The CB-845 test set is a high-current circuit breaker test set consisting of a control unit that incorporates the latest in solid-state metering, control technology and a high-current output unit.

The lightweight, two-section design of Model CB-845 enables the user to easily transport the unit into areas previously inaccessible to high-current test equipment such as elevated or subsurface load centers, shipboard power panels, elevator machinery rooms and other isolated locations.

Features:

Digital memory ammeter
Digital, multirange timer
Lightweight and portable
High-current output
Solid-state output initiate circuitry

More products MEGGER

MEGGER TDR1000/3P TDR CABLE FAULT LOCATOR

• TDR1000/3P is suitable for use on both dead or live cables
• Simple operation
• AUTO set up for instant use
• Ultra fast pulse for near end fault identification
• Trace HOLD feature to allow comparison between cables
• IP54 rating offers real life working
• No blocking filters require
• Supplied with fused test leads

EARTH LEAKAGE CLAMPMETER MEGGER - DCM300E

• 0.01 mA resolution
• EMC and IEC61010-2-032 compliance
• 30 mA, 300 mA, 30 A and 300 A range

MEGGER DELTA4310 INSULATION POWER & DISSIPATION FACTOR TEST SET DELTA 4310

• fully automatic 12 kV insulation power factor / dissipation factor (tan delta) test set
• Voltage: 25 V to 12 kV, 1 V resolution
• Current : 0 to 5 Amps, 0.1 µA maximum resolution
• Capacitance: 0 to 100 µF, 0.01 pF maximum resolution
• Inductance: 6 H to 10 MH, 0.1 mH maximum resolution
• Power factor PF : 0-100% (0-1), 0.001% maximum resolution
• Dissipation factor DF : 0-100 (0-10,000%), 0.001% maximum resolution
• Watt Loss: 0 to 2 kW
• Automatic and manual operation
• Accurate and repeatable measurement results with high noise suppression
• Lightweight, rugged two-piece design

MEGGER DET4 DET4T2 DET4TD2 DET4TR2 DET4TC2 DET4TCR2 EARTH GROUND TESTER

• 2, 3 and 4 point testing
• Stakeless (clamp-on) testing capability
• ART (Attached Rod Technique) capability
• Multiple, user selectable test frequencies
• Resistance measurement range to 200 kO
• IP54 rated
• Warning indicators prevent test failure
• Simple one button operation
• Included leads, stakes, calibration certificate and rugged carry case

MEGGER S1-1568/2 EXPERT 15KV INSULATION RESISTANCE MEGOHMMETER

• Reliable results in noisy substations
• Accurate testing with RE>Act™
• Remote control for safer, easier testing
• PI Predictor™ cuts test time in half
• Full diagnostic suite with PDC capability

MEGGER OTS60PB OTS80PB OIL BREAKDOWN TESTER 60KV 80KV

• portable 60 kV and 80 kV oil test sets
• Lightest - miniumum weight 16 kg
• Lock in precision - oil vessel with lockable adjustment
• Bright 3.5 inch colour display visable out doors
• Suitable for mineral, ester and silicon oils
• Trip detection circuit with direct measure ment of voltage and current
• Ultra fast (<10 µs) HV switch off time

MEGGER DLRO10X RESISTANCE OHMMETER DLRO 10 DLRO 10X 6111-428 6111-429

• up to 10A current
• Accurate results in under three seconds
• Auto current reversal cancels standing emfs
• Fuse protected to 600 V
• NiMH battery reduces weight
• 250 mW power limit (with optional override) to avoid heating the test sample

MEGGER MIT200 MIT210 MIT220 MIT230 INSULATION CONTINUITY TESTER

• Pocket-sized insulation and continuity testers - MIT210, MIT220, MIT230
• Insulation testing to 1000 MΩ
• Continuity testing at 200 mA down to 0.01 Ω
• Live circuit warning (voltage display) and test inhibit
• Digital/analogue display

MEGGRE TTRU3 THREE-PHASE TRANSFORMER TURN RATIO TESTER

• Guaranteed accuracy ±0.05% from -20°C to +50°C
• 3Ø test voltage - up to 250V
• 3Ø step up ratio (patented)
• Phase shifting & zig-zag transformers tested
• easily and accurately
• Smallest/lightest 3Ø test set on the market
• Fast 3Ø tests - less than 10 seconds

IRRADIANCE METER MEGGER - PVM210

• Optimal incident angle and positioning of solar panels
• Measurement of solar power for panel short circuit calculation
• 33/4 digit LCD display with 1999 W/m2 range
• Single handed use