Simultaneous display of Conductivity or TDS with Temperature
Three ranges for Conductivity and TDS plus adjustable Temperature compensation factor to maintain accuracy
Automatic Temperature Compensation
Temperature compensation factor adjustable between 0 to 5.0% per °C
Min/Max and Data Hold functions
Auto Power Off with disable feature
Use optional 1413?S Conductivity Standard (EC-1413-P) for calibration
Complete with Conductivity cell and 39" (1m) cable, 9V battery, and soft case

More products EXTECH

EXTECH 475044 HIGH FORCE GAUGE DYNAMOMETER 20KG

• Range: 44 lbs, 20kg, 196 Newtons (±0.5% accuracy)
• Ideal for a wide variety of applications in the electronics, automotive, chemical, plastics and machinery industries
• Reversible display and fast/slow response mode
• Exclusive load cell measurement transducer

EXTECH MP530A MULTIPRO® HIGH-PERFORMANCE MULTIMETER

• High basic DC Voltage accuracy of 0.08%
• Wide AC Voltage bandwidth of 40Hz to 20kHz
• Rugged design with protective holster and water resistant housing
• Backlit 5000 count LCD display for high resolution (0.01mV, 0.1µA, 0.01Ohm, 0.01nF, 0.001Hz)

EXTECH 382270 QUAD OUTPUT DC POWER SUPPLY

• Two fully adjustable supplies combined with two auxiliary outputs
• Two 0 to 30V/0 to 5A outputs with selectable Constant Voltage and Constant Current modes
• Two auxiliary outputs with fixed current of 3 to 6.5V/3A and 8 to 15V/1A

EXTECH HD780 DIGITAL MANIFOLD/PRESSURE GAUGE

• Dual differential inputs for pressure and temperature
• Displays 5 types of pressure units
• For use with R22 and R410A refrigerants
• Standard 1/4 NPT male flare fittings

EXTECH EX230 12 FUNCTION MINI DIGITAL MULTIMETER WITH IR THERMOMETER

• Built-in IR Thermometer with laser pointer for locating hot spots (6:1 Distance to Target Ratio)
• AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Temperature (Type K + IR), Duty Cycle, Continuity / Diode
• 4000 count large backlit dual LCD with easy-to read digits
• Low current capability measure down to 0.1µA

EXTECH 380803 TRUE RMS POWER ANALYZER DATALOGGER

• Built-in Datalogger stores up to 1,012 readings (single record/continuous datalogging)
• Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
• True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
• Plug device to be tested directly into the Power Analyzer

EXTECH LT300 LIGHT METER

• Wide range to 40,000Fc or 400,000 Lux with max resolution to 0.01 Fc/Lux
• Relative mode indicates change in light levels, peak mode captures highest reading
• Remote light sensor on 12" (30.5cm) coiled cable - expandable to 24" (61cm)
• Utilizes precision photo diode and color correction filter
• Large LCD display with analog bargraph
• Backlight for readings in low light levels
• Complete with 9V battery, light sensor with protective cover, protective holster, and soft case

EXTECH UV510 UVA LIGHT METER

• Sensor wavelength range 320 to 390nm
• UV sensor with cosine correction measures irradiance from UVA light sources up to 20.00mW/cm²
• Backlit LCD to view in dimly lit areas
• Zero function
• Data Hold and Min/Max functions

EXTECH RT30: WIRELESS AC CIRCUIT IDENTIFIER (914MHZ) WITH EXTERNAL PROBE

• Combines non-contact voltage and light detection with RF (Radio Frequency) transmission technology
• Remotely identifies mid-run AC wiring, circuit breakers, switched lines, AC outlets, and light fixtures
• Non-contact mid-run AC wiring identification without cutting into wires
• Lighting circuit identification using built-in light sensor

EXTECH DT100M LASER DISTANCE METER

• 2" to 330ft (0.05 to 100m) measurement range
• Automatically calculates Area and Volume
• Indirect measurement using Pythagorean theorem
• Continous mode with min/max function
• Displays Sum (+) / Difference (-) of multiple readings
• Front or rear edge reference