The MO290 is an 8-in-1 meter that combines a Pin/Pinless Moisture Meter with a built-in InfraRed Thermometer. Additional measurements include: Temperature, Humidity, Grains per Pound, Dew Point, Vapor Pressure, and Condensation Point. Complete with pin moisture probe, 9-Volt battery, and case.

Features:

Measure Humidity, Air Temperature (with built-in probe) plus non-contact InfraRed Temperature
Pinless moisture sensor allows to monitor moisture in wood and other building materials with no surface damage
Remote pin-type probe (MO290-P) for contact moisture readings (3ft/0.9m cable length)
Select from multiple wood types and measurement ranges
Easy to read, large dual display with backlit feature
Simultaneously displays % moisture of wood or material being tested and Air Temperature, IR Temperature, or Humidity
Pinless measurement depth to 0.75" (19mm) below the surface
Non-Contact InfraRed Thermometer with 8:1 distance to spot ratio and 0.95 fixed emissivity
Built-in Humidity/Temperature probe measures Relative Humidity, Air Temperature plus Grains Per Pound (GPP), Dew Point (DP), and Vapor Pressure
Programmable high/low Moisture and Humidity alarms
Automatic calculation of differential Temperature (IR - DP) to determine condensation point
Min/Max and Data Hold, Auto Power Off
Complete with battery and pouch case

More products EXTECH

EXTECH 433201: MULTI-TYPE CALIBRATOR THERMOMETER

• One model for multiple thermocouple types with precision output displayed as mV or °C/°F
• Microprocessor assures maximum accuracy to 0.15% of reading over wide ranges
• High Accuracy Calibration function simulates precision thermocouple outputs for use in calibrating thermometers, transmitters,controllers or recorders.
• Complete with universal AC adaptor and AU/EU/UK/US plugs

EXTECH HD350 PITOT TUBE ANEMOMETER + DIFFERENTIAL MANOMETER

• Simultaneous display of Pressure, Air Velocity or Air Flow plus Temperature
• ±0.7252psi range
• 5 selectable units of pressure measurement
• Max/Min/Avg recording and Relative time stamp
• Data Hold and Auto power off functions

EXTECH PRT200 NON-CONTACT PHASE SEQUENCE TESTER

• 75 to 1000VAC input voltage with 45 to 65Hz frequency range
• LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live
• Beeper sounds intermittently when correct phase is detected and continuously if phase is reversed
• Durable housing with back cover magnet for attachment to an AC distribution panel for easy measurement

EXTECH EX530 11 FUNCTION HEAVY DUTY TRUE RMS INDUSTRIAL MULTIMETER

• True RMS DMM with 11 functions and 0.06% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Dual sensitivity frequency functions (electrical/electronic)
• 1000V input protection on all functions
• 20A max Current

EXTECH CT20 REMOTE & LOCAL CONTINUITY TESTER

• A bright flashing LED and loud pulsating beeper indicate local continuity
• Remote continuity with the use of the remote probe
• Flashing remote probe - two lead, bi-color (red/green) LED probe allows a single user to identify up to three wires or cables at a time
• Lightweight and pocketsized, clips on and hangs from the cable(s) under test without falling off
• Great for Electricians and Helpers, Cable TV and Audio System Installers, Alarm Technicians, Plumbers, HVAC Installers etc.

EXTECH EN150 11-IN-1 ENVIRONMENTAL METER WITH UV

• Built-in sensors measure Air Velocity, Air Flow, Temperature, Humidity, Wet Bulb, Dew Point, Heat Index, Wind Chill, Barometric Pressure, Altitude, and UV Light
• Field replaceable low friction vane wheel improves air velocity accuracy
• Backlit LCD display (auto off after 5 seconds)
• Data Hold, Auto Power Off
• Complete with built-in multiparameter sensors, wrist strap, and CR2032 battery

EXTECH EX810 1000A AC CLAMP METER WITH IR THERMOMETER

• Non-contact InfraRed Temperature measurements with laser pointer
• Peak hold captures inrush currents and Transients
• MultiMeter functions include AC/DC Voltage, AC Current, Resistance, Capacitance, Frequency, Diode, and Continuity
• 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
• 4000 count backlit display
• Autoranging with manual range button

EXTECH MO220 WOOD MOISTURE METER

• Monitor moisture in wood and other building materials
• Measure directly with the built-in moisture pins or use remote hand-press probe on hard surfaces
• Memory contains 8 wood groups with calibrations for approximately 170 species of wood
• Designed in a rugged double molded housing construction and is pocket sized for one-handed operation

EXTECH MN15A DIGITAL MINI MULTIMETER

• Large easy to read digital display
• AC/DC Voltage, DC Current, Resistance, Continuity, Diode Test and Type K Temperature
• 1.5V and 9V Battery test function
• Complete with 9V battery, general purpose Type K bead wire probe and test leads

EXTECH LT40 LED LIGHT METER

• Measure white LED and Standard Lighting in Lux or Foot-Candle (Fc) units
• Built-in sensor with protective cover
• 4000 count LCD display
• Cosine and color corrected measurements
• Min/Max Average and Auto Power Off
• Complete with 2 AAA batteries, and pouch