PD20 is a pocket-sized pedometer which offers 3D Sensor design for detecting motion regardless of orientation, as well as Temperature measurements! The fully loaded PD20 has many other functions including a Step Counter, Timer, Distance meter, Speedometer, Calorie Counter, Fat-Burning meter and Storage Memory. Complete with CR2032 battery, belt-clip and nylon case with window opening for display viewing.

Features:

3D motion sensor design allows for the meter to be fully functional regardless of its orientation
Uses an intelligent algorithm to filter out non-walking movements
Functions:
- Number of Steps: 0 to 99999 (adjustable step length)
- Temperature: 14 to 122°F (-10 to 50°C)
- Calorie consumption: 0 to 99999kcal
- Fat burned: 0 to 35.9oz (0 to 999.9g)
- Distance covered: 0 to 624.99mi (0 to 999.99 km)
- Time: 12/24 hour format
- Average speed: 0 to 6.25mph (0 to 10km/h)
Coninuous Step mode records the number of steps users walked continuously through the day (records up to 7 days)
Total Step mode displays the total accumulated steps user walked after 7-day storage
Auto power saving mode when meter detects no movement for 10 minutes
Includes case with built-in clip to wear on your clothes and designed with lanyard insert hole (lanyard not included) to wear around your neck
Complete with CR2032 battery and nylon case with window opening for display viewing and belt-clip

More products EXTECH

EXTECH EA33 EASYVIEW™ LIGHT METER WITH MEMORY

• Large LCD display with advanced illuminance functions and features
• Wide measurement range to 99,990Fc (999,900 Lux) with resolution of 0.001Fc and 0.01Lux
• Luminous intensity (candela) calculations
• Store and recall up to 50 measurements, includes relative or real time clock stamp
• Ripple function excludes the effect of stray light from the primary light source measurement
• Timed-Hold, Relative in absolute value or % deviation, and Comparator function with high low alarms

EXTECH 380260 AUTORANGING DIGITAL MEGOHMMETER

• 250V, 500V, and 1000V test voltages
• Insulation Resistance to 2000MOhm
• Lo Ohm function for testing connections
• Lock Power On Function for hands-free operation

EXTECH CT20 REMOTE & LOCAL CONTINUITY TESTER

• A bright flashing LED and loud pulsating beeper indicate local continuity
• Remote continuity with the use of the remote probe
• Flashing remote probe - two lead, bi-color (red/green) LED probe allows a single user to identify up to three wires or cables at a time
• Lightweight and pocketsized, clips on and hangs from the cable(s) under test without falling off
• Great for Electricians and Helpers, Cable TV and Audio System Installers, Alarm Technicians, Plumbers, HVAC Installers etc.

EXTECH 382100 1200A 3-PHASE POWER ANALYZER/DATALOGGER

• Single phase, 3-phase/3-wire or 3-phase/4-wire systems
• Large backlighting LCD displays 35 parameters simultaneously (MW, kVAR, MVA, PF plus the voltage and current of the 3 phases)
• Displays Active Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Power Factor
• Current measurements to 1200A and Voltage measurements to 600V

EXTECH EX650 600A TRUE RMS AC CLAMP METER + NCV

• True RMS for accurate AC measurements
• 1.18" (30mm) jaw size accomodates conductors up to 350MCM
• 6000 count backlit LCD display
• Low Impedance (LoZ) prevents false reading caused by ghost voltages
• Built-in non-contact voltage detector (NCV) with LED indicator
• Built-in LED flashlight for working in dimly-lit areas

EXTECH CO30: CO (CARBON MONOXIDE) MONITOR

• Alternately displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings (cycles approximately every 6 seconds)
• Visible bright tri-colored (green, yellow, red) LED alarm indicator
• Adjustable audible alarm for readings exceeding one of the selected ranges: 25ppm, 30ppm, 35ppm, 50ppm, 100ppm or 200ppm
• ZERO Re-Calibration function
• Manual Temperature and Relative Humidity Compensation (adjustable)
• CO Calibration function in fresh air

EXTECH 382270 QUAD OUTPUT DC POWER SUPPLY

• Two fully adjustable supplies combined with two auxiliary outputs
• Two 0 to 30V/0 to 5A outputs with selectable Constant Voltage and Constant Current modes
• Two auxiliary outputs with fixed current of 3 to 6.5V/3A and 8 to 15V/1A

EXTECH EX900: EXSTIK® 4-IN-1 CHLORINE, PH, ORP AND TEMPERATURE KIT

• Includes CL200 meter, pH and ORP electrodes, reagent tablets, 4 plastic cups, weighted stand, pH buffer pouches, batteries and carrying case
• 4-in-1 Water Quality Meter measures Chlorine, pH, ORP plus Temperature with interchangeable flat surface electrodes (included)
• Flat surface electrodes work in liquids, semi-solids and solids
• Memory stores and recalls 15 readings and saves last calibrated value
• Large 3-1/2 digit (2000 count) Digital display with bargraph

EXTECH 380363 DIGITAL HIGH VOLTAGE INSULATION TESTER

• 250V, 500V and 1000V Test Voltages
• Measure Insulation Resistance to 10GOhm
• Large LCD display with analog bargraph
• Lo Ohm function for testing connections

EXTECH 380360 DIGITAL MEGOHMMETER

• Three test voltages of 250V, 500V and 1000V
• Insulation Resistance to 2000MOhm
• Safety Power Lock enables "hands free" operation for 3 minute test
• Automatic discharge when safety "Press to Test" button is released
• Continuity measurements to 200Ohm and Voltage to 600VAC