNE SI CONTINUITATE FLUKE T140

• Resistance measurement
• Backlight
• LED Bargraph
• Display: 3½ digit LCD
• Voltage test
• Optical and acoustical continuity test

 

KIT CALIBRARE PNEUMATICA PRESIUNI FLUKE 700PTPK

• Combine with any Fluke-700G Series Gauge, 1,000 psi (69 bar) or less, to make a complete pressure testing kit
• Generate pressure up to 600 psi, 40 bar with the 700PTP-1 test pump
• Connect the 700G Series gauge directly to the included PTP-1 hand pump
• Includes hoses and adapters for connecting to the pressure device to be tested
• Hard case protects pump and gauge and allows gauge to remain connected to the pump

 

PIROMETRU DIGITAL PORTABIL FLUKE 63

• Single point offset laser sighting
• Best accuracy in its class: + 1% of reading
• Holds temperature readings for 7 seconds
• Dual displays shows current and MAX measurements simultaneously
• Backlit display for poorly lit areas
• Wide temperature range from -30º to 500ºC (-20º to 932ºF)