Hand-Held Micro-Ohmmeter Megger DLRO-H200

Code: DLROH200 DLRO-H200


 

Datasheet PDF, 0.66 Mb

Description

The DLRO-H200 is designed to measure the resistance of circuit breaker contacts, bus-bar joints and other high-current links. This product is designed with safety, ease of use and versatility in mind. This Micro-ohmmeter can be used anywhere to measure a low resistance value with high accuracy.

 

With DLRO-H200 it is possible to make measurements according to the DualGround method. This means that the test object will be grounded on both sides throughout the test giving a safer, faster and easier workflow.

 

Ruggedness and light weight make the handheld DLRO-H200 very suitable for field work, in substations and similar locations. The unit comes with a strong rubber holster that makes it extra durable. The DLRO-H200 is designed to carry out a full day of testing without recharge. It can store 190 test values and transfer test data to a PC via Bluetooth. The Bluetooth feature can also be used in conjunction with the wireless headset (supplied) to provide an audible pass/fail signal against user adjustable limits as tests are performed.

 

DLRO-H200 Micro-ohmmeters are supplied as standard with a copy of the PowerDB Lite software package. This intuitive software offers powerful features for storing, analyzing and archiving test results, and it supports reporting a wide range of industry standard formats. It also makes it easy to integrate results from the DLRO-H200 with results from other instruments to produce uniform reports.

 

Features:

  • Bluetooth headset for audible pass/fail testing against adjustable limits
  • Up to 240 Amps
  • Battery supplied
  • Lightweight 1 kg
  • Safe test DualGround
  • Auto range: 1 uOhm to 1000 mOhm
  • Bluetooth® PC communication
  • Complies with IEEE and IEC standards
  • PowerDB Lite included for Data Management and Collection
 

More products MEGGER

MEGGRE TTRU3 THREE-PHASE TRANSFORMER TURN RATIO TESTER

• Guaranteed accuracy ±0.05% from -20°C to +50°C
• 3Ø test voltage - up to 250V
• 3Ø step up ratio (patented)
• Phase shifting & zig-zag transformers tested
• easily and accurately
• Smallest/lightest 3Ø test set on the market
• Fast 3Ø tests - less than 10 seconds

 

MEGGER OTS60AF OTS80AF OTS100AF OIL BREAKDOWN TESTER 60KV 80KV 100KV

• Test voltages : 60 kV, 80 kV and 100 kV
• Laboratory instruments for measuring insulating oil breakdown voltage
• Lock in precision - oil vessel with lockable adjustment
• Bright 3.5" colour display
• Suitable for mineral, ester and silicon oils
• Trip detection circuit with direct measurement of voltage and current
• Ultra fast (< 10 µs) HV switch off time

 

MEGGER IDAX-300 IDAX-350 INSULATION DIAGNOSTIC ANALYZER, TAN DELTA, POWER FACTOR

• Automated measurement and analysis of moisture content, tan delta/power factor and oil conductivity
• Individual temperature correction (ITC) of tan delta/power factor and oil conductivity
• 40% faster measurements with the new IDAX 5.0 SW
• Reliable measurements in high-interference environments
• Multi-function test set for transformer measurements

 

STATIC / DYNAMIC RESISTANCE MEASUREMENT ACCESSORY FOR TM SERIES MEGGER - SDRM202

• Enables resistance measurement on circuit breakers
• Small and light weight
• A number of operations can be run with short waiting intervals

 

MEGGER TDR2000/2P DUAL CHANNEL CABLE REFLECTOMETER FAULT LOCATOR

• TDR20000/2P can perform single or dual channel measurements on a wide range of metallic cables
• dead or Live cables to CATIII 300V Phase to earth or 415V phase to phase can be tested.

 

BATTERY GROUND FAULT LOCATOR MEGGER - BGL

• Ground faults in ungrounded dc battery systems easily located
• Operates in high electrical noise environment
• Simplifies fault tracing by identifying fault characteristic (resistive and capacitive) magnitudes

 

MEGGER SVERKER 650 PROGRAMMA SINGLE PHASE RELAY TESTER

• Designed for rugged field use
• 0 to 100 Amp output current
• Suitable for testing many different types of relays such as power, voltage and current
• Easy to operate

 

MEGGER TPT420 VOLTAGE TESTER CATIV 1000V

• CAT IV/1000 V
• IP64 Rated
• 12 to 1000 V AC
• 12 to 1500 V DC
• Continuity test function with visual and acoustic indication
• Voltage indication with no batteries
• Single-pole voltage test
• Phase rotation indication
• Integrated torch light

 

MEGGER S1-1568/2 EXPERT 15KV INSULATION RESISTANCE MEGOHMMETER

• Reliable results in noisy substations
• Accurate testing with RE>Act™
• Remote control for safer, easier testing
• PI Predictor™ cuts test time in half
• Full diagnostic suite with PDC capability

 

DIGITAL CLAMP METER MEGGER - DCM310 AND DCM320

• Option of current only , DCM310 or multimeter, DCM320 models
• Measures up to 400 A a.c. with low current ranges for improved resolution
• 600 V a.c./d.c. DCM320
• 20 MO Resistance DCM320