The GPM-8212 is a bench-top power meter suitable for middle- to high-end application. Performance and functionality are maintained at the highest level as in maximum 9999 CT/PT ratio, high immunity to external noise, and true RMS voltage/current/power. Extra attention is paid to simplify setup and operation. The large 0.56" display shows all three units, Wattage/Voltage/Current, either in PF or Hz, simultaneously. PC connection through RS-232C or RS-485 interface adds automatic calibration feature providing minimum error factor and data/control interface for automated test systems.

Features:

Simultaneous Display of W, A, V ( PF or Hz )
True RMS V, A, W
Auto Calibration Via Computer
Max. / Min. / Hold Function
High Immunity to External Noise
CT Ratio (1 ~ 9999)
PT Ratio (1 ~ 9999)

More products GW INSTEK

GOODWILL INSTEK APS-7000E SERIES

• Only 88mm(2U) case height
• Measurement function comprises Voltage, Current, Power, Current(peak), Frequency, Power Factor
• 10 sets of the Test mode simulate power transient output
• 10 sets of Preset allow users to store ten settings

GOODWILL INSTEK PEL-3000 SERIES

• Commands are compatible with Kikusui PLZ-4W model.
• Dynamic(Switching) Function:0.0166Hz ~20kHz
• Soft Start Function:Off / On(1~200ms, Res:1ms)
• Adjustable OCP / OVP / OPP / UVP Setting
• Short Circuit Function

GOODWILL INSTEK GFC-8270H & GFC-8131H

• Frequency and Period Measurement
• High Resolution at Both High and Low Frequency
• 0.01Hz~2.7GHz Frequency Range(GFC-8270H)
• 0.01Hz~1.3GHz Frequency Range(GFC-8131H)
• 10mV rms High Sensitivity

GOODWILL INSTEK GPR-H SERIES

• 0.01% High Regulation
• Constant Voltage and Constant Current Operation
• Internal Select for Continuous or Dynamic Load
• Low Ripple and Noise

GOODWILL INSTEK GLC-9000 LEAKAGE TOUCH CURRENT TESTER

• Touch Panel with Color LCD Display
• 9 Different Measurement Network to Simulate
• the Resistance of Human Body
• 8 Different Types of Leakage current for Medical
• & General Electrical Equipment
• Various Leakage Current Measuring Mode:DC/AC/AC+DC/AC Peak
• Upper & Lower Limitation for PASS/FAIL Judgment
• Meter Mode with SELV/CONV Function
• 50 Preset Test Conditions Conform to IEC 60990;
• 30 Sets Memories for Customer Defined
• Various Standard Interfaces RS232/GPIB/USB Host & Device/EXT I/O

GOODWILL INSTEK GUT-6600A

• Easy-Operating Tester, Particularly be Designed for the Digital IC
• Supported Device:74/54/40/45 Serial, Drive 2xxx
• Small, Portable, Light and Power-Saving, Usable With Battery
• Average Search Time: 0.6 Second
• Display: 16 Characters in 1 Line LCD
• Test Pins: 14~24 Pins

GOODWILL INSTEK GPS-SERIES

• Constant Voltage and Constant Current Operation
• Remote Control for External Programmability
• Internal Select for Continuous or Dynamic Load
• Low Ripple and Noise

RF SPECTRUM ANALYZER 9KHZ..3GHZ GW INSTEK GSP-830

• Frequency Range : 9kHz ~ 3GHz
• Low Noise Floor(-117dBm@1GHz, 3k RBW)
• Sequence Programming Functions
• ACPR, OCBW, Channel Power, N-dB and Phase Jitter Measurements
• 10 Markers with Delta Marker, Peak Functions
• AC/DC/Battery(Option)three modes of power supply
• USB/RS-232C/GPIB(Option) Interface
• 6.4" TFT Color LCD, Resolution: 640x480

GOODWILL INSTEK GAD-201G

• Automatic level & distortion measurements
• Auto or Hold function selectable
• 0.1% ~ 100% in 7 distortion measuring ranges
• 20Hz ~ 20kHz in 3 continuous ranges
• 400Hz, 1kHz, 10kHz 3 frequency spots
• 1mVrms ~ 300Vrms in 12 ACV measuring ranges

GOODWILL INSTEK APS-7000 SERIES

• Low Ripple & Noise
• Measurement and test functions include VOLT?CURR?PWR?SVA?IPK?IPKH?FREQ?PF?CF
• Support a small AC current measurement 2mA ~ 35A, Min. resolution 0.01mA(APS- 7050& APS-7100)
• Reverse Current Alarm Function