The EX210T is a TrueRMS Digital Multimeter with IR. The meter auto ranges and has a 2000 count large LCD display. Measures AC/DC voltage and Current, Resistance and Temperature (IR). Its True RMS measurements make this meter more accurate and reliable when measuring distorted waveforms and its built in IR thermometer has a 4:1 distance to target ratio, visually aided by the built in laser pointer. This meter has a CAT III 600V safety rating and is complete with a year warranty, test leads and a 9V battery.

Features:

True RMS for better accuracy when measuring distorted waveforms
Built-in IR Thermometer with 4:1 distance to target ratio and laser pointer
2000 count large backlit dual LCD with easy-to read digits
Low current capability with resolution to 0.1µA
Input fuse protection
Max Hold, Data Hold and Auto power off
Complete with test leads and 9V battery

More products EXTECH

EXTECH 380580 BATTERY POWERED MILLIOHM METER

• Four terminal Kelvin measurements
• Over-temperature and over-voltage protection
• 5 ranges with 100µOhm max resolution
• Invalid test indicators prevent inaccurate measurements
• Built-in water resistant case with shoulder strap

EXTECH MO53 PINLESS MOISTURE METER

• Pinless moisture measurement depth to <0.75" (20mm)
• Measures Moisture up to 99.9% for Wood and 56.5% for other building materials
• Displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete, and mortar
• Audible Alert - Tone rate beeps faster as the moisture level increases

EXTECH EN100 11-IN-1 ENVIRONMENTAL METER

• Built-in sensors measure Air Velocity, Air Flow, Temperature, Humidity, Wet Bulb, Dew Point, Heat Index, Wind Chill, Barometric Pressure, Altitude, and Light
• Field replaceable low friction vane wheel improves air velocity accuracy
• Backlit LCD display (auto off after 5 seconds)
• Data Hold, Auto Power Off, Auto-rotating display depending on function
• Complete with built-in multiparameter sensors, wrist strap, and CR2032 battery

EXTECH ET15 RECEPTACLE TESTER

• Tests for faulty wiring in 3-wire receptacles: Correct, Open Ground, Open Neutral, Open Hot, Hot/Ground Reverse, Hot/Neutral Reverse
• Lights indicate circuit condition
• Standard North American 3-prong plug

EXTECH PRT200 NON-CONTACT PHASE SEQUENCE TESTER

• 75 to 1000VAC input voltage with 45 to 65Hz frequency range
• LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live
• Beeper sounds intermittently when correct phase is detected and continuously if phase is reversed
• Durable housing with back cover magnet for attachment to an AC distribution panel for easy measurement

EXTECH 380820 UNIVERSAL AC POWER SOURCE & AC POWER ANALYZER

• 99 memory locations for preset voltage and frequency output settings
• User-programmable Over Current Protection
• Programmable through the built-in RS-232 interface
• Data acquisition mode captures readings to your PC with a user-programmable sampling rate of 2 to 65,535 seconds
• Complete with AC power cord, RS-232 to USB cable and software

EXTECH 38387 600A AC CLAMP + MULTIMETER

• Measure AC Current, AC/DC Voltage and Resistance
• 1.25" (33mm) circular jaw opening for large cables (350MCM)
• Large 2000 count LCD display
• Data Hold freezes data in display
• Peak Hold captures in-rush currents
• Audible Continuity beeper

EXTECH MN30 TRUE RMS AUTOSENSING™ MULTIMETER + NCV

• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Unique smart AutoSensing feature
• Built-in Non-Contact Voltage (NCV) detector
• Convenient built-in LED Flashlight
• Audible Continuity tester

EXTECH SD750 3-CHANNEL PRESSURE DATALOGGER

• Triple LCD simultaneously displays 3 pressure channels
• Up to 5000psi with 4-20mA output
• 4-20mA input with readout in 9 units of measure
• Datalogger date/time stamps and stores readings on an SD card in Excel® format

EXTECH 412400: MULTIFUNCTION PROCESS CALIBRATOR

• Source 0 to 24mA with 0.01mA resolution
• Measure 0 to 50mA (0.1mA resolution)
• Select Type K, J, or T thermocouple for precision calibrations in °F/°C or mV
• Output 0 to 1999mV or 0 to 10.00V
• Measure 0 to 19.99V