200VA AC Test Capacity
240x64 Ice Blue Dot matrix LCD
Manual/Auto Mode
Function Key for quick selecting
High intensity flash for Caution & Status indication
Safety INTERLOCK function
Zero Crossing Turn-on Operation
Controllable Ramp-up Time
True RMS Current Measurement
High resolution: 1uA for measuring current, 2V for setting voltage
PWM amplifier to enhance the power efficiency and reliable testing
Max. 100 memory block for test condition (step) setting. And each step can be named individually.
Remote terminal on the front panel for ½start½ and ½stop½ control
Interface : RS-232C, USB device, Signal I/O and GPIB (optional)

GPT-9804 AC 200VA AC/DC Withstanding Voltage/ Insulation Resistance / Ground Bond Tester

GPT-9803 AC 200VA AC/DC Withstanding Voltage/ Insulation Resistance Tester

GPT-9802 AC 200VA AC/DC Withstanding Voltage Tester

GPT-9801 AC 200VA AC Withstanding Voltage Tester

Standard accessories

Quick Start Guide x 1,

CD x1(completed user manual)

Power cord x 1,

Interlock key x 1,

Remote terminal male plug x 1,

Test lead GHT-114 x 1 for GPT-9803/9802/9801

Test lead GHT-114 x 1, GTL-115 x 1 for GPT-9804

Recommended options

Option

Opt.1 GPIB card

Optional Accessories

GHT-113 High Voltage Test Pistol

GHT-205 High Voltage Test Probe

GTL-232 RS232C Cable, 9-pin Female to 9-pin, null Modem for Computer

GTL-247 USB Cable, A-A type, approx. 1.8m

GTL-248 GPIB Cable, approx. 2m

GRA-402 RACK Adapter Panel (19½, 4U)

More products GW INSTEK

ANALOG OSCILLOSCOPE 2 X 200 MHZ GW INSTEK GOS-6200

• 200MHz Bandwidth, Delayed Sweep
• 2 analog channels
• Built-in 6 Digits Counter
• Cursor Readout with 7 Measurements

ANALOG OSCILLOSCOPE 2 X 100 MHZ GW INSTEK GOS-6112

• 100 MHz bandwidth, Delayed Sweep
• 2 analog channels
• Cursor Readout with 7 Measurements

GOODWILL INSTEK PSB-2400L2

• Output Voltage Rating : 80V/800V
• Output Power Rating : 400W~800W
• Constant Power Output for Multi-Range(V&I)Operation
• Series and Parallel Operation(2 Units in Series or 4 Units in parallel Maximum)

GOODWILL INSTEK APS-9000 SERIES

• Stable and Low-Distortion Output Waveforms
• Software Calibration to Ensure Accuracy
• Panel-Lock Function to Prevent Operation Error
• Frequency,Volt,Amp,Watt and Power Factor Display

DIGITAL OSCILLOSCOPE DUAL INDEPENDENT FLOATING ISOLATED CHANNELS 20MHZ INSTEK GDS-122

• 20MHz Bandwidth
• 100MS/s Real-Time Sampling Rate
• True RMS Multimeter: Volt, AMp, Ohm, Continuity, Diode
• Dual Independent Floating Isolated Channels
• Trigger Mode: Free Run, Single Shot, Edge, Video
• USB Interface
• 6 Hour Capacity Li-ion Rechargeable Battery
• 3.8" Color LCD, Resolution: 320 x 240
• Light Weight: 690g

GOODWILL INSTEK GFG-8200A SERIES

• Frequency Range: 0.3Hz ~ 3MHz (GFG-8215A/8216A/8217A/8219A)
• Frequency Range: 0.5Hz ~ 5MHz (GFG-8250A/8255A)
• Waveforms: Sine, Triangle, Square,Ramp, TTL and CMOS Output
• External Voltage Controlled Frequency (VCF) Function

ANALOG OSCILLOSCOPE 2 X 50 MHZ GW INSTEK GOS-6050

• 50 MHz bandwidth
• 2 analog channels
• 1mV/div ~ 20V/div

GOODWILL INSTEK GPM-8213

• Two data display modes
• Standard : two major measurement items + six secondary measurement items
• Simple : displaying test data of four different measurement items
• Met the requirement of IEC 62301 power measurement
• Voltage/ current test frequency bandwidth : DC~6kHz

GOODWILL INSTEK PSB-1000 SERIES

• Power on Configuration
• Internal Sense Control( Disable/ front panel/ rear panel)
• Voltage trigger function
• Output delay function

GOODWILL INSTEK GPS-SERIES

• Constant Voltage and Constant Current Operation
• Remote Control for External Programmability
• Internal Select for Continuous or Dynamic Load
• Low Ripple and Noise