Extech EMF300 Tester Scapari Micorunde

• Single phase, 3-phase/3-wire or 3-phase/4-wire systems
• Large backlighting LCD displays 35 parameters simultaneously (MW, kVAR, MVA, PF plus the voltage and current of the 3 phases)
• Displays Active Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Power Factor
• Current measurements to 1200A and Voltage measurements to 600V

 

• 7 ranges for wide low resistance measurements
• High resolution to 0.01mOhm
• 1999 count display with 0.8" digits
• 4-wire test cable with Kelvin clip connectors
• Automatic zero
• Built-in comparator for Hi/Lo/Go resistance testing or selection

 

• Tests for faulty wiring in 3-wire receptacles: Correct, Open Ground, Open Neutral, Open Hot, Hot/Ground Reverse, Hot/Neutral Reverse
• Lights indicate circuit condition
• Standard North American 3-prong plug

 

• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Compact 0.8" (22mm) jaw size accommodates conductors up to 300MCM and allows measurements in tight locations
• Unique Smart Auto Sense feature
• Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals
• Built-in Non-Contact Voltage (NCV) detector for quick detection of live voltage
• Inrush current measurement

 

• Wide range to 40,000Fc or 400,000 Lux with max resolution to 0.01 Fc/Lux
• Relative mode indicates change in light levels, peak mode captures highest reading
• Remote light sensor on 12" (30.5cm) coiled cable - expandable to 24" (61cm)
• Utilizes precision photo diode and color correction filter
• Large LCD display with analog bargraph
• Backlight for readings in low light levels
• Complete with 9V battery, light sensor with protective cover, protective holster, and soft case

 

• BR200: Video Borescope/Wireless Inspection Camera
• 17mm camera diameter and 3.5" Color TFT LCD Wireless Monitor
• Memory card for capturing images (JPEG) or video (AVI) for viewing on your PC
• Detachable wireless 3.5" color TFT LCD display
• Captured videos and images can be viewed on the wireless monitor or transferred to your PC via the microSD card or USB cable

 

• Monitor moisture in wood and other building materials
• Measure directly with the built-in moisture pins or use remote hand-press probe on hard surfaces
• Memory contains 8 wood groups with calibrations for approximately 170 species of wood
• Designed in a rugged double molded housing construction and is pocket sized for one-handed operation

 

• Triple LCD simultaneously displays 3 pressure channels
• Up to 5000psi with 4-20mA output
• 4-20mA input with readout in 9 units of measure
• Datalogger date/time stamps and stores readings on an SD card in Excel® format

 

• Measure white LED and Standard Lighting in Lux or Foot-Candle (Fc) units
• Built-in sensor with protective cover
• 4000 count LCD display
• Cosine and color corrected measurements
• Min/Max Average and Auto Power Off
• Complete with 2 AAA batteries, and pouch

 

• A bright flashing LED and loud pulsating beeper indicate local continuity
• Remote continuity with the use of the remote probe
• Flashing remote probe - two lead, bi-color (red/green) LED probe allows a single user to identify up to three wires or cables at a time
• Lightweight and pocketsized, clips on and hangs from the cable(s) under test without falling off
• Great for Electricians and Helpers, Cable TV and Audio System Installers, Alarm Technicians, Plumbers, HVAC Installers etc.