GOODWILL INSTEK GCT-9040

Code: GOODWILL INSTEK GCT-9040 GCT9040


 

Datasheet PDF, 2.03 Mb
   

Description

GW Instek rolls out40AAC ground bond tester - GCT-9040 to augment the existing safety tester product line and to replace the legacy model GCT-630. GCT-9040 provides the maximum AC test current of40Aand adopts the PWM design the same as other models to ensure test efficiency and reliability. Furthermore, large LCD display, 100 memory blocks from setting criteria, and programmable communications interface together deliver users with higher readability and convenience.

 

In addition to the standalone ground bond test operation, GCT-9040, with40AAC ground bond test capability, can also externally connect with GW Instek safety testers such as GPT-9800/9900/9900Aseries to augment users½ product test requirements by the all-in-one test platform. For instance, GPT-9802 (AC/DC withstanding tester), via external connection, can be expanded to a safety tester system with three testing functionalities.

 

Additionally, after the safety tester system has been assembled, not only the sequential test function for the original all-in-one models can be executed, but also the simultaneous output test can be conducted. The simultaneous output test allows two testers to simultaneously test DUT so as to shorten the overall test time. Whether the safety tester system executes sequential test or simultaneous output test, GCT-9040 will automatically obtain control over two testers, including activation control, final status indication light, and pin signal output from Digital I/O etc. to avoid confusion caused by each tester½s indication light.

 

Last but not least, GCT-9040, with respect to remote control and data retrieval, not only provides standard USB (optional GPIB) interface to control all functionalities but also controls connected safety testers (GPT-9800/9900/9900Aseries) via commands to read measurement results.

 

Features:

  • AC 40A Ground Bond Tester
  • Measuring Resistance from 1mO~650mO
  • Connect with the GPT-9800/9900 series to become a multifunctional test or simultaneous test system
  • 240x64 Ice Blue Dot Matrix LCD
  • Function Key for quick selecting
  • High intensity flash for Caution & Status indication
  • PWM switching amplifier to enhance the power efficiency and reliable testing
  • Max. 100 memory block for test condition setting.
  • Remote terminal on the front panel for ½start½ and ½stop½ remote active
  • Interface : USB device, Signal I/O and GPIB (optional)

 

 

More products GW INSTEK

GOODWILL INSTEK GUT-6000B

• Loop Test
• Auto-Search
• Self-Diagnosis
• Over-Load Protection

 

GOODWILL INSTEK GPT-9801 GPT-9802 GPT-9803 GPT-9804 DIELECTRIC WITHSTANDING TESTER

• 200VA AC Test Capacity
• 240x64 Ice Blue Dot matrix LCD
• Manual/Auto Mode
• Controllable Ramp-up Time
• True RMS Current Measurement
• High resolution: 1uA for measuring current, 2V for setting voltage
• Interface : RS-232C, USB device, Signal I/O and GPIB (optional)

 

GOODWILL INSTEK GVT-427B & GVT-417B

• 300½V Full Scale Sensitivity
• Measurement Frequency: 10Hz ~ 1MHz
• Measurement Amplitude: -70dB ~ +40dB in 12 Ranges
• Dual Channel (GVT-427B)
• CE Approved (GVT-417B)

 

GOODWILL INSTEK GDM-8351

• 120,000 counts, VFD display
• Dual measurement/Dual display
• The basic precision of DC voltage: 0.012%
• Selectable measurement speeds, the maximum: 320 Readings/s
• True RMS (AC,AC+DC) measurements

 

GOODWILL INSTEK GSB-01 / GSB-02

• Front & rear input connector design is suitable for the GPT-9800/9900/9900A series
• A maximum of 4 scanner boxes (32 CH) can be connected to one GPT-9800/9900/9900A series
• High-intensity LED for Channel, Status & Judgment indications

 

GOODWILL INSTEK PSB-2400L2

• Output Voltage Rating : 80V/800V
• Output Power Rating : 400W~800W
• Constant Power Output for Multi-Range(V&I)Operation
• Series and Parallel Operation(2 Units in Series or 4 Units in parallel Maximum)


GOODWILL INSTEK MFG-2000 SERIES

• Earth Ground Isolation Design Among I/O Terminals and Instrument Chassis
• Frequency Counter : 150MHz, 8 bits
• AM/FM/PM/ASK/FSK/PSK/SUM/PWM Modulation
• USB Host/USB Device/LAN (MFG-22XX only)
• 4.3 Inch TFT Color Display

 

GOODWILL INSTEK GPC-SERIES

• Auto Series and Parallel Operation
• Constant Voltage and Constant Current Operation
• Low Ripple and Noise
• Internal Select for Continuous or Dynamic Load

 

GOODWILL INSTEK PLR-SERIES

• Output Voltage Rating:20V / 36V / 60V
• Output Power:360W / 720W
• Low Ripple and Noise (0.5mVrms/ 10mArms)
• Fast transition recovery time(100us)
• Maximum 2 units in series connections or 3 units in parallel connections

 

GOODWILL INSTEK GLC-9000 LEAKAGE TOUCH CURRENT TESTER

• Touch Panel with Color LCD Display
• 9 Different Measurement Network to Simulate
• the Resistance of Human Body
• 8 Different Types of Leakage current for Medical
• & General Electrical Equipment
• Various Leakage Current Measuring Mode:DC/AC/AC+DC/AC Peak
• Upper & Lower Limitation for PASS/FAIL Judgment
• Meter Mode with SELV/CONV Function
• 50 Preset Test Conditions Conform to IEC 60990;
• 30 Sets Memories for Customer Defined
• Various Standard Interfaces RS232/GPIB/USB Host & Device/EXT I/O