GOODWILL INSTEK PSB-2000 Series

Code: GOODWILL INSTEK PSB-2000 Series


 

Datasheet PDF, 2.04 Mb
   

Description

The PSB-2000 series, which is a high power density, programmable and multi-range output DC power supply. There are six models in the series including one power booster unit. The PSB-2000 series has the output voltage of 0~80V and 0~800V, and the output power ranges of 0~400W and 0~800W. The multi-range output functionality facilitates flexible collocations of higher voltage and larger current under the rated power range. Both series and parallel connections can be applied to the PSB-2000 series to fulfill the requirements of higher power output range.

 

The PSB-2000 series provides three sets of preset function keys to memorize regularly used settings of voltage, current and power that users can recall rapidly. The sequence function, via RS232C, USB interface or optional GPIB interface, can connect with the computer to produce output power defined by sequence of a series of set voltage and current steps that are defined by the computer. This function is often used to establish a standard test procedure for the verification of the influence on DUTs done by the swiftly changing operating conditions.

 

The PSB-2000 series protects over voltage and over current. The power supply output function will be shut down to protect DUTs while the protection mechanism is triggered to function. When conducting battery charging operation, the Hi-W mode of thePSB-2000 series will prevent reverse current from damaging power supply. The PSB-2000 series provides analog control and analog monitor interfaces on the rear panel to control PSB-2000 output via the external voltage or to externally monitor voltage and current output status of power supply. PSB-2000 panel can be rotated 90 degree angle suitable for vertical or horizontal position to accommodate the ideal space utilization.

 

Features:

  • Output Voltage Rating : 80V/800V
  • Output Power Rating : 400W~800W
  • Constant Power Output for Multi-Range(V&I)Operation
  • Series and Parallel Operation(2 Units in Series or 4 Units in parallel Maximum)
  • Sequence function edited by PC will be controlled through power supply
  • optional interface
  • Standard Interafce: RS-232C / USB / Analog Control Interface
  • Optional Interface: GPIB

 

 

More products INSTEK

ANALOG OSCILLOSCOPE 2 X 100 MHZ GW INSTEK GOS-6103C

• 100 MHz bandwidth, Delayed Sweep
• 2 analog channels
• 10 Sets Memory for Front Panel Setting Save & Recall
• Built-In 6 digits Universal Counter
• Time Base Auto-range
• Cursor Readout with 7 Measurements

 

DIGITAL OSCILLOSCOPES 2/4CH. 150/250/350/500MHZ INSTEK GDS-3000

• GDS-3152 150MHz, 2 channel, 2.5GSa/s
• GDS-3154 150MHz, 4 channel, 5GSa/s
• GDS-3252 250MHz, 2 channel, 2.5GSa/s
• GDS-3254 250MHz, 4 channel, 5GSa/s
• GDS-3352 350MHz, 2 channel, 5GSa/s
• GDS-3354 350MHz, 4 channel, 5GSa/s
• GDS-3502 500MHz , 2 channel, 4GSa/s
• GDS-3504 500MHz , 4 Channel , 4GSa/s

 

GOODWILL INSTEK PSW-SERIES

• CV/CC Priority; Particularly Suitable for the Battery and LED Industry
• Adjustable Slew Rate
• Series Operation: Up to 2 units (30V, 80V, 160V models only)
• Parallel Operation: Up to 3 units

 

GOODWILL INSTEK AFG-303X SERIES

• Input/output signal ground independent of housing and signal ground between channels also insulated.
• Synchronized phase operates up to 6 units and 12 channels
• Pulse waveform parameters can be set independently for more precise timing
• Harmonic signal generator

 

GOODWILL INSTEK GPR-M SERIES

• Constant Voltage and Constant Current Operation
• Internal Select for Continuous or Dynamic Load
• Low Ripple and Noise
• Overload and Reverse Polarity Protection

 

GOODWILL INSTEK GFC-8270H & GFC-8131H

• Frequency and Period Measurement
• High Resolution at Both High and Low Frequency
• 0.01Hz~2.7GHz Frequency Range(GFC-8270H)
• 0.01Hz~1.3GHz Frequency Range(GFC-8131H)
• 10mV rms High Sensitivity

 


GOODWILL INSTEK LCR-900 SERIES

• Parallel/Series Testing Mode
• Sorting Mode for Quality Control
• 2Wire or 5Wire Measurement Available
• Data Hold and Zero Mode Supported

 

ANALOG OSCILLOSCOPE 2 X 50 MHZ GW INSTEK GOS-6050

• 50 MHz bandwidth
• 2 analog channels
• 1mV/div ~ 20V/div

 

GOODWILL INSTEK PEL-3000 SERIES

• Commands are compatible with Kikusui PLZ-4W model.
• Dynamic(Switching) Function:0.0166Hz ~20kHz
• Soft Start Function:Off / On(1~200ms, Res:1ms)
• Adjustable OCP / OVP / OPP / UVP Setting
• Short Circuit Function