GOODWILL INSTEK PLR-Series

Code: GOODWILL INSTEK PLR-Series


 

Datasheet PDF, 0.62 Mb
     

Description

GW Instek launches the new generation PLR series programmable switching D.C. power supply. The single power output ranges are 360W and 720W. The series comprises 6 models and the voltage ranges are 20V, 36V and 60V.  The PLR series is a hybrid circuit design which incorporates front stage switching and rear stage linear architectures. The unique advantages of this design benefit from the combination of both switching and linear structures. The front stage switching structure can effectively reduce size and weight, and the rear stage linear structure can maintain lower ripple voltage, lower ripple current, and faster transient response.  

 

Features:

  • Output Voltage Rating:20V / 36V / 60V
  • Output Power:360W / 720W
  • Low Ripple and Noise (0.5mVrms/ 10mArms)
  • Fast transition recovery time(100us)
  • Maximum 2 units in series connections or 3 units in parallel connections
  • Select the setting digits for voltage and current(coarse/ fine volume control)
  • Panel Lock Function
  • 3 set of preset function
  • Output off timer function(Range:1 min to 1000 hours & 59mins)
  • CC priority function(prevent overshoot & inrush current)
  • Sequence function of PC editing(Max.: 1000 steps/ Min. step period: 50ms)
  • Protection: OVP, UVP, OCP, remote sensing(Terminal open)
  • External Analog Control Function
  • PC Remote Interface (Standard):RS-232; (Optional) : GPIB / USB / LAN
  • CE Compliance
 

More products INSTEK

GOODWILL INSTEK GDM-8245

• Dual Display Indicate ACV and Hz,or DCV(ACV) and dBm
• Manual or Auto Ranging
• 0.03% DCV Accuracy
• ACV Measuring Frequency Up to 50kHz

 

GOODWILL INSTEK GOM-804 & GOM-805

• Fast measurement of 60 readings per second
• Four wire resistance measurement
• Temperature compensation measurement function
• Delayed measurement

 

GOODWILL INSTEK GAD-201G

• Automatic level & distortion measurements
• Auto or Hold function selectable
• 0.1% ~ 100% in 7 distortion measuring ranges
• 20Hz ~ 20kHz in 3 continuous ranges
• 400Hz, 1kHz, 10kHz 3 frequency spots
• 1mVrms ~ 300Vrms in 12 ACV measuring ranges

 

GOODWILL INSTEK PSB-2400L2

• Output Voltage Rating : 80V/800V
• Output Power Rating : 400W~800W
• Constant Power Output for Multi-Range(V&I)Operation
• Series and Parallel Operation(2 Units in Series or 4 Units in parallel Maximum)


GOODWILL INSTEK APS-7000E SERIES

• Only 88mm(2U) case height
• Measurement function comprises Voltage, Current, Power, Current(peak), Frequency, Power Factor
• 10 sets of the Test mode simulate power transient output
• 10 sets of Preset allow users to store ten settings

 

GOODWILL INSTEK GPE-X323

• Output ON/OFF
• Analog Control (Remote I/O) for Output ON / OFF
• Set View function for checking an original V / I setting during output on
• Key Lock Function

 

TOUCH PANEL OSCILLOSCOPE INSTEK GDS-200

• GDS-220 200MHz, 2-Channel, Full Touch Panel, Digital Oscilloscope
• GDS-210 100MHz, 2-Channel, Full Touch Panel, Digital Oscilloscope
• GDS-207 70MHz, 2-Channel, Full Touch Panel, Digital Oscilloscope

 

GOODWILL INSTEK GPT-9801 GPT-9802 GPT-9803 GPT-9804 DIELECTRIC WITHSTANDING TESTER

• 200VA AC Test Capacity
• 240x64 Ice Blue Dot matrix LCD
• Manual/Auto Mode
• Controllable Ramp-up Time
• True RMS Current Measurement
• High resolution: 1uA for measuring current, 2V for setting voltage
• Interface : RS-232C, USB device, Signal I/O and GPIB (optional)

 

DIGITAL OSCILLOSCOPES 2/4CH. 70/100/200/300MHZ INSTEK GDS-2000A

• GDS-2072A 70MHz ,2-channel ,Visual Persistence DSO
• GDS-2074A 70MHz ,4-channel ,Visual Persistence DSO
• GDS-2102A 100MHz ,2-channel ,Visual Persistence DSO
• GDS-2104A 100MHz ,4-channel ,Visual Persistence DSO
• GDS-2202A 200MHz ,2-channel ,Visual Persistence DSO
• GDS-2204A 200MHz ,4-channel ,Visual Persistence DSO
• GDS-2302A 300MHz ,2-channel ,Visual Persistence DSO
• GDS-2304A 300MHz ,4-channel ,Visual Persistence DSO

 

GOODWILL INSTEK GLC-9000 LEAKAGE TOUCH CURRENT TESTER

• Touch Panel with Color LCD Display
• 9 Different Measurement Network to Simulate
• the Resistance of Human Body
• 8 Different Types of Leakage current for Medical
• & General Electrical Equipment
• Various Leakage Current Measuring Mode:DC/AC/AC+DC/AC Peak
• Upper & Lower Limitation for PASS/FAIL Judgment
• Meter Mode with SELV/CONV Function
• 50 Preset Test Conditions Conform to IEC 60990;
• 30 Sets Memories for Customer Defined
• Various Standard Interfaces RS232/GPIB/USB Host & Device/EXT I/O