Osciloscop analogic 2 x 30 MHz GW Instek GOS-6031

Cod: Godwill Instek GOS-6031


 

Brosura produs PDF, 0.2 Mb

Descriere

  • 30 MHz bandwidth
  • 2 analog channels
  • 1mV/div ~ 20V/div
  • Cursor Measurement, 6 Digit Frequency Counter, 10 sets Memory for Front Panel Setting Save & Recall
  • CRT Readout
  • ALT, MAG Function (x 5, x 10, x 20)
  • Vertical Mode Triggering
  • TV Synchronization
  • Buzzer Alarm & LED Indicators
 

Accesorii standard

  • User manual x 1
  • Power cord x 1
  • GTP-060A-4: 60MHz (10:1/1:1) Switchable Passive Probe (one per channel)
 

Optiuni recomandate

  • GTL-110  Test lead, BNC-BNC heads
  • GTC-001  Instrument cart, 450(W) x 430(D)mm (120V input socket)
  • GTC-002  Instrument cart, 330(W) x 430(D)mm (120V input socket)
 

Alte produse GW INSTEK

GOODWILL INSTEK GPR-M SERIES

• Constant Voltage and Constant Current Operation
• Internal Select for Continuous or Dynamic Load
• Low Ripple and Noise
• Overload and Reverse Polarity Protection

 

OSCILOSCOP ANALOGIC 2 X 100 MHZ GW INSTEK GOS-6103C

• 100 MHz bandwidth, Delayed Sweep
• 2 analog channels
• 10 Sets Memory for Front Panel Setting Save & Recall
• Built-In 6 digits Universal Counter
• Time Base Auto-range
• Cursor Readout with 7 Measurements

 

GOODWILL INSTEK APS-7000E SERIES

• Only 88mm(2U) case height
• Measurement function comprises Voltage, Current, Power, Current(peak), Frequency, Power Factor
• 10 sets of the Test mode simulate power transient output
• 10 sets of Preset allow users to store ten settings

 

GOODWILL INSTEK PEL-3000 SERIES

• Commands are compatible with Kikusui PLZ-4W model.
• Dynamic(Switching) Function:0.0166Hz ~20kHz
• Soft Start Function:Off / On(1~200ms, Res:1ms)
• Adjustable OCP / OVP / OPP / UVP Setting
• Short Circuit Function

 

GOODWILL INSTEK LCR-8000G SERIES

• Large LCD Display with Intuitive Interface
• Full Measuring Functions with DUT V/I Monitor
• PASS/FAIL Function ( abs, % or delta) with Judgment Alarm
• DC Resistance Measurement
• Multiple Step Mode

 

OSCILOSCOP ANALOGIC 2 X 30 MHZ GW INSTEK GOS-6030

• 30 MHz bandwidth
• 2 analog channels
• 1mV/div ~ 20V/div

 

GOODWILL INSTEK LCR-900 SERIES

• Parallel/Series Testing Mode
• Sorting Mode for Quality Control
• 2Wire or 5Wire Measurement Available
• Data Hold and Zero Mode Supported

 

GOODWILL INSTEK GOM-802

• 30000 Counts Display
• High Accuracy 0.05%
• Hi/Lo Comparator and Limit Percent Setting
• Measurement of REL, Actual and % Value
• Continuous or Triggered Measurement Mode

 

GOODWILL INSTEK GFG-3015

• Built-in 6 Digits Counter up to 150MHz/High Resolution
• Output Waveform : Sine,Square,Triangle,Ramp,Pulse,Sweep,Gate or Burst
• INT/EXT AM/FM Modulation
• GCV Output for Synchronization

 

GOODWILL INSTEK PPS-3635

• 100 Sets of Memory
• Self Test and Software Calibration
• Meets UL CSA IEC Safety Regulation
• Auto Step Running With Time Setting