Placa PCI Digital I/O 32-canale izolate optic Keithley KPCI-PIO32IOA

• 32 optically isolated solid-state relays and digital inputs
• Direct, non-polarized switching and sensing: DC up to 60VDC, AC up to 30Vrms
• High load current capability up to 350mA

 

• Five instruments in one (IV Source, IVR Measure)
• Six models: 20 - 100W DC, 1000W pulsed, 1100V to 1uV, 10A to 10pA
• Source and sink (4-quadrant) operation
• 0.012% basic measure accuracy with 5½-digit resolution

 

• 96 or 24 TTL-level compatible digital I/O lines
• Bi-directional I/O
• High-current driver capability, 15mA (source) and 64mA (sink)

 

• 6.5 digit
• 38 ppm accuracy
• 11 measurement functions cover most commonly measured parameters

 

• Simplifies laser diode LIV testing prior to packaging or active temperature control
• Integrated solution for in-process LIV production testing of laser diodes at the chip or bar level
• Sweep can be programmed to stop on optical power limit
• Programmable pulse on time from 500ns to 5ms up to 4% duty cycle
• Pulse capability up to 5A, DC capability up to 1A

 

• 12-bit resolution
• Throughput of up to 400kS/s
• Digital I/O scanning speeds of up to 3MHz
• 16 single-ended or 8 differential analog inputs
• 23 digital I/O lines

 

• Precizie 0,0006% DCV (un an)
• Sensibilitate 1nV, 100nΩ și 10pA
• Măsurare curent continuu în circuit și frecvență 15MHz

 

• 6.5 digit DMM
• Single-instrument solution for continuity and hi-pot type leakage resistance measurements
• Programmable constant V source (50-500V) supports high speed, high resistance measurements
• Programmable constant I source (0-50mA) with dry circuit clamp helps prevent device stress or damage during low resistance measurements

 

• Precizie 0,0014% DCV (un an)
• Digitizor 1.000.000 citiri/s
• Afișaj tactil
• Sensibilitate tensiune DC: 10 nV
• Sensibilitate curent: 1 pA
• Sensibilitate rezistență: 0,1 µΩ

 

• Source voltages up to 5kV, negative or positive polarity
• Up to 5mA compliance current
• Low output ripple for precision sourcing