Used as level and slope meter
Aluminum frame
Magnetic bottom
The display flips over when the bottom faces up
The backlight is on automatically when in use, and automatically off in 15 seconds after use
The sea level is permanently set inside the chip, zero setting is not needed when battery is replaced
Buttons: ON/OFF, ZERO, absolute and incremental measurement
One AAA battery, automatic power off in 5 minutes

Code: 2170-1

Range: 4x90°

Accuracy: at 0° and 90°: ±0.1°; at others: ±0.2°

Resolution: 0.1° (=1.745mm/m)

Bluetooth: no

Video:

Recommended options

More products INSIZE

MINI DIGITAL DEPTH GAUGE 1145-25A

• Non waterproof
• Measure depth of small groove and hole, also measure depth of tire tread
• Buttons: on/off, zero, mm/inch

MOTORIZED DIGITAL ROCKWELL HARDNESS TESTER HDT-RT151

• Comply with test standards ISO 6508, ASTM E18, JIS Z 2245
• Implement ISO, ASTM, GB scale conversion standards
• Electronic loading test force, with high accuracy and stable measurement values

DIGITAL CHAMFER GAUGE 1180-6

• Non waterproof
• Measure 15º/20º/30º/45º/60º chamfer dimension
• Buttons: on/off, zero, mm/inch

ISU-200D ULTRASONIC THICKNESS GAUGE

• With zero calibration and two-point calibration function, can automatically correct the system error
• Measure method: single point, scanning, deviation
• Measures steel, cast iron, aluminum, copper, plastics, ceramics, glass, fiberglass, etc

DIGITAL THICKNESS GAUGE 2871-10

• Keep preset data in memory after restart
• CR2032 battery, automatic power off (time is adjustable)
• Data output

OUTSIDE DIAMETER MEASURING INSTRUMENT 2716-60

• The frame is made of aluminum magnesium alloy with light weight and high strength
• Optional accessory: 0.01mm or 0.001mm digital/dial indicators

WIRELESS DIGITAL MEASURING TAPE + LASER DISTANCE METER 9563-C40

•

DIGITAL ULTRASONIC FLAW DETECTOR UFD-B450

• Full plastic housing with tempered glass panel, extremely hard, wear-resistant and scratch-resistant
• Full-digital multi-color high resolution (640×480 pixels) TFT LCD display
• The operation interface style can be selected according to the working environment, and the brightness of LCD can be set freely

DIAL INDICATOR STAND FOR 0.001MM DIAL AND TEST INDICATORS 6230-60

• Non-magnetic and hardened base
• Suitable for granite surface plates or cast iron surface plates
• For 0.001mm and 0.01mm dial and test indicators

AUTOMATIC VISION INSPECTION MACHINE AVIM

• For testing fasteners, mobile phone parts, plastical products, electronic components and special-shaped hardware, etc.