The CSC Series includes a handheld loop calibrator and temperature calibrator, both designed to meet the high-accuracy demands of modern sensors and transmitters.

The CSC101 loop calibrator features an easy-to-use user interface, a bright, high-resolution display, and advanced step and ramp functions. Its unique rotary knob with built-in ½push enter½ function is both convenient and highly intuitive. In addition, it features fuseless protective that shields the instrument from voltage overloads up to 250 VAC, and is powered for 40 hours by six AAA batteries.

The CSC201 temperature calibrator can calibrate 16 types of RTDs and 13 types of thermocouples, providing ohms, mV, and custom RTD curves. It also works with pulsed excitation transmitters and programmable logic controllers, and can even calibrate pressure when combined with an APM advanced pressure module.

CSC101
½ Measure Current to 24mA with ½ 0.01 % of reading accuracy
½ Measure Voltage to 30VDC with ½ 0.01 % of reading accuracy
½ 24VDC Loop Power Supply
½ User defined step and ramp functions

CSC201
½ Measure thermocouples to ½ 0.2°C
½ Measure RTDs to ½ 0.1°C
½ Source thermocouple and RTDs to ½ 0.015% of reading
½ Clear, easy-to-use function keys
½ All input and output connectors are placed away from the display and keyboard for best operation conditions

Alte produse AMETEK

AMETEK ASM SERIES PROCESS MULTI-SCANNER

• Automatic procedures reduce human error
• Dedicate one input channel to a reference sensor with accuracy to 0.026°C
• Uses True Ohm technology to eliminate EMF from cables, sockets, and sensors

AMETEK WT SERIES DIGITAL PRESSURE GAUGE

• 0.1 % of reading accuracy
• Batteries and digital communications are accessible from the front
• Rugged "Wally Box" gauge can withstand dropping and accidental over-pressurization

AMETEK XP2I-DP DIFFERENTIAL PRESSURE GAUGE

• Record 32 000 data points
• Battery-optimizing, Ultra Low Power (ULP) Mode
• Over an entire year of continuous recording time

AMETEK 30 SERIES PRESSURE CALIBRATOR

• Indicates milliamps to calibrate transmitters
• Ultra compact and light
• Very easy to learn and use

AMETEK ETC EASY TEMPERATURE CALIBRATOR

• Accuracy to ½ 0.5°C and Stability to ½ 0.05°C
• Time saving fast cooling and heating times
• Easy-to-read multi-information display

AMETEK DTI050 TEMPERATURE INDICATOR

• Wide selection of sensors (straight, 90°, cabled, etc.) to fit your application
• Useful features like hold, and min / max
• Power with a single 9V battery, or external 9V supply

AMETEK PTC PROFESSIONAL TEMPERATURE CALIBRATOR

• Temperature range from -90 to 660°C (-130 to 1220°F) with 5 models
• Accuracy to ½ 0.06°C and Stability to ½ 0.01°C
• Clean Dry block calibrator
• Time saving fast cooling and heating times (350° in only 7 minutes)

AMETEK RTC REFERENCE TEMPERATURE CALIBRATOR

• Contamination free calibration of clamp sensors
• ½Plug and Play½ intelligent reference sensors
• Easy-to-read color display with User-friendly navigation
• Lightweight and easy to carry

AMETEK MACAL LOOP CALIBRATOR

• Source and Measure current to 24 mA with ½ 0.05% of full scale
• Measure voltage from 0 to 45 VDC with ½ 0.5 VDC
• 200 hours of life using 4 x AA batteries

AMETEK DTI-1000 TEMPERATURE INDICATOR

• One year accuracy to ½ 0.004°C
• System accuracy with STS Series temperature sensors to ½ 0.03°C
• Wide Temperature Range of -200 to 750°C (-328 to 1382°F)
• Resolution to 0.001°C