• Automated measurement and analysis of moisture content, tan delta/power factor and oil conductivity
• Individual temperature correction (ITC) of tan delta/power factor and oil conductivity
• 40% faster measurements with the new IDAX 5.0 SW
• Reliable measurements in high-interference environments
• Multi-function test set for transformer measurements

IDAX300 is a very compact instrument and is used together with an external computer. The IDAX350 has a built-in computer but can also be used with an external computer.
IDAX300 and IDAX350 provide an accurate and reliable condition assessment of insulation in transformers, bushings, generators and cables. The IDAX system maximizes the outcome of maintenance activities allowing for load and service life optimization.
IDAX300 and IDAX350 are smaller, lighter and faster than their predecessor IDA200 and IDAX206. It maintains better accuracy and ability to provide reliable data using true AC DFR (Dielectric Frequency Response), also known as FDS (Frequency Domain Spectroscopy), for reliable test results in high interference environments. The state-of-the-art software makes testing both easier and faster, allowing transformer moisture and oil assessment in about 22 minutes (20°C).

Standard accessories

IDAX 300 AG-19090

IDAX 300S AG-19092

IDAX 350 With internal computer AG-19192

Included accessories

Mains cable

Ground cable 5 m (16 ft), GC-30060

Generator cable 18 m (60 ft), GC-30312

Measurement cable, red 18 m (60 ft), GC-30322

Measurement cable, blue 18 m (60 ft), GC-30332

USB cable, Windows software, Transport case

Recommended options

Optional accessories

IDAX calibration box CAL 300 AG-90010

IDAX demo box IDB 300 AG-90020

2nd channel option (factory upgrade to IDAX 300S) AG-90200

Generator cable, 9 m (30 ft) GC-30310

Measurement cable, 9 m (30 ft), red GC-30320

Measurement cable, 9 m (30 ft), blue GC-30330

Accessory kit:

mini bushing tap connectors (4 pcs)

hot collar straps (3 pcs)

temperature and humidity meter

.75" bushing tap connector

1" bushing tap connector

"J" probe bushing tap connector

1 m (3 ft) non-insulating shorting leads (3 pcs)

2 m (6 ft) non-insulating shorting leads (3 pcs) AG-90100

More products MEGGER

MEGGER DLRO600 DUCTER MICRO-OHMMETER 600A

• Small and weighs less than 33 lbs (15 kg)
• Test currents from 10 A to 600 A dc
• 0.1 µohms best resolution
• On board memory for up to 300 test results and notes
• RS232 port to download stored results or for real time output to a printer
• Supplied complete with 16.4 ft (5 m) test leads and download software

VACUUM INTERRUPTER TESTER MEGGER - VIDAR

• Tests the integrity of vacuum interrupters quickly, safely and easily
• User defined voltage selection
• Extensive voltage range
• Easy to operate. Follows ANSI/IEEE standardized DC test methods.
• Lightweight and portable

MEGGER MFT-X1 MULTIFUNCTION LOW VOLTAGE ELECTRICAL INSTALLATION TESTER

• Patented Confidence Meter™ for True Loop™ testing
• Easy certificate generation and reporting
• User upgradeable operating system
• Intuitive interface for ease of use
• Comprehensive EV Testing Capability

MEGGER MIT1525/2 15KV ADVANCED INSULATION RESISTANCE MEGOHMMETER

• Diagnostic testing with full test suite
• PI Predictor™ cuts test time in half
• Accurate testing with RE>Act™
• Built-in storage and easy data export
• Designed for safe testing in the field

MEGGER SMRT1 SINGLE PHASE RELAY TESTER

• Small, rugged, lightweight and powerful
• Operate with or without a computer
• Intuitive manual operation with Smart Touch View Interface
• High current, high power (75 Amps/400 VA rms)
• Network interface provides IEC 61850 test capabilities
• Fully automated testing using AVTS software

MEGGER - MS2A CIRCUIT BREAKER AND OVERCURRENT RELAY TEST SET

• Light Weight, Portable Primary Injection Test Instrument
• Overcurrent Relay Testing
• Ground Fault Performance Testing for NEC 230.95
• Circuit Breaker Testing

UNIVERSAL CIRCUIT BREAKER TEST SETS MEGGER PS-9130 AND PS-9160

• Proven power train
• Rugged instrumentation and controls
• Direct connection of draw-out type breakers
• Integral clock/calendar
• Easy-to-read display

MEGGER DET4 DET4T2 DET4TD2 DET4TR2 DET4TC2 DET4TCR2 EARTH GROUND TESTER

• 2, 3 and 4 point testing
• Stakeless (clamp-on) testing capability
• ART (Attached Rod Technique) capability
• Multiple, user selectable test frequencies
• Resistance measurement range to 200 kO
• IP54 rated
• Warning indicators prevent test failure
• Simple one button operation
• Included leads, stakes, calibration certificate and rugged carry case

MEGGER VLOC3-PRO CABLE UTILITY TRACE LOCATOR

• Color-coded EM distortion warnings
• Offset locate modes - Vector and Plan View
• Cloud-based data warehousing
• Internal data logging
• Optional Bluetooth connectivity

MEGGER MTO210 TRANSFORMER WINDING OHMMETER

• Direct 2-channel digital reading (1 µO to 2000 O)
• DC test current up to 10 A maximum
• 0.25% measurement accuracy
• Integrated demagnetization feature
• Tests operation of on-load tap-changers
• Very fast auto safety discharge circuit