Frecventmetru digital portabil 8.5 digit 3 GHz TTi PFM3000

• 10MHz to 3600MHz or 6000MHz frequency range
• Resolution bandwidths from 300Hz to 10MHz (1:3:10)
• -120dBm typical noise floor at -40dBm ref. level/10kHz RBW
• Measurement in dBm or dBuV, mV or uW
• Zero span mode with AM and FM audio demodulation
• Trace modes of normal, peak hold and trace average
• USB interfaces for Flash drives and PC connection

 

• 0.03Hz to 3MHz frequency range
• Simultaneous display of frequency & amplitude
• High waveform quality at all frequencies & levels
• 2mV to 20V pk-pk from 50 Ohms or 600 Ohms

 

• 40 MHz sine
• 50 MHz square
• Single channel
• 100 MSa/s sample rate
• 12-bit vertical resolution

 

• 0.1Hz to 10MHz frequency range
• Independent control of pulse frequency, width and delay
• 50ns minimum pulse width
• Squarewave, double pulse & delayed pulse modes
• Free-run, gated and triggered modes
• 50 Ohm output: 0.1V to 10V amplitude

 

• 150 kHz to 2 GHz frequency range
• 10 Hz setability, +/-1ppm frequency stability
• -127 dBm to +7dBm amplitude, 0.1dB steps
• AM, FM and Phase modulation, internal or external

 

• 0.001Hz to 10MHz frequency range
• 6 digits or 1mHz resolution
• 1ppm stability and 10ppm one year accuracy

 

• Compliance quality measurements to EN61000-3-2 and EN61000-3-3
• Measures peak or rms voltage or current, real or apparent power, power factor, phase
• Tabular/histogram of 40 harmonics

 

• 1 µHz to 50 MHz range(sine and square)
• 1 µHz resolution
• 128K points at up to 125MS/s Arbitrary waveforms
• True pulse generator with variable delay and variable rise/fall

 

• Wide voltage and current range, 0 to 80 V and 0 to 80 A
• 300 watts continuous dissipation at 40 degrees C
• Versatile solution for testing dc power sources

 

• Dual independent or tracking 600 watt outputs
• PowerFlex+ design gives ultra-wide range of voltage/current combinations
• Up to 80V and up to 50A within each power envelope