OLT-55 Intelligent Optical Loss Tester is an all-in-one loss tester integrated with Stabilized Laser Source, Optical Power Meter, Optical Loss Tester, ORL Tester and Length Testing functions. It can perform automatic bidirectional loss test on single fiber with Pass/Fail assessment. With rich functions, flexible configuration and excellent user friendly design, OLT-55 is the ideal optical loss tester to completely evaluate the optical fiber link condition in FTTx, LAN and CATV network.

Features:

? All-in-one: SLS + OPM + OLT + ORL + Length test

? Optical power monitoring (Auto power trace)

? Bidirectional loss test on single fiber

? ORL test

? Pass/Fail assessment

? Automatic wavelength identification/switch (AutoID)

? Remote reference value setting

? Internal clock & fiber S/N editable

? 1000 test records (CSV) storage & management

? Data transfer to PC via USB (Driver-free)

? Auto test records save in local unit/remote unit/both units

? USB power charging

? Over 35 hours continuous operation

? Multilanguage support

? No warm-up, quick start

? High resolution color LCD

? Pocketsize, lightweight and easy-to-use

Alte produse SHINEWAY

APARAT INSPECTIE CONEXIUNI FIBRA OPTICA SHINEWAY OCI-20B

• Compatible with various connectors
• Dual channel video input (microscope) for easy viewing of male/female connectors
• Extended display on external monitor
• Audio & video recording
• Multimedia playback
• Direct read/write flash disk
• Large storage: 128MB internal memory, SD card up to 16GB
• Data transfer via USB2.0

ANALIZOR LOCATOR DEFECTE FIBRA OPTICA SHINEWAY OFL-100

• Lightweight, portable
• High precise measurement, large memory capacity (200 test curves)
• RS-232/USB data upload port
• PC software for measurement data analyzing and reporting
• Display measurement by graphics curves
• NiMH rechargeable battery support 10 hours continuous operations

ANALIZOR TRANSMISII DATE SDH/PDH/STM/E1 SHINEWAY DTA-SDH/155

• Analysis and evaluation of SDH and PDH networks andequipment up to 155Mbps.
• According to ITU.T G.821, G.826, G.828,G.829, M.2100, M.2101.
• Tandem Connection Monitoring (TCM) and APid tests.
• Support pointer adjustment test.
• Automatic Protection Switching (APS).
• Round trip delay measurement (STM-1 and E1).

TESTER MASURA PIERDERI FIBRA OPTICA CU POWER-METRU SI SURSA LASER INTEGRATE SHINEWAY OTL-50

• FTTx/PON applicable
• Optical power monitoring
• Bidirectional loss test on single fiber
• ORL test
• Pass/Fail assessment
• Storage of 1000 test records
• Data transfer to PC via USB
• USB power charging

SHINEWAY MTP-200-CWDM SERIES HAND-HELD HIGH PERFORMANCE OTDR

• Up to 18CWDM wavelengths, customized
• Dynamic Range up to 36dB
• Short dead zone:EDZ 1m, ADZ 4m
• Auto/Manual test and analysis

TESTER ETHERNET GIGABIT/BER SHINEWAY GET-100

• Electrical and optical ports with rate at 10/100/1000Mbps
• Ergonomic, creative design, and easy to carry
• IEEE 802.3, RFC1242, RFC2544 compliant
• L1/L2/L3 BER Test
• Full RFC2544 benchmark test
• Support VLAN test function
• Jitter Test

SHINEWAY SPM-50 RF SPECTRUM POWER METER

• Power histogram or spectrum chart
• Preset frequency band for fast scan
• Live testing through feeder cable system

ANALIZOR DISPERSIE MOD POLARIZARE IN FIBRE OPTICE CWDM SHINEWAY MTP-500

• ITU-T G.650 recommended method for PMD characterization:
• Accurate total PMD, PMD coefficient
• Fully support 10G/40G/100G DWDM optical network upgrade test
• Compliant with G.650.2, EIA/TIA FOTP-124 & IEC-61941
• High dynamic range for long span measurement 40dB or 200Km
• Easy to use touch screen
• External ports: RG45x1, RS232x1, USBx2, VGAx1

SHINEWAY OPM-15/25 OPTICAL POWER METER

• Interchangeable connectors: FC/SC/ST
• Dual-way power supply: 9V alkaline battery/AC adapter (optional)
• Pocketsize, lightweight and damp-dust-shock proof
• Power saving: Auto-off setting

ANALIZOR OTDR FIBRA OPTICA SHINEWAY PALMOTDR

• SM: 1310/1490/1550/1625nm (with filter), up to 45dB
• MM: 850/1300nm, 18/22dB
• Ideal for LAN/WAN/FTTx certification & trouble-shooting
• High precision measurement
• 1000 test records storage (Type C)
• USB/RS-232 data interface
• 8 hrs continuous operation/20 hrs standby
• Dust-shock proof (2m drop test)