The RCDT300 series of residual current device testers are innovative instruments that combine rugged construction with intuitive operation. Even if they are inadvertently connected to a live three-phase supply, Megger’s RCDT300 range remain undamaged and present no safety hazard to you.

Available in three models, the RCDT300 series are compact and easy to use. Their rubber overmoulding gives them additional protection, plus they come with a built-in display cover. All models in the range are water and dust resistant with an IP54 rating.

There are three models in the range:

RCDT310: suitable for use on supplies between 100 V and 280 V, and offers 0.5I, I and 5I tests, with provision for tests starting at 0 ° or 180 ° of the supply waveform, as well as for DC tests. It also has facilities for testing standard and selective RCDs and covers current ranges from 30 mA to 500 mA. When connected to a live supply, it defaults to voltmeter mode.

RCDT320: covers a wider supply voltage range of 50 V to 280 V, allowing use with centre-tapped 110 V supplies. It incorporates ramp testing, for RCD tripping current measurement, and the unique Megger auto sequence test feature, which saves time by allowing the tester to conduct all RCD tests and store the results while the operator stands by the RCD, resetting it as appropriate.

RCDT330: has an extended operating current range to cover 10 mA to 1000 mA devices, and the ability to measure AC supply voltage and frequency is added. The large LCD screen displays test results and is backlit in this model, making it easier to use in locations with low ambient light levels.

The RCDT330 additionally offers the facility to save test results to internal memory. Over 1000 result can be saved on site and downloaded to a computer when convenient. Data is stored in non-volatile memory, being retained when the instrument is switched off or batteries are exhausted.

Find out about FormFiller, a FREE certification for BS7671 Electrical compliance package by clicking here.

All models in the range comply fully with the requirements of IEC61010-1 for Cat III 300 V applications and are supplied complete with appropriate test leads and a calibration certificate.

Standard accessories

Description Order Code

RCDT310 RCD Tester

30, 100, 300, 500 mA RCDT310-EN-BS

RCDT320 RCD Tester

10, 30, 100, 300, 500,1000 mA RCDT320-EN-BS

RCDT330 RCD Tester

10, 30, 100, 300, 500,1000 mA RCDT330-EN-BS

Included Accessories

Mains plug test lead (BS1363) 6231-601

2-wire test lead with prods and clips (not RCDT310) 1001-976

AUSTRALIA

RCDT310 RCD Tester

30, 100, 300, 500 mA RCDT310-EN-AU

RCDT320 RCD Tester

10, 30, 100, 300, 500,1000 mA RCDT320-EN-AU

RCDT330 RCD Tester

10, 30, 100, 300, 500,1000 mA RCDT330-EN-AU

Included Accessories

Mains plug test lead (AS/NZS 3112) 1005-080

2-wire test lead with prods and clips (not RCDT310) 1014-294

Description Order Code

EUROPE

RCDT310 RCD Tester

30, 100, 300,500 mA RCDT310-EN-SC

RCDT320 RCD Tester

10, 30, 100, 300, 500,1000 mA RCDT320-EN-SC

RCDT330 RCD Tester

10, 30, 100, 300, 500,1000 mA RCDT330-EN-SC

Included Accessories

Schuko plug test lead (CEE 7/7) 1005-078

2-wire test lead with prods and clips (not RCDT310) 1001-976

Optional Accessories for all RCDT’s

2-wire test lead with prods and clips 1014-294

Fused 2-wire test lead with prods and clips 1014-297

Recommended options

More products MEGGER

MEGGER S1-568/2 EXPERT 5000V 5KV INSULATION RESISTANCE MEGOHMMETER

• Reliable results in noisy substations
• Accurate testing with RE>Act™
• Remote control for safer, easier testing
• PI Predictor™ cuts test time in half
• Full diagnostic suite with PDC capability

CIRCUIT BREAKER TEST SET MEGGER ½ CB-845

• Digital memory ammeter
• Digital, multirange timer
• Lightweight and portable
• High-current output
• Solid-state output initiate circuitry

MEGGER BITE5 BATTERY TESTER

•

MEGGER DLRO10HD 10A MICROHMMETER LOW RESISTANCE MEASUREMENTS

• High or low output power selection for condition diagnosis
• Rechargeable battery or line power supply, continuous operation, even with dead battery
• 10 A for 60 seconds, less time waiting to cool, great for charging inductance
• High input protection to 600 V, inadvertent connection to line or UPS voltage will not blow a fuse
• Heavy duty case: IP 65 lid closed, IP54 operational (battery operation only)
• Rotary switch selects one of five test modes, including auto start on connection, giving ease of use

MEGGER - B10E

• Reliable and stable a.c. and d.c. power supply for circuit breaker testing
• Continuously variable 24-250 V AC or DC output
• Separate outputs for close coil, trip coil and spring charging motor voltage
• Direct triggering for minimum trip voltage testing

MEGGER SMRT33 THREE PHASE RELAY TESTER

• Small, rugged, lightweight and powerful
• Operate with or without a computer
• Intuitive manual operation with Smart Touch View Interface
• High current, high power output - (45 Amps/300 VA rms) per phase
• Network interface provides IEC 61850 test capabilities
• Fully automated testing using AVTS software

MEGGER TTRU3 THREE-PHASE TRANSFORMER TURN RATIO TESTER

• Guaranteed accuracy ±0.05% from -20°C to +50°C
• 3Ø test voltage - up to 250V
• 3Ø step up ratio (patented)
• Phase shifting & zig-zag transformers tested
• easily and accurately
• Smallest/lightest 3Ø test set on the market
• Fast 3Ø tests - less than 10 seconds

MEGGER TTR25 TRANSFORMER TURNS RATIO METER, EXCITATION CURRENT, POLARITY

• Fully automatic; fast; easy-to-use; robust; lightweight
• Battery powered
• Tests turns ratio, excitation current, and polarity
• Simple, one-button operation
• Quick-start guide on front panel
• Operator-selectable languages

HIGHLY PORTABLE MICRO-OHMMETER WITH DUALGROUND SAFETY MEGGER - DLRO100E, DLRO100X AND DLRO100H

• CAT IV 600 V for safe operation
• Light, 100 A, battery powered unit for portability
• High noise immunity for stable readings
• Smooth DC output for circuit breaker testing

MEGGER DELTA4110 INSULATION POWER & DISSIPATION FACTOR TEST SET DELTA4000

• fully automatic 12 kV insulation power factor / dissipation factor (tan delta) test set
• Voltage: 25 V to 12 kV, 1 V resolution
• Current : 0 to 5 Amps, 0.1 µA maximum resolution
• Capacitance: 0 to 100 µF, 0.01 pF maximum resolution
• Inductance: 6 H to 10 MH, 0.1 mH maximum resolution
• Power factor PF : 0-100% (0-1), 0.001% maximum resolution
• Dissipation factor DF : 0-100 (0-10,000%), 0.001% maximum resolution
• Watt Loss: 0 to 2 kW
• Automatic and manual operation
• Accurate and repeatable measurement results with high noise suppression
• Lightweight, rugged two-piece design