PROMAX is presenting the new PROWATCH DEIDE3 equipment, based on technology developed on our R+D labs. PROWATCH DEIDE3 equipment, are detection, identification and continuous monitoring systems for radio and digital TV signals with remote control.

Detection of radio signals received in a specific location, in the radio as well as in the digital and analogue television bands.
Identification of each one of the signals received, obtaining the information provided by the radio broadcaster either in the signal itself or for visual and/or sound identification.
Permanent monitoring of a variable area of the radio spectrum, carrying out an analysis of the detected variations.
The equipment or measuring station can carry out the previous operations in local mode or through remote control by other analogue equipment.
It works with digital radio (DAB), terrestrial digital television (TDT) according to the DVB-T (COFDM modulation) standard, FM-RDS radio and analogue TV signals.

Optiuni recomandate

Alte produse PROMAX

GENERATOR SEMNAL TEST SATELIT SI CABLU COAXIAL 4 FRECVENTE PURTATOARE PROMAX RP-080

• 4 PILOT CARRIERS: 85 MHz, 750 MHz, 1000 MHz, 2150 MHz
• Selectable and independent carrier level for each one: from 75 to 105 dBµV
• LED indicators for each carrier output level
• 13, 18 V and 22 kHz signal detection.
• Power supply from the LNB or external DC supply.
• Ergonomic and compact format

ENCODER CUADRUPLU VIDEO/ AUDIO-> DVB-T/ TS-ASI PROMAX DT-504

• A/V INPUTS: 4 independent A/V inputs
• RF OUTPUT: 1 DVB-T multiplex
• TS-ASI OUTPUT: optional
• MPEG-2 ENCODER
• Video input: PAL/NTSC
• Audio input: Stereo/Mono/Dual/Joint Stereo

ENCODER & TRANSCODER H.264/AVC MPEG-4 HD-SDI HDMI YPBPR RGB CVBS PROMAX EN-264

• H.264/AVC (MPEG-4 part 10), High profile, Level 4.0, 4:2:0 Chrominance sampling
• TS to TS Transcoding (MPEG-2 HD to H.264 HD/SD or MPEG-2 SD to H.264 SD)
• MPEG-1 Audio Layer1 & Layer2 encoding
• 1x Dolby Digital (AC-3) or 1x MPEG-1 audio pass through transcoding
• Supports full HD 1080i encoding
• HD-SDI, HDMI, YPbPr/RGB video input interface

GENERATOR SEMNAL TV VIDEO ANALOG PAL/ NTSC/ SECAM PROMAX GV-898+/ GV-798+

• PAL / PAL60 / SECAM / NTSC Multistandard
• GV-898+ : Vestigial Side Band Modulation - VSB
• GV-798+ : Double Side Band Modulation - DSB
• YPbPr outputs
• 4:3, 16:9 & 14:9 formats (WWS signals)
• NICAM / Zweiton sound
• RS-232 remote operation

ENCODER VIDEO DVB HDTV H.264/AVC PROMAX EN-260

• H.264/AVC video encoding
• HDMI, YPbPr, composite video input interface
• MPEG-1 Audio Layer1 & Layer2 encoding
• TS over IP and TS-ASI outputs
• Ethernet remote control

APARAT SUDURA FIBRA OPTICA PROMAX PROLITE-40B

• Automatic fusion splicing on 3 axis (X,Y, Z)
• Maximum accuracy
• Fibre aligning by means of core aligning method
• Single or simultaneous axis view.
• Fibre core can be display clearly.
• 5.7" colour LCD display.
• Temperature and atmospheric pressure indicators.
• Auto check quality of cleaved end face.

HEADEND DISTRIBUTIE TRANSMODULARE TV SATELIT DVB-S -> TV DIGITAL TERESTRIAL DVB-T PROMAX DTTV

• DVB-T (DTT) output
• converts analogue/ digital video source to DVB-T with a max 200 programmes in the UHF band
• transmodulate Satellite TV channels to Digital Terrestrial Television multiplexes
• system allows to re-organise the spectrum, adding the off-air DTT channels received in the region
• encoding video-audio channels
• remotely controlled through Ethernet

RECEPTOR DIGITAL SATELIT DVB-S/S2 -> ASI-TRANSPORT STREAM PROMAX DT-302

• DVB-S/S2 IF INPUT: 2 independent DVB-S/S2 inputs
• TS OUTPUT: 2 double independent DVB-ASI outputs
• allows inserting a Conditional Access Module (CAM)
• Selection of decrypted services by name

TRANSMODULATOR SATELIT QPSK -> COFDM DVB-T PROMAX MO-162/163

• QPSK INPUT: 950 - 2150 MHz / -65 dBm to -25 dBm
• MPEG-2 TS INPUT: 2x DVB-ASI, 75 ? BNC female connector
• IF OUTPUT: Fixed at 36 MHz
• RF OUTPUT: 475 - 875 MHz (45 - 875 MHz for MO-163)

SISTEM TRAINING DVD & CD PROMAX ED-845

• theoretical-practical study of a DVD & CD player
• observe the internal composition of the mechanics
• analyze the signals that take part of the operation
• simulate several faults for the study of troubleshooting and diagnostic methods