• 10 V and 100 V ESD testing
• 25 V & 50 V signal cable insulation testing
• 250 V & 500 V Insulation testing up to 50 GO (500 V)
• Continuity testing at 200 mA or 20 mA from 0.01 O to 999 kO
• DC and TRMS AC voltage measurement
• Large backlit display
• Combined analogue and dual digital readout
• Weatherproof to IP54
• Supplied with AA alkaline

The Megger MIT415 insulation and continuity tester is designed for electrical testing by utilities, industrial, commercial and domestic electricians. The wide range of test voltages makes the MIT415 series ideal for the engineer or technician involved with combined applications of both communications circuits and power circuits such as would be found in elevator service/repair and routine maintenance. The low test voltage insulation ranges also makes the MIT415 ideal for ESD testing.

The MIT415 replaces the well-established BMM2000ESD insulation tester, gives greater functionality with simplified operation, greater application range and an ergonomically designed case.

Accesorii standard

MIT400: basic CATIV 600 V with 250 V/500 V/1000 V insulation MIT400-EN

MIT410: as MIT400 + 50 V, 100 V, PI and DAR

MIT410-EN NSN:6625-99-354-2757

MIT415: 10 V, 25 V, 50 V, 100 V, 250 V, 500 V, PI and DAR 1000-351

MIT420: as MIT410 + result storage and recall + 200 GO

MIT420-EN NSN 6625-99-169-4728

MIT420-MIN: (NATO version - no batteries) 1000-309 NSN 6625-99-169-5675 MIT430: as MIT420 with Bluetooth download

MIT430-EN MIT40X: Special applications - selectable IT voltage 10-100 V MIT40X-EN

Included accessories

Hard case 5410-420

2 wire lead set to CAT IV 600 V, consisting of: Red and black leads, probes and clips with 1 x red long probe

Calibration certificate

SP5 Switched probe (not MIT400 or MIT40X) 1002-774

Owners information user guide CD

Optiuni recomandate

Optional accessories

Replacement 2 wire test lead set 1002-001

2 wire 500 mA fused test lead set 1002-015

Rubber boot with stand 6231-802

Pouch - test and carry case 2001-322

Alte produse MEGGER

TRUSA CURENT-TENSIUNE VERIFICAREA RELEELOR DE PROTECTIE MEGGER SMRT410

• Small, rugged, lightweight and powerful
• Operates with or without a computer
• Intuitive manual operation with Smart Touch View Interface
• High current, high power output (60 Amps/300 VA rms) per phase
• Flexible output design provides up to 4-phase voltage and up to 10-phase current
• Network interface provides IEC 61850 test capabilities
• Fully automated testing using AVTS software

TESTER LUNGIME CABLURI ELECTRICE, PUTERE, TELEFONIE CATV LAN SI REFLECTOMETRU TDR MEGGER TDR900

• Full autoranging for measuring the length of power, telephony, CATV and LAN cables, provides distance to an open or short.
• Extra large, high resolution backlit LCD.
• Automatic output impedance control of 25, 50, 75, 100, 125 or 150 ohms.
• User-friendly menu on screen operation.
• Cable length calibration function.
• Internal library of 39 standard cable types.

LOCATOR SCURGERI LA PAMANT CURENTI DC IN SISTEME BATERII MEGGER BGFT 246100B

• Ground faults in ungrounded dc battery systems easily located
• Operates in high electrical noise environment
• Simplifies fault tracing by identifying fault characteristic (resistive and capacitive) magnitudes

TESTER PORTABIL RAPORT TRANSFORMARE LA TRANFORMATOARE MEGGER TTRU1

• Raport de transformare, curent de excitație și polaritate
• Până la 250 V indus, precizie de ±0,05%
• Evaluarea raportului de succes/respingere
• Detectare polaritate aditivă/subtractivă
• Curent de excitație
• Impedanță de scurtcircuit

TESTER DE RELEE CONFORM IEC 61850 MEGGER GOOSER

• Reliable testing of IEC61850 relays using a conventional relay test set
• Separate Ethernet ports for the substation LAN and the controlling PC forming a Safe Substation Bus Access Point
• Seamless interaction between SCL GOOSE and GOOSE "sniffing"
• GOOSE merge - SCL GOOSE vs captured GOOSE for network troubleshooting and SCD file validation at FAT
• Stand alone functionality - Download a configuration and run

PHOTOVOLTAIC KIT MEGGER - PVK320

• PVM210 irradiance meter
• AVO410 CATIV TRMS multimeter
• C4 solar connectors to 4 mm standard plug test leads
• MC3 to MC4 adapter test leads
• PV kit storage pouch

LOCATOR TRASEU CABLURI MEGGER VLOC3-PRO

• Afişarea permanentă a adâncimii şi curentului Moduri de afişare multiple (clasic, vector, plan, transversal, sondă, alerte)
• Afişaj color LCD de mari dimensiuni cu senzor pentru iluminare automată
• Domeniu mare de frecvenţe pentru o localizare optimă în orice condiţii
• Ceas real de timp pentru certificarea localizării

TESTER TDR LOCALIZARE DEFECTE CABLURI MEGGER TDR1000/3

• minimum resolution of 0.1 m and a 5 km maximum range
• Simple operation.
• AUTO set up for instant use.
• Ultra fast pulse for near end fault identification.
• Trace HOLD feature to allow comparison between cables.
• IP54 rating offers real life working.
• Designed for use on all metallic cable pairs.

PRIMARY CURRENT INJECTION TEST SYSTEM MEGGER ODEN AT

• Most advanced primary current injection test system to simplify all types of switchgear and CT commissioning, ground grid, circuit breaker testing and more
• Modular design to permit optimal user configuration of output current vs. unit size
• Compact transport cart facilitates portability into switchgear rooms with limited space
• Unique I/30 function allows the current to be pre-set using low current to prevent test sample heating, thus eliminating corruption of test result

MEGOHMETRU IZOLATIE 10000V 10KV MEGGER S1-1068/2

• Rezultate fiabile în substaţii zgomotoase
• Teste precise cu RE>Act™
• Control de la distanţă pentru testare mai sigură şi mai ușoară
• PI Predictor™ reduce timpul de testare la jumătate
• Suită completă de diagnosticare cu capacitate PDC

Tester izolatie 500V testare ESD Megger MIT415PRODUS OBSOLET ( * SCOS DIN UZ )

Tester izolatie 500V testare ESD Megger MIT415
PRODUS OBSOLET ( * SCOS DIN UZ )